Asgardo Posted July 22, 2014 Share Posted July 22, 2014 Hello, I installed Niresh maverick 10.9 on my system with default settings: asrock z77 pro4-m 16gb ram corsair vengeance curcial m4 256 gb i5 3570K Gigabyte GTX 660 OC but at first reboot i get stucked at this point: http://s12.postimg.org/s66jymh0d/foto.jpg I tryed this kind of boots: GE=NO -v -f GE=NO -v GE=NO -v -f USEkernelcache=no but i always get stuck at that point. In chat somebody told me that it's a GPU problem and to try disabling some kext but now i'm at work and i cannot test ^^ fsck -fymount -uw /mkdir /kext_backupcd /System/Library/Extensionsmv AppleIntelHD AppleIntelSNB AppleIntelFramebuffer AMDRadeon ATIGeForce NVDA* /kext_backuprm ../Caches/com.apple.kext.caches/Startup/kernelcache Link to comment Share on other sites More sharing options...
Pimentel Posted July 22, 2014 Share Posted July 22, 2014 Hello I never advice any distro, this include niresh,iatkos,... and others because is waste of time... choose retail, is the best I gave to you a retail solution to install OSX... see that Other, your hardware is very good und i believe that GPU will be recognized OOB. 1 Link to comment Share on other sites More sharing options...
Asgardo Posted July 22, 2014 Author Share Posted July 22, 2014 Thank you! i'll try when i go back from work Link to comment Share on other sites More sharing options...
Allan Posted July 22, 2014 Share Posted July 22, 2014 Hi, and Welcome. Read this: Chameleon’s common bootflag Will help you a lot. Use this flag: GraphicsEnabler=No 1 Link to comment Share on other sites More sharing options...
Asgardo Posted July 22, 2014 Author Share Posted July 22, 2014 Thankyou very much, i'll try asap. For first i want to rebuild a clean install with the retail version. Then we'll see what happens ^^ Link to comment Share on other sites More sharing options...
Asgardo Posted July 22, 2014 Author Share Posted July 22, 2014 Nothing works ( with niresh installation ). When i start in safe mode i get stuck before the final configuration, at apple logo. I'll rebuild a retail installation now Link to comment Share on other sites More sharing options...
Asgardo Posted July 22, 2014 Author Share Posted July 22, 2014 i fixed loading the system in -v -x -f GraphicsEnabler=No dart=0 What shall i do now to fix all the errors ? Graphics flickr, audio isn't installed Link to comment Share on other sites More sharing options...
Pimentel Posted July 22, 2014 Share Posted July 22, 2014 Hello Did you installed OSX with sucess? If yes, now comes the post-installation, make this: After install OSX, intall bootloader.Download clover(bootloader) and install it: http://sourceforge.net/projects/cloverefiboot/ If your mobo has uefi enabled in Bios, install Clover in UEFI mode, if not, install Clover in normal mode(don't check UEFI mode install in Clover)After that use Hackintosh Vietnam to adjust everything...* In the section CPU choose the CPU/Model of your computer (it will serve to create your SMBIOS within config.plist file)* In SSDT section, select the Custom option, config.plist will be created on your desktop and you put that in EFI/Clove folder* In Section Kext select AICPUPM patch (something like that lol) to correct AICPUPM and make OSX work well for you ...* In section Grafik select an ideal option for your grafica intel ... up to you to configure and view the model description and screen resolution* After selecting some important settings, but does not select anything useless or will mess up all your hard work* If I am not mistaken in section Kext has the option to install FakeSMC, install this kext because it is very important for OSX and is the only kext really necessary.*In Tools section select SSDT generate, to generate a SSDT in Extra folder in HDD, get this SSDT from Extra folder and put in EFI/Clover/ACPI/patched folder, after that delete Extra folder in HDDMake these all these stepsOBS: Don't re-boot before make these steps... 1 Link to comment Share on other sites More sharing options...
Asgardo Posted July 22, 2014 Author Share Posted July 22, 2014 No i just get into the niresh system but system is unstable ( graphic flickr ). The retail installation doesn't work in GE=NO. How shall i get it working ? I think i want to try a clean retail version... installer in -v dart=0 GraphicEnabler=No get in kernel panic Link to comment Share on other sites More sharing options...
Pimentel Posted July 22, 2014 Share Posted July 22, 2014 HelloUse retail version please...In clover try press [space] em select Without Caches... waite a while of time until get installation screen... if don't work, try change for chameleon...You need press 1 while cursor blinking to get chameleon Screen... after that try boot with -f -v -x See if you can get Installation Screen and install OSX 1 Link to comment Share on other sites More sharing options...
Asgardo Posted July 22, 2014 Author Share Posted July 22, 2014 nothing Link to comment Share on other sites More sharing options...
Pimentel Posted July 22, 2014 Share Posted July 22, 2014 Hello Configure Bios: http://olarila.web337.kinghost.net/forum/viewtopic.php?f=2&t=1804 If your mobo has UEFI option enable it 1 Link to comment Share on other sites More sharing options...
Asgardo Posted July 22, 2014 Author Share Posted July 22, 2014 injected nullpower / fakesmc and booted in -v -f stucked at "Still waiting for root device" Link to comment Share on other sites More sharing options...
Pimentel Posted July 22, 2014 Share Posted July 22, 2014 Hello Are you using that solution i gave to you??? If yes, isn't necessary add nothing... that image is already prepared to just copy to usb stick and boot... did you enabled AHCI in bios??? 1 Link to comment Share on other sites More sharing options...
Asgardo Posted July 22, 2014 Author Share Posted July 22, 2014 RE! i installed it finally ^^... now i have to read the post-installation... have to install 660 gtx, audio, network ecc... Link to comment Share on other sites More sharing options...
Pimentel Posted July 22, 2014 Share Posted July 22, 2014 HelloGood to hear this... but... what method did you use to install OSX? that method that i gave to you??? 1 Link to comment Share on other sites More sharing options...
Asgardo Posted July 22, 2014 Author Share Posted July 22, 2014 I installed it... now i'm stucked at "missing bluetooth controller transport!" the things i did: installed os installed clover 2k installed audio, network kext and then the gfx kexk. so i rebooted with the 660 gtx plugged in ( before it was disconnected from mobo ) and it stopped working, WITH or WITHOUT the nvidia plugged in the pcie slot. system don't boot in any way ( -x -v -f graphicenabler=no dart=0 ) Link to comment Share on other sites More sharing options...
Pimentel Posted July 22, 2014 Share Posted July 22, 2014 Hello What GFX kext you installed??? Isn't necessary install nothing GFX kext... please remove this gfx kext... GTX 660 works OOB(without modifications) 1 Link to comment Share on other sites More sharing options...
Asgardo Posted July 22, 2014 Author Share Posted July 22, 2014 how can i remove now the kext ? :\ Link to comment Share on other sites More sharing options...
Pimentel Posted July 23, 2014 Share Posted July 23, 2014 Hello Boot with usb installer... type -s in Chameleon Screen... To get single user mode... I'll use as example Noname.kext and type: cd System/Library/Extensions/ rm -rf Noname.kext Simple Some times is necessary type: mount -uw / to mount partition... if you see this in single use mode... isn't necessary type... 1 Link to comment Share on other sites More sharing options...
Allan Posted July 23, 2014 Share Posted July 23, 2014 Try this flag: -f -v GraphicsEnabler=No PCIRootUID=0 Read here about some issues into Boot. http://www.insanelymac.com/forum/topic/298027-guide-aio-guides-for-hackintosh/?p=2030020 1 Link to comment Share on other sites More sharing options...
Asgardo Posted July 23, 2014 Author Share Posted July 23, 2014 Since i have these troubles... what about if i give a shot for yosemite? :> Link to comment Share on other sites More sharing options...
Pimentel Posted July 23, 2014 Share Posted July 23, 2014 Hello No... Yosemite is Developer Preview... don't work well, very unstable.... Just make waht i said to you make... remove that gfx kext... and try boot... Link to comment Share on other sites More sharing options...
Asgardo Posted July 23, 2014 Author Share Posted July 23, 2014 Try this flag: -f -v GraphicsEnabler=No PCIRootUID=0 Read here about some issues into Boot. http://www.insanelymac.com/forum/topic/298027-guide-aio-guides-for-hackintosh/?p=2030020 This fix doesn't work. Now i try deleting all gfx kexts Link to comment Share on other sites More sharing options...
Asgardo Posted July 23, 2014 Author Share Posted July 23, 2014 Hello Boot with usb installer... type -s in Chameleon Screen... To get single user mode... I'll use as example Noname.kext and type: cd System/Library/Extensions/ rm -rf Noname.kext Simple Some times is necessary type: mount -uw / to mount partition... if you see this in single use mode... isn't necessary type... SUPER! ok it loads ( have to flag always the USB ownership... but i'll fix ) now... what kext i have to install to get the 660 gtx working ? There is no official driver in nvidia website for my gfx REMOVING all gfx kexts ( ATI - AMD - AppleIntelHd - GeForce - NVDA ) the system loads. But when i updated to 10.9.4, this reinstalled all the kexts. What kexts shall i delete now ? Link to comment Share on other sites More sharing options...
Recommended Posts