Tino2 Posted March 7, 2014 Share Posted March 7, 2014 Dear Members I have a Asus H87I Plus and it works really well and stable. I have an edited Dsdt which works good for the audio and Graphics. Speedstep is working on 3 Steps (Idle 8, Normal 31, Turbo 35). There is no Graphicscard in the System right now. The Problem with sleep is the computers shut itself off, but after 2 seconds it turns it self on again. It won't boot up instead it makes 2 on and off loops and then it reboots to osx. I already tried to turn off WOL in the Bios but it looks like this is not the Problem. Might im just totally off, but i couldn't find any similar behaviour in the internet. If someone has a Clue what might cause this it would be nice to get some hints. Greets System H87I Plus, I7 4770s, DSDT H87I.zip Link to comment Share on other sites More sharing options...
toleda Posted March 8, 2014 Share Posted March 8, 2014 The Problem with sleep is the computers shut itself off, but after 2 seconds it turns it self on again. Delete 2 lines, below, from the dsdt. Compile, for the compile errors, "Name already exists...", delete those lines as well. Compile, save as ACPI Machine Language Binary and install. Store (0x8000000C, \_SB.PINX) \_SB.ISMI (0x90) Link to comment Share on other sites More sharing options...
Tino2 Posted March 8, 2014 Author Share Posted March 8, 2014 Thank you this solved the automatic restart issue, the computer enters sleep mode well. On problem ist still there, if i wake it up the status light changes and the HDD Led shows activity. But there is no display signal, after 5 seconds the computer reboots. Link to comment Share on other sites More sharing options...
Tino2 Posted March 9, 2014 Author Share Posted March 9, 2014 OSX 10.9.2 solved the rest of the sleep Problem. Thanks for the support, the Asus H87I Plus runs now fine. Sound and Lan need Kexts everything else oob. Link to comment Share on other sites More sharing options...
Fabio1971 Posted March 9, 2014 Share Posted March 9, 2014 Audio : https://github.com/toleda/audio_ALC887 Lan : http://www.insanelymac.com/forum/topic/205771-appleintele1000ekext-for-108107106105/ Fabio Link to comment Share on other sites More sharing options...
Tino2 Posted March 9, 2014 Author Share Posted March 9, 2014 Thanks, its working fine now. To mention for builders, the DVI Port must be used, HDMI works only in Combination with the DVI. Link to comment Share on other sites More sharing options...
Tino2 Posted April 12, 2014 Author Share Posted April 12, 2014 Additional Info for the H87I with sleep failures: Pmset -g --> If autopoweroff=1 disable it with sudo pmset -c autopoweroff 0 Link to comment Share on other sites More sharing options...
Funky frank Posted August 12, 2014 Share Posted August 12, 2014 Have the same problem on my ASUS B85G-M (intel B85) with a i7 4770... The system restarts after waking up. The immediate wakeup is removed since I also removed the 2 lines from dsdt like toleda suggested. But the system still restarts after wakeup. I use 10.9.4 and Clover. Here is my DSDT for ASUS B85G-M. Everything seems to work good, AppleLPC is loaded and IntelGraphics HD4600 has proper power management using AGPM: DSDT.aml.zip In clover I use the kexts: - NullCPUPM (since I use kernel CPU PM) - recent GenericUSBXHCI (I already tried boot arg switches "-gux_defer_usb2" and "-gux_no_idle" without any effect) In clover config I enabled: - AsusCPUPM / AppleCPUPM patch - Kernel CPU PM patch / also patched the kernel I use an ATI HD5570 with Eulemur personality which seems to work out of the box. Display standby works fine. Toleda, could you take a look on my config ? Regards Link to comment Share on other sites More sharing options...
Recommended Posts