Jump to content

Tino2

Members
  • Content count

    16
  • Joined

  • Last visited

About Tino2

  • Rank
    InsanelyMac Protégé
  1. Hey, I'm currently working on a Nuc with I218V Lan card. My Problem occurs only after wake from sleep. WOL or USB Wake works fine, but with every wake the ethernet connection is lost until a reboot. I tried the 3.1.0 as well as the 2.5.4 neither of them is solving the problem. With my other build on a i217 i had none of these problems. Someone has an idea of the cause?
  2. Additional Info for the H87I with sleep failures: Pmset -g --> If autopoweroff=1 disable it with sudo pmset -c autopoweroff 0
  3. Tino2

    GA-Z87X-UD3H sleep wake issue

    Wake On Lan is disabled in the Bios? Similar Issue, but maybe not the same, for me it solved the Problem. http://www.insanelymac.com/forum/topic/296650-h87i-plus-sleep-reboot-problems/ Edit: Heard of Generic USBXHCI Kext but never used..
  4. Had a similar Issue, switch Res x solves it in the free version.... You can force manually the 50 / 60 Hz mode. (for 1080p and not 4k)
  5. Tino2

    Hd 7750 Powercolor 1Gb

    It looks like the card is damaged, its not working on linux and on windows it won't get recognised anymore .... Thanks for your suggestions and help.
  6. Thanks, its working fine now. To mention for builders, the DVI Port must be used, HDMI works only in Combination with the DVI.
  7. OSX 10.9.2 solved the rest of the sleep Problem. Thanks for the support, the Asus H87I Plus runs now fine. Sound and Lan need Kexts everything else oob.
  8. Thank you this solved the automatic restart issue, the computer enters sleep mode well. On problem ist still there, if i wake it up the status light changes and the HDD Led shows activity. But there is no display signal, after 5 seconds the computer reboots.
  9. Dear Members I have a Asus H87I Plus and it works really well and stable. I have an edited Dsdt which works good for the audio and Graphics. Speedstep is working on 3 Steps (Idle 8, Normal 31, Turbo 35). There is no Graphicscard in the System right now. The Problem with sleep is the computers shut itself off, but after 2 seconds it turns it self on again. It won't boot up instead it makes 2 on and off loops and then it reboots to osx. I already tried to turn off WOL in the Bios but it looks like this is not the Problem. Might im just totally off, but i couldn't find any similar behaviour in the internet. If someone has a Clue what might cause this it would be nice to get some hints. Greets System H87I Plus, I7 4770s, DSDT H87I.zip
  10. Tino2

    Hd 7750 Powercolor 1Gb

    Thanks for your input, it looks your right the inject is not necessary. If i boot the System now with -s -v i get the FB loaded. If i try to start OSX the System hangs at IOPPF: XCPM Mode Someone has an Idea what might cause this?
  11. Tino2

    Hd 7750 Powercolor 1Gb

    I know, but the system gets stuck and is not reacting without Fake Id. I dont know why its stuck when booting, the Picture above shows when the boot stucks. I connected a cable but its not working, no output, no Signal to the Display. Do i need to disconnect the hd4600? I dont know where he problem lies Dsdt, defective Mb wrong system definition?
  12. Tino2

    Hd 7750 Powercolor 1Gb

    0x683f1002 is the closest in the kext, so i think its right. I removed the FakeId part, now the pc is stuck with Bluetoothhostcontroller ..... kiOUSBHighSpeedSplitError error - no more metries -bailing out -- 0x5000 IOPPF: XPCM mode In safe mode it is stuck as well: It maybe looks like usb issues but, normally the system will start after this messages. I also tried with the Full Id as Fake ID (0x683f1002) the same problem as above.
  13. Tino2

    Hd 7750 Powercolor 1Gb

    Here you go... Thanks for your effort. BTW i meant Fake ID seems not to pass over to OSX, may also a user made problem. DarwinDumper_2.8.8_AMI_X64_2636_Mav_Tino.zip
  14. Tino2

    Hd 7750 Powercolor 1Gb

    Thanks, i startet with a new DSDT and applied 8 Series Clean compile, afterwards P0P patch and then Graphics patch.Without Injection Osx is not booting. With Clover Ati Injection Osx Boots up, Fake Id not necessary. But OSX don't recognise the card, the device ID is wrong, the System report shows this issue. IOReg shows the loaded frame buffer of the Graphics is loaded. How do i get the correct device ID loaded? (as far is i know 0x683f) Fake ID is not working. ioreg Dsdt.zip
  15. Tino2

    Hd 7750 Powercolor 1Gb

    Hello Members I got a Problem with the 7750 1Gb Powercolor, my System runs with Clover Bootloader. Without Injection KernelPanic Without Fake ID KernelPanic With Fake ID and Injecton Boot possible The Framebuffer gets loaded, but i have no Signals at the Displayport/HDMi/Dvi Port IoReg shows wrong device ID 0x0000 Shows Framebuffer chosen in Clover (tried Aji, Buri, Dashimaki etc) Tried also a DSDT edit but no success so far, if someone has an Idea i would like to hear it please. In the Attachment is the IoReg and Dsdt if someone needs them. If there is a Guide im pleased to know about it, but google gave so far no Solutions. System: Ga-H87N-Wifi, i7 4770s, HD 7750, 250Gb SSD, Mavericks 10.9.2 IoReg + DSDT.zip
×