GT330M + ML 10.8.3

[jkzcb]

I have a problem,

Notebook Toshiba A660-11M

Satellite A660-11M - Toshiba MountainLion retial 10.8.2 updatet to 10.8.3 + New Nvidia CUDA Driver (cudadriver-5.0.45)

Graphics GT330M 1024MB DDR3 (0x0a2910de)

I7 720QM CPU

The system starts properly once every 5-10

With GraphicsEnabler = Yes hangs on apple.

With GraphicsEnabler = No I have a Black screen (suspended, not responding)

When the system start properly, I have QE CI, full resolution.

When I delete Geforce.kext, NVDANV50Hal.kext, NVDAResman.kext, of course, the system starts every time but without QE CI and 1024x768

Adding ID to the info.plist does not change anything.

Kext from DP1 - DP4 does not change anything.

Graphics card inserted into dsdt does not change anything. (I hope I did it right)

 

The system gets up when he wants to.

As already start it works perfectly.

I should add that with 10.7.2 this issue does not exist.

Every time boots correctly with QE CI. Do not crash.

Thank you for any suggestions.

Sorry for my Englisch.

[jl4c]

I have the same problem with this graphics on my VAIO VPPCW25FL, always black screen. Only works on an external display with full resolution but WITHOUT acceleration (QE/CI).

[iFIRE]

NVEnabler 64.kext.zip

[jkzcb]

Unfortunately the same symptoms as with GraphicsEnabler or any other injector.

NVEnabler Unknow Device, NVEnabler probe fails.

Is the problem may be that the Video card bios is probably in the main computer bios?

I can not read graphics card BIOS

[Rampage Dev]

Have you tried my guide?

[jkzcb]

Thanks Rampage Dev but QUADRO & GEFORCE MAC OS X DRIVER RELEASE 304.00.05 is not for GT300m right?

[feng]

maybe，you use the dsdt with the card information，especially，you must need the information of nvcap~

eg:

	    Device (PEGP)
	    {
		    Name (_ADR, 0x00010000)
		    Device (GFX0)
		    {
			    Name (_ADR, Zero)
			    Name (_SUN, One)
			    Method (_DSM, 4, NotSerialized)
			    {
				    Store (Package (0x16)
					    {
						    "@0,compatible",
						    Buffer (0x0B)
						    {
							    "NVDA,NVMac"
						    },
						    "@0,device_type",
						    Buffer (0x08)
						    {
							    "display"
						    },
						    "@0,name",
						    Buffer (0x0F)
						    {
							    "NVDA,Display-A"
						    },
						    "@1,compatible",
						    Buffer (0x0B)
						    {
							    "NVDA,NVMac"
						    },
						    "@1,device_type",
						    Buffer (0x08)
						    {
							    "display"
						    },
						    "@1,name",
						    Buffer (0x0F)
						    {
							    "NVDA,Display-B"
						    },
						    "NVCAP",
						    Buffer (0x18)
						    {
							    /* 0000 */    0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x00,
							    /* 0008 */    0x0C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0b,
							    /* 0010 */    0x00, 0x00, 0x00, 0x00
						    },
						    "VRAM,totalsize",
						    Buffer (0x04)
						    {
							    0x00, 0x00, 0x00, 0x38
						    },
						    "device_type",
						    Buffer (0x0C)
						    {
							    "NVDA,Parent"
						    },
						    "model",
						    Buffer (0x17)
						    {
							    "NVIDIA GeForce GTX 260"
						    },
						    "rom-revision",
						    Buffer (0x5)
						    {
							    "3434"
						    }
					    }, Local0)
				    DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))
				    Return (Local0)
			    }
		    }
	    }

 

you need add yours information in the address ：Name (_ADR, 0x00010000) and change some value according your graph ，eg：nvram，model，and so on

of course，it must Coordinate with the kext of ml 10.8.3 for nv Graphics，the nvcap information you can get useing an app named nvmaker or idsdt ~i use the idsdt，bacause the nvmaker can't run in the ml 10.8.3

 

if do it,and then a Black screen welcome :wink2:

you ，must change your nvcap ，you can use that：

"NVCAP",
						    Buffer (0x18)
						    {
							    /* 0000 */    0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0f, 0x00,
							    /* 0008 */    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07,
							    /* 0010 */    0x00, 0x00, 0x00, 0x00
						    },

good luck!

so,my ENGLISH IS POOR TOO!@

[Rampage Dev]

Thanks Rampage Dev but QUADRO & GEFORCE MAC OS X DRIVER RELEASE 304.00.05 is not for GT300m right?

 

All the same. Also DSDT injection would work as well.

[dethmatx]

Have you tried my guide?

Rampage i done installing my Nvidia GeForce gt330m 1gb on my hackintosh (of course) thanks to you about your guide but i wanna do a coment, your guide dont says what version of mac are supported, in the web installer i was unpack and in the script installer just show macpro3.1 macpro4.1 and macpro5.1 nothing more machines are suported there, just i changed the smbios version and i was installed ok on my machine, after install, i dont use the filenvram.dylib  for my machine because with that just i had a black screen, in org.chameleon.boot.plist i dont use the nvda_drv=1, just i used graphics enabler and this was booted ok, the fps now are increased, the vidual effects was increased and always grahics are increased, thanks about your guide, because that was the first step to find my solution

 

 

im running mountain lion 10.8.3 with dsdt, without efi strings

my lappy: Samsung R480-JT01CL (CL because im Chilean)

wifi: atheros 9285

lan: realtek (ill edit my chipset later but is doesn't support)

hdd: western digital scropio blue 5400 rpm 500gb

audio: alc269

graphics: nvidia geforce gt330m (gt216) 1gb pci-e 16x

proc: intel core i3 2.13ghz x2 logical threads and x4 with hyperthreading

[Bungo]

Hi,

You can start here