hi all,
is there a way for installing mountain lion with kexts on this board?
thanks.
11 replies to this topic
#1
Posted 28 April 2012 - 09:55 PM
#2
Posted 28 April 2012 - 10:57 PM
I have the Asus P6T SE also .. I have successfully installed DP1... but I am still struggling with the DP3...
when installing DP3, I also used the USB installation method with Chameleon 2.1 for MLion like DP1. The installation USB boot ok.. after selecting language , disk and then it stops... an installer_log window opened up and another window asked you to restart or shutdown.
any help
I have a Nvidia 9800 card.
when installing DP3, I also used the USB installation method with Chameleon 2.1 for MLion like DP1. The installation USB boot ok.. after selecting language , disk and then it stops... an installer_log window opened up and another window asked you to restart or shutdown.
any help
I have a Nvidia 9800 card.
#3
Posted 30 April 2012 - 03:36 AM
http://dl.dropbox.co...29-Apr-2012.txt
#4
Posted 11 May 2012 - 03:09 PM
finally fix the problem.. Now writing with DP3 working on the Asus P6TSE board with GT9800 512M.
For unknown reason, DP3 cannot be installed on a fresh disk for me... what I have done
- create a USB stick to boot and install DP1 on a hard disk
- after installation, install the Chamelion 2.1svn r1820 for MLion. to the hard drive. remember to select custom installation and check SMBIOS for iMac12. Then boot up and set the user name etc.
- create another USB stick to boot and install DP2 on the same hard disk. It will upgrade DP1.. all the desktop, software installed in DP1 are there.
= after installation successful... create another USB stick to boot and install DP3 on the same hard disk...
- now boot the DP3 hard disk , go to applestore and upgrade it...
I have to add the Realtek ethernet Kext to the IOnetworkingfamily.kext. and also change the appleHDA.kext for sound.
in the Extra folder
- no need to add NVenabler64. Just use Graphicsenabler=Y
- dsdt.aml has to be there.
Good Luck
For unknown reason, DP3 cannot be installed on a fresh disk for me... what I have done
- create a USB stick to boot and install DP1 on a hard disk
- after installation, install the Chamelion 2.1svn r1820 for MLion. to the hard drive. remember to select custom installation and check SMBIOS for iMac12. Then boot up and set the user name etc.
- create another USB stick to boot and install DP2 on the same hard disk. It will upgrade DP1.. all the desktop, software installed in DP1 are there.
= after installation successful... create another USB stick to boot and install DP3 on the same hard disk...
- now boot the DP3 hard disk , go to applestore and upgrade it...
I have to add the Realtek ethernet Kext to the IOnetworkingfamily.kext. and also change the appleHDA.kext for sound.
in the Extra folder
- no need to add NVenabler64. Just use Graphicsenabler=Y
- dsdt.aml has to be there.
Good Luck
#5
Posted 11 May 2012 - 03:25 PM
I have the same mobo with an i7 930 cpu. Hows the general feel MountainLion compared with Lion, is it faster more stable etc etc? I mean would it be worth upgrading when they release it? I have Snowleopard, Lion and Win 8 on this computer but what I use most of the time is actually Snowleopard.
#6
Posted 11 May 2012 - 03:51 PM
I have windows 7, Lion and now MtLion.. I erased Snow already....For the limited time I used, MtLion is faster.. Safari is better than before..
I recommend an upgrade.. Keeping Snow only for the reason of old software that run the PowerPC code.
I recommend an upgrade.. Keeping Snow only for the reason of old software that run the PowerPC code.
#7
Posted 11 May 2012 - 11:41 PM
Ok thanks
#8
Posted 23 May 2012 - 11:55 PM
Can you link the version of bootloader have you used to boot installation disk? My Verbose get stuck at usbmsc....
#9
Posted 24 May 2012 - 01:34 AM
attached is the loader and the Extra folder.. Enjoy.
regards
regards
Attached Files
#10
Posted 24 May 2012 - 09:20 AM
Tnx I will get a try asap
#11
Posted 30 September 2012 - 10:53 AM
#12
Posted 05 November 2012 - 01:24 AM
I`m running ML 10.8.2 on my Asus P6T SE and it`s working good.
I made two partitions on my (60 gig SSD) hard drive, one for Chameleon (so it can boot), the extra folder, a sep folder for the kext this mobo needs and the installation dmg. This way I have a backup and a fast way to re install if I need. I goes faster too to install from a harddrive than an external usb thumb drive.
I have the Sapphire HD 5750 video card and the i7 930 cpu.
I made two partitions on my (60 gig SSD) hard drive, one for Chameleon (so it can boot), the extra folder, a sep folder for the kext this mobo needs and the installation dmg. This way I have a backup and a fast way to re install if I need. I goes faster too to install from a harddrive than an external usb thumb drive.
I have the Sapphire HD 5750 video card and the i7 930 cpu.
Attached Files
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users



Sign In
Create Account











