119 replies to this topic

[Chumnick]

This option it is for the energetic saving, and increases or it raises the multiplier of the cpu

I understand why these options, but the question is: why these settings?
Thank you!

[magnifico]

You have a 2600K ?
Your cpu of default is 34x
If setting 35x 36x 37x 38x ..you active turbo step..ok?????

[Chumnick]

You have a 2600K ? Your cpu of default is 34x If setting 35x 36x 37x 38x ..you active turbo step..ok?????

Thanks for answer!!! ok?????

[buoo]

Hi Chumnick

The base frequency of our i7-2600K is 1.6 GHz and the highest normal (non-turbo) frequency is 3.4 GHz. 38,37,36,35 are the turbo frequencies for core (i.e. 38 = 3800Mhz). If you wish you can use different limits, for example if you wanna overclock your CPU you can increase the values.

[magnifico]

Hi Buoo
Please ..for istat menus software i need a different kext?
Thanks

[BigSmokie]

Hi, I'm using the Asus P8Z68 Deluxe Gen3, and wanted to know where I could get a DSDT or if I could use the same Bios patch that you're using.? I found this website http://bios4asus.blogspot.in/ which allows me to download a patched Bios for the Asus P8Z68 Deluxe Gen3, but I dont know if I need an SSDT or DSDT? Infact, to be honest I don't know the difference between SSDT and DSDT..

Thanks for all help..

[Chumnick]

Hi Buoo,
you have already tried the new version of the BIOS_3202 with the patch? it makes sense to upgrade? Thanks.

[davidm71]

Buoo,

Have you patched your 3203 bios yet? I just successfuly did just that, but i now need a new dsdt though i was told by dhp girl that all i need is a tiny ssdt with chameleon. So was wondering if there is a guise on how to make one?

thanks.

[buoo]

I didn't do it yet, lately I'm a bit busy. The nuclear fissing is capturing all my time.

@ davidm71

It works great! Take it http://www.insanelym...dpost&p=1806913

[magnifico]

Maybe revogirl have a solution for this

[magnifico]

hi buoo
Please..why in my kern log have this message ?

AppleIntelCPUPowerManagement: Turbo Ratios EEEE

This is a normal?

[buoo]

I think so, you are using different core ratio limits.

[magnifico]

I think so, you are using different core ratio limits.

Hi Buoo .... i use only 49 49 49 49 turbo ratio and not 46 47 48 49

[buoo]

What's the problem? ..What do you want me to say?

[magnifico]

I would not have to be numbers I read alone letters or not?

[Chumnick]

Hi Buoo, can you help me?
In ML DP3, I have a problem with the P-State Stepper Error 18 at step 2, but I can not edit ssdt to solve this problem. I use my dsdt and your ssdt of the following topic: http://www.insanelym...c=253642&st=760!
You can edit this ssdt to solve this problem? Thank you very much! Sorry for my English.

Attached Files

•  dsdt.aml.zip   15.58KB   4 downloads
•  ssdt_new3.zip   1.51KB   3 downloads

[doof]

hi buoo
Please..why in my kern log have this message ?

AppleIntelCPUPowerManagement: Turbo Ratios EEEE

This is a normal?

CPUPM Turbo ratios are in hex, base multipler + offset, 10=A,11=B,12=C etc so E = 14. If your base ratio is 35 then all your turbo ratios are set to 49 EEEE.

[magnifico]

CPUPM Turbo ratios are in hex, base multipler + offset, 10=A,11=B,12=C etc so E = 14. If your base ratio is 35 then all your turbo ratios are set to 49 EEEE.

Thanks...friend thanks

[buoo]

Update May 13, 2012
3203 patched BIOS
SSDT for the new BIOS

[magnifico]

Great news friend