Jump to content

Instalação do Snow Leopard em Placas-Mãe/Notebooks Asus


MaLd0n
 Share

255 posts in this topic

Recommended Posts

estes sao os kexts k tenho:

 

/Extra/Extensions

ahciportinjector

fakesmc

ioahciblockstorageinjector

ad1988bfix

jmicron36xata

jmicron36xsata

voodoosdhc

 

/S/L/E/

applehda

skge

ionetworkingfamily

 

e continuo sem sem. :S

Link to comment
Share on other sites

ahciportinjector

fakesmc

ioahciblockstorageinjector

ad1988bfix

jmicron36xata

jmicron36xsata

voodoosdhc

 

/S/L/E/

applehda

skge

ionetworkingfamily

 

e continuo sem sem. :S

ahciportinjector - essa sua placa tem AHCI?

fakesmc - kext obrigatoria

ioahciblockstorageinjector-resolve o problema HD interno com ícones "laranja"

jmicron36xata e jmicron36xsata - a controladora é JMICRON?

 

em s/l/e tem mais de 200 kexts

 

use um HD de teste e não modifique nada, faça o procedimento citado no tópico, use o DSDT + a Legacy ad1988bfix

esse audio tem de funcionar dessa forma

 

pra Mavell Yukon 88E8056 use a legacy Tb

LegacyAppleYukon2.kext.zip

Link to comment
Share on other sites

Faça um dump do codec de áudio no Linux (pode usar um live CD)

cat /proc/asound/card0/codec#0 > codec.txt

Dependendo da revisão a kext AD1988bFix pode não funcionar sem ajustes.

 

Codec: Analog Devices AD1988B
Address: 0
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x11d4198b
Subsystem Id: 0x104381f6
Revision Id: 0x100200
No Modem Function Group found
Default PCM:
rates [0x7ff]: 8000 11025 16000 22050 32000 44100 48000 88200 96000 176400 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Default Amp-Out caps: ofs=0x27, nsteps=0x27, stepsize=0x05, mute=0
GPIO: io=2, o=0, i=0, unsolicited=1, wake=0
 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=1, unsol=0
Node 0x02 [Audio Output] wcaps 0x30311: Stereo Digital
 Control: name="IEC958 Playback Con Mask", index=0, device=0
 Control: name="IEC958 Playback Pro Mask", index=0, device=0
 Control: name="IEC958 Playback Default", index=0, device=0
 Control: name="IEC958 Playback Switch", index=0, device=0
 Control: name="IEC958 Default PCM Playback Switch", index=0, device=0
 Control: name="IEC958 Playback Source", index=0, device=0
 Device: name="AD198x Digital", type="SPDIF", device=1
 Converter: stream=0, channel=0
 Digital: Enabled
 Digital category: 0x0
 PCM:
rates [0x7e0]: 44100 48000 88200 96000 176400 192000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
 Delay: 3 samples
 Connection: 1
 0x1d
Node 0x03 [Audio Output] wcaps 0x405: Stereo Amp-Out
 Amp-Out caps: ofs=0x27, nsteps=0x27, stepsize=0x05, mute=0
 Amp-Out vals:  [0x27 0x27]
 Converter: stream=0, channel=0
 Power states:  D0 D3
 Power: setting=D0, actual=D0
Node 0x04 [Audio Output] wcaps 0x405: Stereo Amp-Out
 Control: name="Front Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
 Device: name="AD198x Analog", type="Audio", device=0
 Amp-Out caps: ofs=0x27, nsteps=0x27, stepsize=0x05, mute=0
 Amp-Out vals:  [0x19 0x19]
 Converter: stream=0, channel=0
 Power states:  D0 D3
 Power: setting=D0, actual=D0
Node 0x05 [Audio Output] wcaps 0x405: Stereo Amp-Out
 Control: name="Center Playback Volume", index=0, device=0
ControlAmp: chs=1, dir=Out, idx=0, ofs=0
 Control: name="LFE Playback Volume", index=0, device=0
ControlAmp: chs=2, dir=Out, idx=0, ofs=0
 Amp-Out caps: ofs=0x27, nsteps=0x27, stepsize=0x05, mute=0
 Amp-Out vals:  [0x00 0x00]
 Converter: stream=0, channel=0
 Power states:  D0 D3
 Power: setting=D0, actual=D0
Node 0x06 [Audio Output] wcaps 0x405: Stereo Amp-Out
 Control: name="Surround Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
 Amp-Out caps: ofs=0x27, nsteps=0x27, stepsize=0x05, mute=0
 Amp-Out vals:  [0x00 0x00]
 Converter: stream=0, channel=0
 Power states:  D0 D3
 Power: setting=D0, actual=D0
Node 0x07 [Audio Input] wcaps 0x130391: Stereo Digital
 Control: name="IEC958 Capture Switch", index=0, device=0
 Control: name="IEC958 Capture Default", index=0, device=0
 Device: name="AD198x Digital", type="SPDIF", device=1
 Converter: stream=0, channel=0
 SDI-Select: 0
 Digital: Validity
 Digital category: 0x0
 PCM:
rates [0x7e0]: 44100 48000 88200 96000 176400 192000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
 Unsolicited: tag=00, enabled=0
 Delay: 3 samples
 Connection: 1
 0x1c
Node 0x08 [Audio Input] wcaps 0x100501: Stereo
 Device: name="AD198x Analog", type="Audio", device=0
 Converter: stream=0, channel=0
 SDI-Select: 0
 Power states:  D0 D3
 Power: setting=D0, actual=D0
 Connection: 1
 0x0c
Node 0x09 [Audio Input] wcaps 0x100501: Stereo
 Converter: stream=0, channel=0
 SDI-Select: 0
 Power states:  D0 D3
 Power: setting=D0, actual=D0
 Connection: 1
 0x0d
Node 0x0a [Audio Output] wcaps 0x405: Stereo Amp-Out
 Control: name="Side Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
 Amp-Out caps: ofs=0x27, nsteps=0x27, stepsize=0x05, mute=0
 Amp-Out vals:  [0x00 0x00]
 Converter: stream=0, channel=0
 Power states:  D0 D3
 Power: setting=D0, actual=D0
Node 0x0b [Audio Selector] wcaps 0x300301: Stereo Digital
 Connection: 3
 0x08* 0x09 0x0f
Node 0x0c [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
 Control: name="Capture Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
 Control: name="Capture Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
 Control: name="Input Source", index=0, device=0
 Amp-Out caps: ofs=0x27, nsteps=0x36, stepsize=0x05, mute=1
 Amp-Out vals:  [0x2f 0x2f]
 Connection: 10
 0x38 0x39* 0x3a 0x3b 0x3c 0x18 0x24 0x25 0x3d 0x20
Node 0x0d [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
 Control: name="Capture Volume", index=1, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
 Control: name="Capture Switch", index=1, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
 Control: name="Input Source", index=1, device=0
 Amp-Out caps: ofs=0x27, nsteps=0x36, stepsize=0x05, mute=1
 Amp-Out vals:  [0xa7 0xa7]
 Connection: 10
 0x38 0x39* 0x3a 0x3b 0x3c 0x18 0x24 0x25 0x3d 0x20
Node 0x0e [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
 Control: name="Capture Volume", index=2, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
 Control: name="Capture Switch", index=2, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
 Control: name="Input Source", index=2, device=0
 Amp-Out caps: ofs=0x27, nsteps=0x36, stepsize=0x05, mute=1
 Amp-Out vals:  [0xa7 0xa7]
 Connection: 10
 0x38 0x39* 0x3a 0x3b 0x3c 0x18 0x24 0x25 0x3d 0x20
Node 0x0f [Audio Input] wcaps 0x100501: Stereo
 Converter: stream=0, channel=0
 SDI-Select: 0
 Power states:  D0 D3
 Power: setting=D0, actual=D0
 Connection: 1
 0x0e
Node 0x10 [beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
 Control: name="Beep Playback Volume", index=0, device=0
ControlAmp: chs=1, dir=Out, idx=0, ofs=0
 Control: name="Beep Playback Switch", index=0, device=0
ControlAmp: chs=1, dir=Out, idx=0, ofs=0
 Amp-Out caps: ofs=0x0f, nsteps=0x0f, stepsize=0x0b, mute=1
 Amp-Out vals:  [0x00]
Node 0x11 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
 Amp-Out vals:  [0x00 0x00]
 Pincap 0x0000373f: IN OUT HP Detect Trigger ImpSense
Vref caps: HIZ 50 GRD 80 100
 Pin Default 0x02214030: [Jack] HP Out at Ext Front
Conn = 1/8, Color = Green
DefAssociation = 0x3, Sequence = 0x0
 Pin-ctls: 0xc0: OUT HP VREF_HIZ
 Unsolicited: tag=00, enabled=0
 Connection: 1
 0x22
Node 0x12 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
 Amp-Out vals:  [0x00 0x00]
 Pincap 0x0001373f: IN OUT HP EAPD Detect Trigger ImpSense
Vref caps: HIZ 50 GRD 80 100
 EAPD 0x0:
 Pin Default 0x01014010: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Green
DefAssociation = 0x1, Sequence = 0x0
 Pin-ctls: 0x40: OUT VREF_HIZ
 Unsolicited: tag=00, enabled=0
 Connection: 1
 0x29
Node 0x13 [Pin Complex] wcaps 0x40010c: Mono Amp-Out
 Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
 Amp-Out vals:  [0x00]
 Pincap 0x00000010: OUT
 Pin Default 0x511711f0: [N/A] Speaker at Int Rear
Conn = Analog, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
 Pin-ctls: 0x40: OUT
 Connection: 1
 0x2d
Node 0x14 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
 Amp-Out vals:  [0x80 0x80]
 Pincap 0x0000373f: IN OUT HP Detect Trigger ImpSense
Vref caps: HIZ 50 GRD 80 100
 Pin Default 0x02a19022: [Jack] Mic at Ext Front
Conn = 1/8, Color = Pink
DefAssociation = 0x2, Sequence = 0x2
 Pin-ctls: 0x24: IN VREF_80
 Unsolicited: tag=00, enabled=0
 Connection: 1
 0x2b
Node 0x15 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
 Amp-Out vals:  [0x80 0x80]
 Pincap 0x00013737: IN OUT EAPD Detect Trigger ImpSense
Vref caps: HIZ 50 GRD 80 100
 EAPD 0x0:
 Pin Default 0x01813021: [Jack] Line In at Ext Rear
Conn = 1/8, Color = Blue
DefAssociation = 0x2, Sequence = 0x1
 Pin-ctls: 0x20: IN VREF_HIZ
 Unsolicited: tag=00, enabled=0
 Connection: 1
 0x2c
Node 0x16 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
 Amp-Out vals:  [0x00 0x00]
 Pincap 0x00003737: IN OUT Detect Trigger ImpSense
Vref caps: HIZ 50 GRD 80 100
 Pin Default 0x01011012: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0x1, Sequence = 0x2
 Pin-ctls: 0x40: OUT VREF_HIZ
 Unsolicited: tag=00, enabled=0
 Connection: 1
 0x2a
Node 0x17 [Pin Complex] wcaps 0x40098d: Stereo Amp-Out R/L
 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
 Amp-Out vals:  [0x80 0x80]
 Pincap 0x00003737: IN OUT Detect Trigger ImpSense
Vref caps: HIZ 50 GRD 80 100
 Pin Default 0x01a19020: [Jack] Mic at Ext Rear
Conn = 1/8, Color = Pink
DefAssociation = 0x2, Sequence = 0x0
 Pin-ctls: 0x24: IN VREF_80
 Unsolicited: tag=00, enabled=0
 Connection: 1
 0x26
Node 0x18 [Pin Complex] wcaps 0x400001: Stereo
 Pincap 0x00000020: IN
 Pin Default 0x9933112e: [Fixed] CD at Int ATAPI
Conn = ATAPI, Color = Black
DefAssociation = 0x2, Sequence = 0xe
Misc = NO_PRESENCE
 Pin-ctls: 0x20: IN
Node 0x19 [Power Widget] wcaps 0x500500: Mono
 Power states:  D0 D3
 Power: setting=D0, actual=D0
 Connection: 2
 0x20 0x21
Node 0x1a [Pin Complex] wcaps 0x400000: Mono
 Pincap 0x00000020: IN
 Pin Default 0x918711f0: [Fixed] Line In at Int Rear
Conn = Analog, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
 Pin-ctls: 0x20: IN
Node 0x1b [Pin Complex] wcaps 0x40030d: Stereo Digital Amp-Out
 Control: name="IEC958 Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
 Control: name="IEC958 Playback Source", index=0, device=0
 Amp-Out caps: ofs=0x27, nsteps=0x27, stepsize=0x05, mute=1
 Amp-Out vals:  [0x19 0x19]
 Pincap 0x00000010: OUT
 Pin Default 0x0145f1f0: [Jack] SPDIF Out at Ext Rear
Conn = Optical, Color = Other
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
 Pin-ctls: 0x40: OUT
 Connection: 1
 0x02
Node 0x1c [Pin Complex] wcaps 0x40020b: Stereo Digital Amp-In
 Control: name="IEC958 Capture Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
 Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
 Amp-In vals:  [0x00 0x00]
 Pincap 0x00000020: IN
 Pin Default 0x41c5f1f0: [N/A] SPDIF In at Ext Rear
Conn = Optical, Color = Other
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
 Pin-ctls: 0x20: IN
Node 0x1d [Audio Mixer] wcaps 0x200303: Stereo Digital Amp-In
 Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
 Amp-In vals:  [0x00 0x00] [0x80 0x80]
 Connection: 2
 0x01 0x0b
Node 0x1e [Audio Mixer] wcaps 0x200103: Stereo Amp-In
 Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
 Amp-In vals:  [0x00 0x00] [0x00 0x00]
 Connection: 2
 0x36 0x21
Node 0x1f [Volume Knob Widget] wcaps 0x600080: Mono
 Volume-Knob: delta=1, steps=63, direct=0, val=0
 Unsolicited: tag=00, enabled=0
 Connection: 0
Node 0x20 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
 Control: name="CD Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=6, ofs=0
 Control: name="CD Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=6, ofs=0
 Control: name="Front Mic Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
 Control: name="Front Mic Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
 Control: name="Line Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=1, ofs=0
 Control: name="Line Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=1, ofs=0
 Control: name="Mic Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=4, ofs=0
 Control: name="Mic Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=4, ofs=0
 Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
 Amp-In vals:  [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
 Connection: 8
 0x39 0x33 0x38 0x3d 0x34 0x3b 0x18 0x1a
Node 0x21 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
 Control: name="Analog Mix Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
 Control: name="Analog Mix Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
 Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
 Amp-Out vals:  [0x1f 0x1f]
 Connection: 1
 0x20
Node 0x22 [Audio Mixer] wcaps 0x200103: Stereo Amp-In
 Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
 Amp-In vals:  [0x00 0x00] [0x00 0x00]
 Connection: 2
 0x37 0x21
Node 0x23 [Vendor Defined Widget] wcaps 0xf00100: Mono
 Connection: 18
 0x11* 0x12 0x13 0x14 0x15 0x16 0x17 0x18 0x24 0x25 0x38 0x39 0x3a 0x3b 0x3c 0x3d 0x20 0x21
Node 0x24 [Pin Complex] wcaps 0x40098d: Stereo Amp-Out R/L
 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
 Amp-Out vals:  [0x00 0x00]
 Pincap 0x00000037: IN OUT Detect Trigger ImpSense
 Pin Default 0x01016011: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Orange
DefAssociation = 0x1, Sequence = 0x1
 Pin-ctls: 0x40: OUT
 Unsolicited: tag=00, enabled=0
 Connection: 1
 0x27
Node 0x25 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
 Amp-Out vals:  [0x00 0x00]
 Pincap 0x00000037: IN OUT Detect Trigger ImpSense
 Pin Default 0x01012013: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Grey
DefAssociation = 0x1, Sequence = 0x3
 Pin-ctls: 0x40: OUT
 Unsolicited: tag=00, enabled=0
 Connection: 1
 0x28
Node 0x26 [Audio Mixer] wcaps 0x200103: Stereo Amp-In
 Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
 Amp-In vals:  [0x80 0x80] [0x80 0x80]
 Connection: 2
 0x32 0x21
Node 0x27 [Audio Mixer] wcaps 0x200103: Stereo Amp-In
 Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
 Amp-In vals:  [0x80 0x80] [0x80 0x80]
 Connection: 2
 0x05 0x21
Node 0x28 [Audio Mixer] wcaps 0x200103: Stereo Amp-In
 Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
 Amp-In vals:  [0x80 0x80] [0x80 0x80]
 Connection: 2
 0x0a 0x21
Node 0x29 [Audio Mixer] wcaps 0x200103: Stereo Amp-In
 Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
 Amp-In vals:  [0x00 0x00] [0x00 0x00]
 Connection: 2
 0x04 0x21
Node 0x2a [Audio Mixer] wcaps 0x200103: Stereo Amp-In
 Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
 Amp-In vals:  [0x80 0x80] [0x80 0x80]
 Connection: 2
 0x06 0x21
Node 0x2b [Audio Mixer] wcaps 0x200103: Stereo Amp-In
 Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
 Amp-In vals:  [0x80 0x80] [0x80 0x80]
 Connection: 2
 0x30 0x21
Node 0x2c [Audio Mixer] wcaps 0x200103: Stereo Amp-In
 Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
 Amp-In vals:  [0x80 0x80] [0x80 0x80]
 Connection: 2
 0x31 0x21
Node 0x2d [Audio Mixer] wcaps 0x200100: Mono
 Connection: 1
 0x1e
Node 0x2e [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x2f [Vendor Defined Widget] wcaps 0xf00100: Mono
 Connection: 6
 0x11* 0x12 0x14 0x15 0x16 0x17
Node 0x30 [Audio Selector] wcaps 0x300101: Stereo
 Connection: 3
 0x03* 0x04 0x06
Node 0x31 [Audio Selector] wcaps 0x300101: Stereo
 Connection: 2
 0x04* 0x0a
Node 0x32 [Audio Selector] wcaps 0x300101: Stereo
 Connection: 2
 0x05* 0x04
Node 0x33 [Audio Selector] wcaps 0x300101: Stereo
 Connection: 3
 0x3a* 0x25 0x24
Node 0x34 [Audio Selector] wcaps 0x300101: Stereo
 Connection: 3
 0x3c* 0x25 0x24
Node 0x35 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x36 [Audio Selector] wcaps 0x300101: Stereo
 Connection: 3
 0x03 0x04* 0x06
Node 0x37 [Audio Selector] wcaps 0x300101: Stereo
 Connection: 3
 0x03 0x04* 0x06
Node 0x38 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
 Amp-Out caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
 Amp-Out vals:  [0x00 0x00]
 Connection: 1
 0x11
Node 0x39 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
 Control: name="Front Mic Boost Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
 Amp-Out caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
 Amp-Out vals:  [0x00 0x00]
 Connection: 1
 0x14
Node 0x3a [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
 Amp-Out caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
 Amp-Out vals:  [0x00 0x00]
 Connection: 1
 0x15
Node 0x3b [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
 Amp-Out caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
 Amp-Out vals:  [0x00 0x00]
 Connection: 1
 0x16
Node 0x3c [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
 Control: name="Mic Boost Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
 Amp-Out caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
 Amp-Out vals:  [0x00 0x00]
 Connection: 1
 0x17
Node 0x3d [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
 Amp-Out caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
 Amp-Out vals:  [0x00 0x00]
 Connection: 1
 0x12

Link to comment
Share on other sites

Aquela AD1988bFix como está não vai servir, precisa de alguns ajustes.

 

Ela é para a revisão 0x100300 do codec

Verbs from Linux Codec Dump File: 0x100300.txt

Codec: Analog Devices AD1988B   Address: 0   DevID: 299112843 (0x11d4198b)

  Jack   Color  Description                  Node     PinDefault             Original Verbs
--------------------------------------------------------------------------------------------------------
   1/8   Green  HP Out at Ext Front         17 0x11   0x02214030   01171c30 01171d40 01171e21 01171f02
   1/8   Green  Line Out at Ext Rear        18 0x12   0x01014010   01271c10 01271d40 01271e01 01271f01
Analog   Black  Speaker at Int Rear         19 0x13   0x511711f0   01371cf0 01371d11 01371e17 01371f51
   1/8    Pink  Mic at Ext Front            20 0x14   0x02a1902e   01471c2e 01471d90 01471ea1 01471f02
   1/8    Blue  Line In at Ext Rear         21 0x15   0x01813021   01571c21 01571d30 01571e81 01571f01
   1/8   Black  Line Out at Ext Rear        22 0x16   0x01011012   01671c12 01671d10 01671e01 01671f01
   1/8    Pink  Mic at Ext Rear             23 0x17   0x01a19020   01771c20 01771d90 01771ea1 01771f01
 ATAPI   Black  CD at Int ATAPI             24 0x18   0x99331122   01871c22 01871d11 01871e33 01871f99
Analog   Black  Speaker at Int Rear         26 0x1a   0x911711f0   01a71cf0 01a71d11 01a71e17 01a71f91
Optical   Other  SPDIF Out at Ext Rear       27 0x1b   0x0145f1a0   01b71ca0 01b71df1 01b71e45 01b71f01
Optical   Other  SPDIF In at Ext Rear        28 0x1c   0x41c5f160   01c71c60 01c71df1 01c71ec5 01c71f41
   1/8  Orange  Line Out at Ext Rear        36 0x24   0x01016011   02471c11 02471d60 02471e01 02471f01
   1/8    Grey  Line Out at Ext Rear        37 0x25   0x01012014   02571c14 02571d20 02571e01 02571f01
--------------------------------------------------------------------------------------------------------


  Jack   Color  Description                  Node     PinDefault             Modified Verbs
--------------------------------------------------------------------------------------------------------
   1/8   Green  HP Out at Ext Front         17 0x11   0x02214030   01171c30 01171d40 01171e21 01171f01
   1/8   Green  Line Out at Ext Rear        18 0x12   0x01014010   01271c10 01271d40 01271e01 01271f01
Analog   Black  Speaker at Int Rear         19 0x13   0x511711f0   01371cf0 01371d10 01371e17 01371f51
   1/8    Pink  Mic at Ext Front            20 0x14   0x02a1902e   01471c20 01471d90 01471ea1 01471f01
   1/8    Blue  Line In at Ext Rear         21 0x15   0x01813021   01571c40 01571d30 01571e81 01571f01
   1/8   Black  Line Out at Ext Rear        22 0x16   0x01011012   01671c50 01671d10 01671e01 01671f01
   1/8    Pink  Mic at Ext Rear             23 0x17   0x01a19020   01771c70 01771d90 01771ea1 01771f01
Analog   Black  Speaker at Int Rear         26 0x1a   0x911711f0   01a71c80 01a71d10 01a71e17 01a71f91
Optical   Other  SPDIF Out at Ext Rear       27 0x1b   0x0145f1a0   01b71ca0 01b71df0 01b71e45 01b71f01
Optical   Other  SPDIF In at Ext Rear        28 0x1c   0x41c5f160   01c71c60 01c71df0 01c71ec5 01c71f41
   1/8  Orange  Line Out at Ext Rear        36 0x24   0x01016011   02471c90 02471d60 02471e01 02471f01
   1/8    Grey  Line Out at Ext Rear        37 0x25   0x01012014   02571cb0 02571d20 02571e01 02571f01
--------------------------------------------------------------------------------------------------------

O seu é revisão 0x100200

Verbs from Linux Codec Dump File: 0x100200.txt

Codec: Analog Devices AD1988B   Address: 0   DevID: 299112843 (0x11d4198b)

  Jack   Color  Description                  Node     PinDefault             Original Verbs
--------------------------------------------------------------------------------------------------------
   1/8   Green  HP Out at Ext Front         17 0x11   0x02214030   01171c30 01171d40 01171e21 01171f02
   1/8   Green  Line Out at Ext Rear        18 0x12   0x01014010   01271c10 01271d40 01271e01 01271f01
Analog   Black  Speaker at Int Rear         19 0x13   0x511711f0   01371cf0 01371d11 01371e17 01371f51
   1/8    Pink  Mic at Ext Front            20 0x14   0x02a19022   01471c22 01471d90 01471ea1 01471f02
   1/8    Blue  Line In at Ext Rear         21 0x15   0x01813021   01571c21 01571d30 01571e81 01571f01
   1/8   Black  Line Out at Ext Rear        22 0x16   0x01011012   01671c12 01671d10 01671e01 01671f01
   1/8    Pink  Mic at Ext Rear             23 0x17   0x01a19020   01771c20 01771d90 01771ea1 01771f01
 ATAPI   Black  CD at Int ATAPI             24 0x18   0x9933112e   01871c2e 01871d11 01871e33 01871f99
Analog   Black  Line In at Int Rear         26 0x1a   0x918711f0   01a71cf0 01a71d11 01a71e87 01a71f91
Optical   Other  SPDIF Out at Ext Rear       27 0x1b   0x0145f1f0   01b71cf0 01b71df1 01b71e45 01b71f01
Optical   Other  SPDIF In at Ext Rear        28 0x1c   0x41c5f1f0   01c71cf0 01c71df1 01c71ec5 01c71f41
   1/8  Orange  Line Out at Ext Rear        36 0x24   0x01016011   02471c11 02471d60 02471e01 02471f01
   1/8    Grey  Line Out at Ext Rear        37 0x25   0x01012013   02571c13 02571d20 02571e01 02571f01
--------------------------------------------------------------------------------------------------------


  Jack   Color  Description                  Node     PinDefault             Modified Verbs
--------------------------------------------------------------------------------------------------------
   1/8   Green  HP Out at Ext Front         17 0x11   0x02214030   01171c30 01171d40 01171e21 01171f01
   1/8   Green  Line Out at Ext Rear        18 0x12   0x01014010   01271c10 01271d40 01271e01 01271f01
Analog   Black  Speaker at Int Rear         19 0x13   0x511711f0   01371cf0 01371d10 01371e17 01371f51
   1/8    Pink  Mic at Ext Front            20 0x14   0x02a19022   01471c20 01471d90 01471ea1 01471f01
   1/8    Blue  Line In at Ext Rear         21 0x15   0x01813021   01571c40 01571d30 01571e81 01571f01
   1/8   Black  Line Out at Ext Rear        22 0x16   0x01011012   01671c50 01671d10 01671e01 01671f01
   1/8    Pink  Mic at Ext Rear             23 0x17   0x01a19020   01771c60 01771d90 01771ea1 01771f01
Analog   Black  Line In at Int Rear         26 0x1a   0x918711f0   01a71c70 01a71d10 01a71e87 01a71f91
Optical   Other  SPDIF Out at Ext Rear       27 0x1b   0x0145f1f0   01b71c80 01b71df0 01b71e45 01b71f01
Optical   Other  SPDIF In at Ext Rear        28 0x1c   0x41c5f1f0   01c71c90 01c71df0 01c71ec5 01c71f41
   1/8  Orange  Line Out at Ext Rear        36 0x24   0x01016011   02471ca0 02471d60 02471e01 02471f01
   1/8    Grey  Line Out at Ext Rear        37 0x25   0x01012013   02571cb0 02571d20 02571e01 02571f01
--------------------------------------------------------------------------------------------------------

Precisa editar o Info.plist e modificar os verbs nas chaves ConfigData.

Link to comment
Share on other sites

Tenta usar "USBBusFix=yes" ou "USBLegacyOff=yes" junto com o busratio.

 

nao deu certo, continua sem detectar o mouse. Mas consegui configurar toda a instalaçao somente com o teclado, mas nao consegui termina-la acho que meu dvd esta com problema.

enfim, sera que depois de instalado vai detectar o mouse?

Link to comment
Share on other sites

nao deu certo, continua sem detectar o mouse. Mas consegui configurar toda a instalaçao somente com o teclado, mas nao consegui termina-la acho que meu dvd esta com problema.

enfim, sera que depois de instalado vai detectar o mouse?

Vc tentou nas outras "portas" USB?

Link to comment
Share on other sites

Aquela AD1988bFix como está não vai servir, precisa de alguns ajustes.

....

Precisa editar o Info.plist e modificar os verbs nas chaves ConfigData.

 

Como faço isso? Abro o o terminal e edito o ad1988bfix?

 

nano /extra/extensions/ad1988bfix.kext/Contents/Info.plist

 

e altero para os valores da minha versao, é isso?

Link to comment
Share on other sites

sim. so nao tentei nas portas frontais.

E o pior é que nem o mouse ps2 nao esta detectando.

:P

 

nao sei se é o seu caso, mas eu apra meter um rato e teclado ps2 a tabalhar usei o voodoops2.kext

Link to comment
Share on other sites

Como faço isso? Abro o o terminal e edito o ad1988bfix?

 

nano /extra/extensions/ad1988bfix.kext/Contents/Info.plist

 

e altero para os valores da minha versao, é isso?

Use o PlistEditPro. Com o nano ou qualquer editor de textos o valor da ConfigData não fica "legível".

Link to comment
Share on other sites

alterei os valores e nada. acho que vou voltar ao voodoohda, que ao menos tinha som 2,0 ;)

se for usar a Voodoo, não esqueça de remover o HDEF ou então usar a AppleHdaDisabler

Link to comment
Share on other sites

enfim consegui configurar meu OSx.....update 10.6.6

agora me deparei com o principal problema, minha placa de audio.

 

uso uma ProFire 2626 Firewire, a kext dela peguei no site da m-audio. O problema esta no driver Firewire 1394 da placa mae, ela detecta normal a Profire, abre o painel dela e tudo, mas quando coloco algum som pra tocar, somente fica piscando o led dela e para de detecta-la.

no windows eu ligava ela em uma placa Pci-firewire da Via ( VT6306), mas nao encontrei kexts pra ela.

 

 

--------

Placa mae: P7P55 M

Link to comment
Share on other sites

enfim consegui configurar meu OSx.....update 10.6.6

agora me deparei com o principal problema, minha placa de audio.

 

uso uma ProFire 2626 Firewire, a kext dela peguei no site da m-audio. O problema esta no driver Firewire 1394 da placa mae, ela detecta normal a Profire, abre o painel dela e tudo, mas quando coloco algum som pra tocar, somente fica piscando o led dela e para de detecta-la.

no windows eu ligava ela em uma placa Pci-firewire da Via ( VT6306), mas nao encontrei kexts pra ela.

 

 

--------

Placa mae: P7P55 M

 

vc usou o Auto-patcher?

isso pode ser um "probleminha" dos IRQs

Link to comment
Share on other sites

sim....usei o auto patcher, e depois instalei o combo update 10.6.6....

precisa roda-lo novamente apos o update sera?

e se usar o HDA disabler?

 

o que seriam esses IRQs?

Não, vc não precisa usar o Auto-Patcher novamente

 

tente rodando o sistema em 32, use o arch=i386, pode ser que o drive seja pra 32

 

"interrupt request"

Link to comment
Share on other sites

tente rodando o sistema em 32, use o arch=i386, pode ser que o drive seja pra 32

 

Vou tentar, mas o driver no site da m-audio dizia que era compativel com 64.....

vou esprementar em 32, até seria melhor no meu caso se rodar em 32...

 

se acaso o problema for de IRQ, como posso resolve-lo?

Link to comment
Share on other sites

Vou tentar, mas o driver no site da m-audio dizia que era compativel com 64.....

vou esprementar em 32, até seria melhor no meu caso se rodar em 32...

 

se acaso o problema for de IRQ, como posso resolve-lo?

se vc usou o Auto-Patcher eles já foram corrigidos

 

o problema deve ser o drive mesmo

 

:moil:

Link to comment
Share on other sites

deletei a kext appleHPET.kext, vi um topico dizendo que iria resolver o problema de IRQ.....

mas agora esta dando KP, e nao consigo iniciar nem com -x

 

como repar essa kext??

Não se deleta essa kext, isso foi corrigido pelo DSDT

sem HPET, sem gerenciamento de energia

se vc tem dual boot, coloque essa kext novamente na pasta s/l/e e inicie o sistema com -f -v

Link to comment
Share on other sites

 Share

×
×
  • Create New...