sysguru Posted December 24, 2009 Share Posted December 24, 2009 hi.. i have installed mac os zep. 10.5.2. rev.2 ... l'm not able to browse internet... network connection everything correct... i tried with ping with my ip address i'm getting replay.... but when i open browser not able to connect internet... same net connection was worked last week and connection working in xp boot... how to solve this.. plz... help... thanks Link to comment Share on other sites More sharing options...
booger_sniffer5000 Posted December 25, 2009 Share Posted December 25, 2009 Try changing your interface so that it uses DHCP. Also, you should post your specs because the link in your signature is broken. Link to comment Share on other sites More sharing options...
sysguru Posted December 25, 2009 Author Share Posted December 25, 2009 my sys config.... ASUS A8n Vm (Graphics Chipset board) nvidia 6100 nforce 410 lan i have installed nforcelan ... i'm able to configure Ethernet. in network. i tried ping test i'm getting replay with my ip .... but internet is not working ... last week it was' worked perfectly ... i have installed some software's .. any virus damaged any thing like that????.....mac register issue..???? automatic update issues ????... that... i have reinstalled nforcelan driver ... but no luck...but broadband works when i boot xp... my hardware id 00:00.0 RAM memory [0500]: nVidia Corporation C51 Host Bridge [10de:02f1] (rev a2) 00:00.1 RAM memory [0500]: nVidia Corporation C51 Memory Controller 0 [10de:02fa] (rev a2) 00:00.2 RAM memory [0500]: nVidia Corporation C51 Memory Controller 1 [10de:02fe] (rev a2) 00:00.3 RAM memory [0500]: nVidia Corporation C51 Memory Controller 5 [10de:02f8] (rev a2) 00:00.4 RAM memory [0500]: nVidia Corporation C51 Memory Controller 4 [10de:02f9] (rev a2) 00:00.5 RAM memory [0500]: nVidia Corporation C51 Host Bridge [10de:02ff] (rev a2) 00:00.6 RAM memory [0500]: nVidia Corporation C51 Memory Controller 3 [10de:027f] (rev a2) 00:00.7 RAM memory [0500]: nVidia Corporation C51 Memory Controller 2 [10de:027e] (rev a2) 00:02.0 PCI bridge [0604]: nVidia Corporation C51 PCI Express Bridge [10de:02fc] (rev a1) 00:03.0 PCI bridge [0604]: nVidia Corporation C51 PCI Express Bridge [10de:02fd] (rev a1) 00:04.0 PCI bridge [0604]: nVidia Corporation C51 PCI Express Bridge [10de:02fb] (rev a1) 00:05.0 VGA compatible controller [0300]: nVidia Corporation C51G [GeForce 6100] [10de:0242] (rev a2) 00:09.0 RAM memory [0500]: nVidia Corporation MCP51 Host Bridge [10de:0270] (rev a2) 00:0a.0 ISA bridge [0601]: nVidia Corporation MCP51 LPC Bridge [10de:0261] (rev a2) 00:0a.1 SMBus [0c05]: nVidia Corporation MCP51 SMBus [10de:0264] (rev a2) 00:0b.0 USB Controller [0c03]: nVidia Corporation MCP51 USB Controller [10de:026d] (rev a2) 00:0b.1 USB Controller [0c03]: nVidia Corporation MCP51 USB Controller [10de:026e] (rev a2) 00:0d.0 IDE interface [0101]: nVidia Corporation MCP51 IDE [10de:0265] (rev a1) 00:0e.0 IDE interface [0101]: nVidia Corporation MCP51 Serial ATA Controller [10de:0266] (rev a1) 00:10.0 PCI bridge [0604]: nVidia Corporation MCP51 PCI Bridge [10de:026f] (rev a2) 00:10.1 Audio device [0403]: nVidia Corporation MCP51 High Definition Audio [10de:026c] (rev a2) 00:14.0 Bridge [0680]: nVidia Corporation MCP51 Ethernet Controller [10de:0269] (rev a1) Link to comment Share on other sites More sharing options...
sysguru Posted December 25, 2009 Author Share Posted December 25, 2009 checkout my attachment picture... how to disable modem connection.... on menu bar... --------------------------------- ifconfig lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 inet 127.0.0.1 netmask 0xff000000 inet6 ::1 prefixlen 128 gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280 stf0: flags=0<> mtu 1280 en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 inet6 fe80::215:f2ff:fe01:3457%en0 prefixlen 64 scopeid 0x4 inet 192.168.1.3 netmask 0xffffff00 broadcast 192.168.1.255 ether 00:15:f2:01:34:57 media: autoselect (100baseTX <full-duplex>) status: active supported media: none autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 100baseTX <full-duplex> 100baseTX <half-duplex> ---------------------------------------------------- ping test..... Macintosh:~ selvag$ ping 192.168.1.3 PING 192.168.1.3 (192.168.1.3): 56 data bytes 64 bytes from 192.168.1.3: icmp_seq=0 ttl=64 time=0.058 ms 64 bytes from 192.168.1.3: icmp_seq=1 ttl=64 time=0.056 ms 64 bytes from 192.168.1.3: icmp_seq=2 ttl=64 time=0.055 ms 64 bytes from 192.168.1.3: icmp_seq=3 ttl=64 time=0.053 ms 64 bytes from 192.168.1.3: icmp_seq=4 ttl=64 time=0.054 ms 64 bytes from 192.168.1.3: icmp_seq=5 ttl=64 time=0.054 ms 64 bytes from 192.168.1.3: icmp_seq=6 ttl=64 time=0.051 ms ping www.google.com ping: cannot resolve www.google.com: Unknown host driver ----------------------- kextload: extension nForceLAN.kext appears to be loadable kextload: loading extension nForceLAN.kext kextload: nForceLAN.kext loaded successfully kextload: sending personalities to kernel: kextload: from extension /System/Library/Extensions/IONetworkingFamily.kext: kextload: IONetworkStack kextload: Kernel Debugging Driver kextload: from extension /System/Library/Extensions/IOPCIFamily.kext: kextload: IOPCI2PCIBridge-Name kextload: IOPCI2PCIBridge-i386 kextload: IOPCI2PCIBridge-PCI kextload: from extension /System/Library/Extensions/nForceLAN.kext: kextload: nForce LAN Driver kextload: sending 6 personalities to the kernel kextload: matching started for nForceLAN.kext Link to comment Share on other sites More sharing options...
longboatman Posted December 26, 2009 Share Posted December 26, 2009 en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 inet6 fe80::215:f2ff:fe01:3457%en0 prefixlen 64 scopeid 0x4 inet 192.168.1.3 netmask 0xffffff00 broadcast 192.168.1.255 ether 00:15:f2:01:34:57 media: autoselect (100baseTX <full-duplex>) status: active supported media: none autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 100baseTX <full-duplex> 100baseTX <half-duplex> PING 192.168.1.3 (192.168.1.3): 56 data bytes 64 bytes from 192.168.1.3: icmp_seq=0 ttl=64 time=0.058 ms 64 bytes from 192.168.1.3: icmp_seq=1 ttl=64 time=0.056 ms 64 bytes from 192.168.1.3: icmp_seq=2 ttl=64 time=0.055 ms ping www.google.com ping: cannot resolve www.google.com: Unknown host Looks like the interface is up and running locally, but not routing correctly. Either the router/gateway is not configured on the Mac or the DNS is not right, assuming it works fine on Windows. Try pinging yahoo directly (209.131.36.158) - if you get a response it is DNS at fault -> configure manually. If not, the router address (should be 192.168.1.1, based on above) in network configuration is probably wrong -> configure manually. Link to comment Share on other sites More sharing options...
sysguru Posted December 27, 2009 Author Share Posted December 27, 2009 thanks for the replay.... yesterday i reinstalled my os 10.5.2.... now everything working fine....how to update 10.5.2 to other versions.... Looks like the interface is up and running locally, but not routing correctly. Either the router/gateway is not configured on the Mac or the DNS is not right, assuming it works fine on Windows. Try pinging yahoo directly (209.131.36.158) - if you get a response it is DNS at fault -> configure manually. If not, the router address (should be 192.168.1.1, based on above) in network configuration is probably wrong -> configure manually. Link to comment Share on other sites More sharing options...
an1r0n Posted January 12, 2010 Share Posted January 12, 2010 I had simmilar problem on virtual machine and Leopard 10.5 vanilla install. Everything worked after new safari update. try it ; ) Link to comment Share on other sites More sharing options...
Recommended Posts