tessa17 Posted October 1, 2008 Share Posted October 1, 2008 This is a Repost I posted in the wrong forum so it will be easy to find. I TAKE NO CREDIT for this at all Credit to goes to empty skull over at the insanelymac community i just want to post so i can help others out who ran into the same trouble i did after updating to 10.5.5. I have a kalyway system and a iAtkos v4 system both updated to 10.5.5 and the kexts work on both systems and should work on most systems. Any way all credit goes to empty skull over at the insanelymac community. August 7, 2009 Kext are still working on 10.5.8 there is a new universal injector by netkas but for some reason i can not get it to work on my card. But it works great on my nvidia 9600gt. Maybe someone has gotten it to work for them. September 30,2008 After playing around on my hackmac i realized that that there are people out there that are still using 10.5.0 - 10.5.4 who can not update for what ever reason and so i decided to post other solutions that may help and make this forum almost a one stop shop for x1600 for now. Here are some solutions that have worked for me in the past that could help out on 10.5.1 -10.5.5. Here are some solutions: 1. A very nice person named dionysosss gave me some kext using a method posted at this forum http://forum.insanelymac.com/index.php?sho...mp;#entry678401 beware it does not work on kalyway 10.5.3 combo update i had to use Jas 10.5.3 combo update to continue to use dionysosss kext some other method will work if you use kalyway combo update. 2. i used this kext fixed that worked also at this forum http://forum.insanelymac.com/index.php?sho...0.5.2+fix+x1600 3. I downloaded ideneb v1.1 and extracted the kext i need and it worked for 10.5.4 4. For 10.5.5 i used kext made by empty skull over at insanelymac community. that works perfect on my system after 2 weeks of searching. (this was god sent). And they have other kexts there also for other devices too. Link at the bottom. Do not use the natit kext use all kext pertaining to your card including the atinject and use the Extensions Repair App to repair permissions. Done. Also check out this site http://forum.insanelymac.com/index.php?showtopic=128176 Recap on what to use ATIRadeon.kext ATIRadeonX1000.kext ATIRadeonX1000GLDriver.bundle ATIRadeonX1000VADriver.bundle ATIRadeonX1000GA.plugin ( this kext is for your id ) ATIinject.kext 5. There is manual method i used that worked for 10.5.4 and below one is iAkos v4 gave great direction that worked a for me(link at bottom) and this forum http://forum.insanelymac.com/index.php?sho...mp;#entry130050 and this http://forum.insanelymac.com/index.php?sho...60&hl=x1600 6. Misc http://forum.insanelymac.com/index.php?sho...68&hl=x1600 and here http://forum.insanelymac.com/index.php?sho...mp;#entry508765 Everyone, this may seem like over kill but for Noobs like me who could not get their cards to work who have search high and low this will help and should make life easier.I am not a mac pro tech so all credits goes to those mentioned above I just wanted to post solutions that helped me any maybe able to help you. Remember the atiject.kext.txt is just for thoes who want to do it manually on 10.5.4 and below!! LInk for kexts http://www.mediafire.com/download.php?dnhh2jzmdnz May 31, 2009 update It appears that these kext still work for 10.5.7. I have used it on my retail installs and my Kalyway. It seems that the link for some the kexts are dead so until i can upload the files to rapidshare just pm me with email address so that i can send it to you. Here is something else i found interesting that my help others with this card found below by Barry Chung http://www.insanelymac.com/forum/index.php...p;#entry1005883 Quoted: After hours of fooling around with all kinds of drivers I found on the web for x1600 pro, I got 10.5.6 with QE & CI even GL working. What I got: I installed Kalyway 10.5.2 + Official 10.5.6 combo update (directly update from 10.5.2 ->10.5.6) on GUID partition. ASUS ATI x1600 pro 512Mb PCIe (71c2 1002) with one VGA one DVI ASUS Rampage Formula + QX9450 + 4Gb ram What you need: 1. UInstaller_1.2 2. OSX86Tools That's it! No need for any other 3rd party driver!!! What I have done: 1. remove all ATI* including ATIinjection. 2. install the official 10.5.6 combo update downloaded from Apple web site. 3. After the update finnished, DO NOT restart yet, run UInstaller and check everything except setting the Graphic EFI string. 4. Run OSX86Tools and enable the GL. 5. reboot (you meight experience once or twice auto reboot with a blank screen, leave it and let it reboot by itself.) I got a fully working system with vanilla kernel, fast and stable than ever! End of quote ATinject_kext.txt ATIinject.kext.rar Extensions_Repair.app.rar atinject.zip Link to comment Share on other sites More sharing options...
empty skull Posted October 2, 2008 Share Posted October 2, 2008 thanks tassa17 !!! put kext , not olny text file ! i'm am here too !! Link to comment Share on other sites More sharing options...
tessa17 Posted October 2, 2008 Author Share Posted October 2, 2008 ok cool did not want to post kext from someone else work out of respect for the author Link to comment Share on other sites More sharing options...
Valdrone Posted October 5, 2008 Share Posted October 5, 2008 D: I can't get the ATIInject.kext to unzip. Link to comment Share on other sites More sharing options...
tessa17 Posted October 5, 2008 Author Share Posted October 5, 2008 D: I can't get the ATIInject.kext to unzip. ok i will check it and reupload if needed just downloaded and tried it, i had not trouble . make sure you have winrar installed to open the file if you use windows I will create a zip file. Link to comment Share on other sites More sharing options...
000hhh Posted October 6, 2008 Share Posted October 6, 2008 This is a Repost I posted in the wrong forum so it will be easy to find. I TAKE NO CREDIT for this at all Credit to goes to empty skull over at the insanelymac community i just want to post so i can help others out who ran into the same trouble i did after updating to 10.5.5. I have a kalyway system and a iAtkos v4 system both updated to 10.5.5 and the kexts work on both systems and should work on most systems. Any way all credit goes to empty skull over at the insanelymac community. September 30,2008 After playing around on my hackmac i realized that that there are people out there that are still using 10.5.0 - 10.5.4 who can not update for what ever reason and so i decided to post other solutions that may help and make this forum almost a one stop shop for x1600 for now. Here are some solutions that have worked for me in the past that could help out on 10.5.1 -10.5.5. Here are some solutions: 1. A very nice person named dionysosss gave me some kext using a method posted at this forum http://forum.insanelymac.com/index.php?sho...mp;#entry678401 beware it does not work on kalyway 10.5.3 combo update i had to use Jas 10.5.3 combo update to continue to use dionysosss kext some other method will work if you use kalyway combo update. 2. i used this kext fixed that worked also at this forum http://forum.insanelymac.com/index.php?sho...0.5.2+fix+x1600 3. i downloaded ideneb v1.1 and extracted the kext i need and it worked for 10.5.4 4. for 10.5.5 i used kext made by empty skull over at insanelymac community. that works perfect on my system after 2 weeks of searching. (this was god sent). And they have other kexts there also for other devices too. Link at the bottom. Do not use the natit kext use all kext pertaining to your card including the atinject and use the Extentions Repair App to repair permissions. Done. Also check out this site http://forum.insanelymac.com/index.php?showtopic=128176 Recap on what to use ATIRadeon.kext ATIRadeonX1000.kext ATIRadeonX1000GLDriver.bundle ATIRadeonX1000VADriver.bundle ATIRadeonX1000GA.plugin ( this kext is for your id ) ATIinject.kext 5. There is manual method i used that worked for 10.5.4 and below one is iAkos v4 gave great direction that worked a for me(link at bottom) and this forum http://forum.insanelymac.com/index.php?sho...mp;#entry130050 and this http://forum.insanelymac.com/index.php?sho...60&hl=x1600 and here http://forum.insanelymac.com/index.php?sho...mp;#entry508765 6. Misc http://forum.insanelymac.com/index.php?sho...68&hl=x1600 Everyone, this may seem like over kill but for a noobs like me who could not get their cards to work who have search high and low this will help and should make life easier. LInk for kexts http://www.mediafire.com/download.php?dnhh2jzmdnz I don't know what I'm doing wrong... I'm running leopard 10.5.5 (boot-123 method with retail dvd + upgrade) after installing the kexts I can get QE/CI but no change resolution and it shows some artifacts on the pointer. The case is I tried first macloving installer (it works like a charm on 10.5.2) which gives me change resolution and no artifacts but I can't get QE/CI enabled. Any suggestion? Core2Duo 2.13 Ghz Ati X1600 PRO (71c2) Link to comment Share on other sites More sharing options...
tessa17 Posted October 6, 2008 Author Share Posted October 6, 2008 I don't know what I'm doing wrong... I'm running leopard 10.5.5 (boot-123 method with retail dvd + upgrade) after installing the kexts I can get QE/CI but no change resolution and it shows some artifacts on the pointer. The case is I tried first macloving installer (it works like a charm on 10.5.2) which gives me change resolution and no artifacts but I can't get QE/CI enabled. Any suggestion? Core2Duo 2.13 Ghz Ati X1600 PRO (71c2) I am not sure what you did but this is what i did. I download from the mediafire link and the atiinject from above then copy them to the extentions folder.This is what you need to copy to your extentions folder ATIRadeon.kext ATIRadeonX1000.kext ATIRadeonX1000GLDriver.bundle ATIRadeonX1000VADriver.bundle ATIRadeonX1000GA.plugin ( this kext is for your id ) ATIinject.kext (not the atiinject.kext.txt this is just for thoes who want to do it manually) I had the same problem but it was because i did not have the atinject installed. Link to comment Share on other sites More sharing options...
pisoias Posted October 7, 2008 Share Posted October 7, 2008 Has someone succeeded to have Extended Display with a VGA and a DVI-VGA adapter ? If so, please help! Thanks Link to comment Share on other sites More sharing options...
000hhh Posted October 7, 2008 Share Posted October 7, 2008 I am not sure what you did but this is what i did. I download from the mediafire link and the atiinject from above then copy them to the extentions folder.This is what you need to copy to your extentions folder ATIRadeon.kext ATIRadeonX1000.kext ATIRadeonX1000GLDriver.bundle ATIRadeonX1000VADriver.bundle ATIRadeonX1000GA.plugin ( this kext is for your id ) ATIinject.kext (not the atiinject.kext.txt this is just for thoes who want to do it manually) I had the same problem but it was because i did not have the atinject installed. Thanks Dude, it was just that! the ATIinject.kext was not properly installed... Link to comment Share on other sites More sharing options...
tessa17 Posted October 8, 2008 Author Share Posted October 8, 2008 Has someone succeeded to have Extended Display with a VGA and a DVI-VGA adapter ?If so, please help! Thanks not sure how to do that but try the links above to see if that will point your in the right direction. Link to comment Share on other sites More sharing options...
iAlex94 Posted October 8, 2008 Share Posted October 8, 2008 tessa can you post your video kexts? i have a problem: when i enable quartz i have random freezes... Link to comment Share on other sites More sharing options...
tessa17 Posted October 9, 2008 Author Share Posted October 9, 2008 tessa can you post your video kexts? i have a problem: when i enable quartz i have random freezes... Not a problem, but give me till tonight I don't have access to it right now. Link to comment Share on other sites More sharing options...
iAlex94 Posted October 10, 2008 Share Posted October 10, 2008 i installed your kexts but i have ever the same problem! the final solution is change the graphic card... Link to comment Share on other sites More sharing options...
tessa17 Posted October 14, 2008 Author Share Posted October 14, 2008 i installed your kexts but i have ever the same problem! the final solution is change the graphic card... you said you always had this issue what are you using kalyway retail etc. Link to comment Share on other sites More sharing options...
TONYSUN Posted December 7, 2008 Share Posted December 7, 2008 hi tessa17,i just up to 10.5.5.my graphic card is Ati X1600 PRO (71c2),but i can't connect to http://www.mediafire.com/download.php?dnhh2jzmdnz,could you give me another link ,maybe a email(tonysunswl@gmail.com);thank you so much Link to comment Share on other sites More sharing options...
tessa17 Posted December 10, 2008 Author Share Posted December 10, 2008 hi tessa17,i just up to 10.5.5.my graphic card is Ati X1600 PRO (71c2),but i can't connect to http://www.mediafire.com/download.php?dnhh2jzmdnz,could you give me another link ,maybe a email(tonysunswl@gmail.com);thank you so much I have the files on one of my flash drive so i will send it to you over the weekend. But if i get time I will try to send it before then Link to comment Share on other sites More sharing options...
TONYSUN Posted December 12, 2008 Share Posted December 12, 2008 I have the files on one of my flash drive so i will send it to you over the weekend. But if i get time I will try to send it before then thank you so so so much!! Link to comment Share on other sites More sharing options...
Recommended Posts