PCIe Bus addressing issues in Snow Leopard...

[quinielascom]

Yes, it have the X3100 integrated graphics, and same issue too.

[aa49554271]

Gateway NV4809C isn't able to detect my network card, the lack of PCI driver.

I installed IOPCMCIAFamily.kext （put into S\L\E) .Start the computer, the system did not respond, only the mouse can be moved.Help.

[dborca]

Through the black art of reverse engineering, I present you Chun-Nan's IOPCIFamily.kext v113.

 

Source code patch + binary, tested on Snow Leopard 10.6: http://www.mediafire.com/?5vifkyljzgk

 

Have fun!

[oldnapalm]

Great work, dborca.

 

Thank you.

[Onixs]

Downloaded the patch and the source of 10.5.8. Works wonderfully on Leopard.

[quinielascom]

Through the black art of reverse engineering, I present you Chun-Nan's IOPCIFamily.kext v113.

Thanks !!! working fine 32 & 64 bits in my Acer 4320.

[quitenew]

What should i do with IOPCIFamily-113.patch ???

Sorry for a dumb newbie question but i don't know about script or programming.

[Dragon Master]

Through the black art of reverse engineering, I present you Chun-Nan's IOPCIFamily.kext v113.

Do I need to add my device id to this kext? And what is the IOPCIFamily-113.patch file for?

[Onixs]

What should i do with IOPCIFamily-113.patch ???

Its the diff to fix certain issues.

Download source code from Apple. Install Xcode, Apply the IOPCIFamily-113.patch.

 

I you dont know the included file, you're better off downloading the BIN patched from page 1

[buoo]

Hi Guys

 

I have an Aspire 5739g with an Atheros Ar8131, I'm trying to make it work.

but I have this error:

 

localhost kernel[0]: [AttansicL1eEthernet] Error: Couldn't map io regs

localhost kernel[0]: [AttansicL1eEthernet] Error: Couldn't probe adapter

 

I hace tried the patch but Snow doesn't boot

 

What could I do?

 

Thanks

[dborca]

@quitenew, @Dragon Master, @rals2007

Page 1 links back to this one. The sourcecode patch is there only for reference. You don't need it. But some guru, some day, may want to look at the sourcecode instead of spending countless hours wondering what the hell I (or more exactly Chun-nan) fixed.

@Dragon Master

There's no need to add your device id (which one, btw?) anywhere (where, btw?).

@buoo

There is a strong possibily that this hack does not work for you; you should know that, as a hackint0sher. Then again, it is very likely that there's a conflict somewhere; especially if you hacked the bejesus out of your installation. Either way, you should be more verbose if you want to be helped.

[quinielascom]

Info: the dborca´s patched IOPCIFamily.kext works fine in 10.6.4 and 10.6.5

[peach-os]

@dborca

 

your IOPCIFamily.kext works very good and gives me first time ever a working 5787 ethernet.......thanks!

but since installing it my traktor software doesn´t find the audiointerface although it´s shown in the sysprofiler

any idea ?

 

EDIT: sorry - it wasn´t the IOPCIFamiliy - everything good ! thank you so much for this extension

[BuXb]

In 10.6.x I keep on getting

IOPCCard info: Mac OS X PCMCIA Card Services 3.3.0
IOPCCard info: options: [pci] [cardbus] [pnp]
IOPCCard info: Intel ISA/PCI/CardBus PCIC probe:
IOPCCard notice: Bad bridge mapping at 0xd2100000!
IOPCCard info: no bridges found.
IOPCCardBridge::start failed

even with dborca's PCIFamily, and any other PCIFamily.kext and PCCardFamily kext (Chun-Nan etc.). Tried all possible combos to now avail.

 

In Leo I was only able to get PCMCIA by replacing AppleACPIPlatform.kext, AppleAPIC.kext and IOACPIFamily.kext with the ones from 10.5.5 (or modded ones, I am not sure). Kernel Panic if I apply those in Snow. For Snow there are no modded versions of these kexts from what I know. The ones from kexts.com which claim compatibility with Snow also --> kp --

 

Also tried all sorts of Chameleon bootloaders hoping one would fix the PCI bridge mapping.

 

If anybody has ideas or even better, solutions, please post.

 

Thanks,

Bugs

[f4nch]

Is there something special to do besides copying the .kext in S/L/E and repairing the permissions ?

I installed it that way and it gave me a kernel panic, even in safe boot mode !

 

I'm using iatkos s3v2 on an Acer Aspire 7730ZG.

 

Thanks !

[ceew]

Same system , same problem

 

I installed it into 10.6.2

and 10.6.4

 

with hazard macosx

 

I also have a Acer 7730ZG

with t3400 CPU

nvidia 9300m

1684 broadcom xtreme Ethernet

 

14e4;Broadcom Corporation;1684;NetXtreme BCM5764M Gigabit Ethernet PCIe

 

swapped WiFi for genuine mac bcm4321 n card

 

14e4;Broadcom Corporation;4328;BCM4321 802.11a/b/g/n

still doesn't work

 

Using chameleon rc4

elliot force legacy rtc

legacy achi sata fix

smbios resolver

graphics enabler

voodoo hda

ioata family sata fix

 

I have tried many options for my laptop

Any Ideas

 

Please

[vashwood]

Through the black art of reverse engineering, I present you Chun-Nan's IOPCIFamily.kext v113.

Quick question. How do I know if this is really working on my Snow Leopard 64? I'm trying to narrow down my ethernet problem to my PCI driver or ethernet card (BCM57780 14e4:1692) driver.

 

kextstat shows that IOPCIFamily.kext is running. I dont think I see any errors in my console. Are there any I should specifically look for?

[quinielascom]

Info: the dborca´s patched IOPCIFamily.kext works fine in 10.6.4 and 10.6.5.

 

Report again here, now with 10.6.6; dborca´s patched driver working fine.

[kocoman]

I've tried this kext on a tx1000 HP laptop, (to enable ExpressCard PCIe video card), but it just "reboots" before going into the GUI

 

It does detect the external video card, but reboots,... and it does the same thing (reboots) without the card (using internal only)

 

How to debug this?

 

Linux and Win7 detects it fine.

 

Running 10.6.5

[darkuttek]

Anyone running Acer Aspire 7730G should take a look at here. Might work for other Acers too, maybe even for other laptops?

[oldnapalm]

I applied dborca's patches to IOPCIFamily-115.

 

Version 113 was working fine in 10.6.7, just to keep all kexts up to date.

 

IOPCIFamily.kext.zip

IOPCIFamily_115.diff.zip

[quinielascom]

Thanks, working fine here.

 

BTW works in 10.6.8 too, but is needed reinstall AppleACPIPlatform.kext from 10.6.7 otherwise KP.

[oldnapalm]

On Aspire 5920 the new IOPCIFamily-144 hangs at [PCI configuration begin].

 

I tried the first Oleg's patched and got KP

http://netkas.org/?p=852

 

Didn't test V2 yet, even it works we may still need the previous patches.

[LatinMcG]

ive had stop at [PCI configuration begin] turns out the Device (PCI) had _ADR had to change to _UID.

[BuXb]

ive had stop at [PCI configuration begin] turns out the Device (PCI) had _ADR had to change to _UID.

Thanks for sharing! Is that on your GA-G31M-ES2L rev:1.x, or another computer's DSDT?