rumproast789 Posted April 9, 2008 Share Posted April 9, 2008 Well, I used iATKOSv1.0 r3 and I have installed Mac Leopard 10.5.1 successfully. It is booting, but I have a few questions. Btw, I think my Graphics is working right after install? heres what it says, Chipset Model: GMA X3100 Type: Display Bus: Built-In VRAM (total): 144 MB Vendor: Intel (0x8086) Device ID: 0x2a02 Revision ID: 0x000c Displays: It just says Display connector twice underneath those, but before i went back in to check, it said i had hardware acceleration and at the bottom, someting with a Q and a E im guessing its what people refer to as QE, said supported I know my Wifi card wont work until they come out with some new drivers for it, its the Intel Wifi link 4965N I beleive. But the confusing thing is, even if i plug in a ethernet cable, I still dont have Internet connection. Not a big deal, but I am hoping to fix. Sigmatel sound is also not working, but i will work on that after internet and my next important problem. This is the most important to me, and whenever I boot, I get the apple logo, then the blue flash and black. Then I have to wait 11 minutes and 20 seconds roughly, and press space bar for it to show the screen. Now I have only done this to get the first load of the operating system and I know other people have to do it also. What my question is, can I fix this so I dont have to time it everytime to do that? Im afraid to restart because I dont want stuff happening again. Thanks for everyone who helped make this possible. Link to comment https://www.insanelymac.com/forum/topic/98423-dell-inspiron-1525-almost-everything-working/ Share on other sites More sharing options...
Recommended Posts