yearzero Posted April 2, 2008 Share Posted April 2, 2008 Hi everyone, After some screwing around, I finally got 10.5.2 rev2 (kernel 9.2.) installed on my system, but I am unable to get it to boot. First off, I had some problems with IOUSBFamily.kext. Someone said to remove the AppleIntelCPUPowerManagement.kext instead, so I tried that first but the problem persisted. Finally I removed the IOUSBFamily.kext and that problem was eliminated. The next issue I had was a "display: family specific matching fails" error (when booting with -v -f -x). I seem to have fixed this by removing NVDA*.kext Now after all this, I'm getting a "unknown SIGSEGV code 0" on boot. It seems to be happening just after the login program is started. Does anyone have any idea how I can fix this? I've tried booting in safe mode, then I get the SIGSEGV. I've tried booting normally, but it just hangs on the "Apple screen." I've tried adding the cpus=1 boot flag, but it makes no difference... My specs are: M/board: ASUS M2N-SLI Deluxe CPU: AMD X2 4400+ Video: Gigabyte 7300GT 256mb I'd really appreciate any help you can give me! Thanks Link to comment https://www.insanelymac.com/forum/topic/97037-sigsegv-on-boot-zephyroth-1052-rev2/ Share on other sites More sharing options...
yearzero Posted April 2, 2008 Author Share Posted April 2, 2008 For anyone who has this problem on similar hadrware, I fixed it by reinstalling and NOT selecting a kernel (therefore 9.0.0 is installed, I believe) Link to comment https://www.insanelymac.com/forum/topic/97037-sigsegv-on-boot-zephyroth-1052-rev2/#findComment-692938 Share on other sites More sharing options...
Recommended Posts