kwangming Posted March 11, 2008 Share Posted March 11, 2008 Hi... I'm new in here n this my 1st posting . I want to try osx86 leopard to my PC: -Core2Duo E6420 -Motherboard Intel DG33FB -Memory V-GEN 1 GB DDR800 -HDD Seagate 160GB -DVD Writer LITE-ON **I use onboard VGA** When 1st Boot DVD Leopard in my Monitor show: "Darwin /x86 boot v5.0.132 1005MB memory VESA v3.0 7MB (Intel® Q37/Q35/G33 Graphics Chip Accelerated VGA BIOS)" n I type "-v". So here's the result: npvhash=4095 PAE Enabled Darwin Kernel Version 9.0.0: Tue Oct 9 21:35:55 PDT 2007; tree:xnu-1228~1/RELEASE_I386 Standard timeslicing quantum is 10000 us vm_page_bootstrap: 247640 free pages and 14504 wired pages mig_table_max_displ = 79 Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style. ACPI CA 20060421 AppleACPICPU : ProcessorApicId=1 LocalApicId=0 Enabled AppleACPICPU : ProcessorApicId=1 LocalApicId=1 Enabled AppleACPICPU : ProcessorApicId=1 LocalApicId=130 Disabled AppleACPICPU : ProcessorApicId=1 LocalApicId=131 Disabled Loading security extention com.apple.nke.applicationfirewall Loading security extension com.apple.security.seatbelt calling mpo_policy_init for mb Seatbelt MACF policy initialized Security policy loaded: Seatbelt Policy (mb) Loading security extension com.apple.security.TMSafetyNet calling mpo_policy_init for TMSafetyNet Security policy leaded: Safety net for Time Machine (TMSafetyNet) Copyright © 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved MAC Framework successfully initializes using 5242 buffer headers and 4096 cluster IO buffer headers IOAPIC: version 0x20 Vectors 64:87 ACPI: System State [s0 S3 S4 S5] (S3) Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style. Extension "com.apple.driver.ApplePCIConfig" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style. [sorry I don't capture it ^^;] What I want to ask, why i can't install it? May be I must use VGA add-on?? Is anyone have successfully install leopard on PC with onboard VGA?? I don't know which version that DVD Leopard I Have... sorry.. T_T Thx for your attention n your help Link to comment https://www.insanelymac.com/forum/topic/92888-neeed-help-about-leopard-installation/ Share on other sites More sharing options...
DoiX Posted March 11, 2008 Share Posted March 11, 2008 press f8 then type -x good luck Link to comment https://www.insanelymac.com/forum/topic/92888-neeed-help-about-leopard-installation/#findComment-662533 Share on other sites More sharing options...
Yrthilian Posted March 11, 2008 Share Posted March 11, 2008 I am also getting the same issue just sits there i have tried all the diffrent switches -v -x -s cpus=1 still not getting anywere please help Link to comment https://www.insanelymac.com/forum/topic/92888-neeed-help-about-leopard-installation/#findComment-662544 Share on other sites More sharing options...
Yrthilian Posted March 11, 2008 Share Posted March 11, 2008 Ok did some more work and swaped out all the hardware i found the issue was with my botherboard. what on the motherboard was the problem i dont know The following may have been the cause The MB is a Intel DQ35JOE this MB has no ps2 ports It has both DVI and VGD ports the problem could have been the lack of ps2 port the video card (onboard) the bios or the Network card Thanks I am now trying the install on a DG31PR so far it has loaded to installer thanks Yrth Link to comment https://www.insanelymac.com/forum/topic/92888-neeed-help-about-leopard-installation/#findComment-662568 Share on other sites More sharing options...
kwangming Posted March 11, 2008 Author Share Posted March 11, 2008 I have tried "-x" & still not going to MAC gui installation (same as my 1st posting, only teks n a new line of "error report" T_T) I also tried "-v -x"<don't know if that correct, because i've searching on inet n some topics say "use boot: -v -x" ^^> n doesn't work Any idea?? May be my HDD must set to native mode but still same T_T Only teks.... Anyone have successfully install leopard with onboard VGA?? Thx a lot Link to comment https://www.insanelymac.com/forum/topic/92888-neeed-help-about-leopard-installation/#findComment-662573 Share on other sites More sharing options...
Yrthilian Posted March 11, 2008 Share Posted March 11, 2008 as the new MB i am using mentioned above it has onboard VGA so yes i have now finished my install very quick too and so far all is working fine Are you able to disable the network card (assumeing it is an onboard one) will update again tomorrow Link to comment https://www.insanelymac.com/forum/topic/92888-neeed-help-about-leopard-installation/#findComment-662595 Share on other sites More sharing options...
runganwt Posted March 12, 2008 Share Posted March 12, 2008 Did you try boot with -v -f ??? -f will flush you Extension.mkext Link to comment https://www.insanelymac.com/forum/topic/92888-neeed-help-about-leopard-installation/#findComment-663397 Share on other sites More sharing options...
kwangming Posted March 13, 2008 Author Share Posted March 13, 2008 sorry for loong reply I've tried disable my network card n still can boot T_T Only got more new line report: Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style. mbinit : done Security auditing service present BSM auditing present I haven't try -v -f. Soon after i posting this i'll try again I still use PS/2 connector on my keyb + mouse. May be i will try use a converter to USB I want to use dual boot (I've already install WinXP in C:). Here my spec again: CPU: Core2Duo E6420 2.13GHz Mobo: Intel DG33FB LGA775 RAM: V-GEN 1 GB DDR2 800 HDD: 1x160GB (4 Partitions with WinXP in 1st Partition,C:>) VGA: Onboard (Intel® G33 Express Chipset) Sound: Onboard (Realtek ALC888 audio codec - 6 channels) DVD-RW PATA LITE-ON 20x Sorry if I reply this thread a bit long Because I don't give up if i failed once so I try many times until I frustated n come to this forum to post my result of fail to find the answer hehehe.. ; Thx for your helping I will try harder until I give up if the only answer is "chage the Mobo" hehehe... ^^; Thx a lot Link to comment https://www.insanelymac.com/forum/topic/92888-neeed-help-about-leopard-installation/#findComment-665048 Share on other sites More sharing options...
kwangming Posted March 13, 2008 Author Share Posted March 13, 2008 Um.. sorry GoodGirl I can't open the page you reference to http://forum.insanelymac.com/index.php?showtopic=931155. It says : "Sorry, the link that brought you to this page seems to be out of date or broken." Any page that I can get it?? Thx Link to comment https://www.insanelymac.com/forum/topic/92888-neeed-help-about-leopard-installation/#findComment-665059 Share on other sites More sharing options...
KRKsystem Posted March 13, 2008 Share Posted March 13, 2008 click on the link. has really good infos Link to comment https://www.insanelymac.com/forum/topic/92888-neeed-help-about-leopard-installation/#findComment-666165 Share on other sites More sharing options...
Recommended Posts