crown_evolution Posted February 26, 2008 Share Posted February 26, 2008 Hi guys, Firstly before i get any RTFM (or Forums) in this case - I have been doing exaclty that but with no success... Not to mention at my wit's end... Current Hardware Config Asus P5KR MB Intel Q6600 2 GB 1066MHz DDR2 RAM ASUS EN8400GS 256MB DDR2 Spare 500GB Seagate (ST3500320AS) SATA 2 Liteon SATA DVD-RW PS2 KBD USB Mouse BIOS Setting AHCI - Enabled USB - Por 64/60 - Disabled CPU - Execute Disable Bit - Enabled CPU - Intel Speed Step - Disabled Advanced - Onboard Devices - Onboard 1394 - Enabled Advanced - Onboard Devices - Serial Port 1 Address - Disabled PCIPnP - PNP O/S - Yes What I have tried... 1) Kalyway 10.5.1 - Installed with no problems, Got through the B0 Problem, but never has booted 2) iAktos 1.0ir2 - Installed no problems, never booted 3) 10.5.1 Flat Image - No dice there... I have been trying more with Kalyway as it seems to be the easiest to get to the install point. Attached is the point at which the Loading of the OS Stops... Any thoughts, comments or suggestions? Thanks in Advance. Link to comment https://www.insanelymac.com/forum/topic/90245-asus-p5kr-frustrations/ Share on other sites More sharing options...
p1ksntded Posted January 29, 2009 Share Posted January 29, 2009 hello i've same mobo and post from leo 10,5,6... kalyway install on ahci mode and last stable bios from asus have you format your hdd with diskutil before install, and set mbr for partition type ? i only have usb problem (so i need some help to Link to comment https://www.insanelymac.com/forum/topic/90245-asus-p5kr-frustrations/#findComment-1060998 Share on other sites More sharing options...
Recommended Posts