IceNio Posted February 10, 2006 Share Posted February 10, 2006 okey. . i did everything here - > http://www.profit42.com/guides.php?id=1 , but i didn't burn the image on a dvd-r , but on dvd-rw , cause i thought it wont matter so much. reset after the PM setting the active part , inserting the dvd , then it came - "click enter to install osx , or f8 (i think it was f8) to see options or something like that, so i hit ENTER , the screen blinked and it came a text on it - "u should restart ur pc" - basic . . i can't write the whole text , it was on 4 or 5 languages , i think (and hope) , this problem will be from that the cd wasn't dvd-r. now i'm waiting my friend to bring me dvd-r so i can try with it. Should i try , or do something else . . cause on the tutorial it says if the installation give me the "hfs+ partition error" to change to win ,to install os selector and then reset. What's your suggestion ? leave that i burn it on a dvd-r , and the messege appeared again - "You need to restart your computer. Hold down the Power button for several seconds or press the Restart button." and under it the same on French , German and Japanese/Chinese . HELP ? Link to comment https://www.insanelymac.com/forum/topic/8857-1043-boot-problem/ Share on other sites More sharing options...
macgirl Posted February 10, 2006 Share Posted February 10, 2006 Press F8 and type -v for verbose output, and les us know which error appears when it hang. Link to comment https://www.insanelymac.com/forum/topic/8857-1043-boot-problem/#findComment-55080 Share on other sites More sharing options...
IceNio Posted February 10, 2006 Author Share Posted February 10, 2006 I don't know how to make screen , i'm writing some things ---> Security auditing service present BSM auditing present disabled From path: "uuid" Waiting for boot volume with VOID 36........blabla... Waiting on <dict . . . . . bla bla . . .> Apple16x50ACPI1: Identified Serial Port on ACPI Device = VAR1 Apple16x50UARTSync1: Detected 16550AF/C/CF FIFO=16 MaxBaud=115200 USB caused waked event (EHCI) AppleIntel PIIXPATA: ICH 7 ATA/100 (CMD . . . . .. . bla bla...) AppleIntel ICHxSATA: ICH SATA (CMD . . . . .bla bla. . . . ) panic (cpu 1 caller 00x00 bla bla...): Unresolved kernel trap (CPU 1,Type a bllbla bla bla...) ... . . stuff , stuff stuff .. . other things... ........................................................... Debugger called <panic> Backtrace, Format - Frame : .... some things . .. . . ............................ and at the botom -> Waiting for remote debugger connection. kdp_poll: no debugger device Link to comment https://www.insanelymac.com/forum/topic/8857-1043-boot-problem/#findComment-55084 Share on other sites More sharing options...
IceNio Posted February 10, 2006 Author Share Posted February 10, 2006 somebody , anybody ? help ? Link to comment https://www.insanelymac.com/forum/topic/8857-1043-boot-problem/#findComment-55092 Share on other sites More sharing options...
IceNio Posted February 11, 2006 Author Share Posted February 11, 2006 may the problem be that that AF partition is at the end of the hdd ? here is what my partition table looks like -> Link to comment https://www.insanelymac.com/forum/topic/8857-1043-boot-problem/#findComment-55219 Share on other sites More sharing options...
R. Bear Helms Posted February 11, 2006 Share Posted February 11, 2006 I'm guessing from what I see that it may be the Serial ATA (SATA) drive has something on it doesn't like... a partition it can't handle, or maybe the SATA hardware itself is not compatible. Is it possible to disable the SATA drives in your BIOS and try again? In general, the full text of the line with the word "panic" at the front is the diagnostic message people will analyze for you. You left out some details about the address that caused the fault, what CPU complained, what thread, that sort of thing. I noticed also this panic was from cpu 1. This means (usually) the 2nd core of a dual-core system. If yours is not a Pentium Core Duo, try again with the Hyperthreading feature disabled in the BIOS. Link to comment https://www.insanelymac.com/forum/topic/8857-1043-boot-problem/#findComment-55240 Share on other sites More sharing options...
IceNio Posted February 11, 2006 Author Share Posted February 11, 2006 I don't know if it's possible to disable the SATA drives in my BIOS , but if i do this, i'll have to connect my hdd with the normal cable (don't know the name ide i think) , and it will be kind of slow. , my cpu is not with 2cores it's p4 630 like yours i think. any other suggestions ? if it can be from the sata i can try , but i'm not very familiar with these things. Link to comment https://www.insanelymac.com/forum/topic/8857-1043-boot-problem/#findComment-55477 Share on other sites More sharing options...
R. Bear Helms Posted February 11, 2006 Share Posted February 11, 2006 Yes, mine has the same CPU, but different motherboard. I disabled SATA on my motherboard and have just 1 IDE hard disk (partitioned into NTFS and OS X), and as a slave on that same IDE chain, the DVD-RW drive, which is what I boot the install DVD from. If this panic definitely is from CPU 1, since it counts from 0, it must be that hyperthreading is not working well. Disable the hyperthreading (HT) feature in the BIOS first, then worry about the SATA later. I know there are some issues with nVidia and OS X, but I don't know what people do about it - there's some MacVidia project on the boards here that talks about it. Seems as if they're not fully functional yet. Link to comment https://www.insanelymac.com/forum/topic/8857-1043-boot-problem/#findComment-55482 Share on other sites More sharing options...
IceNio Posted February 11, 2006 Author Share Posted February 11, 2006 okey i disabled the HT , then i saw the Apple's apple (didn't saw before) , and the same {censored} as above except that there were many things about USB , so i disabled and the usb , and tried again. . . the same as above what i posted before just before the "Security auditing service present" now i got -> The Regends bla bla. . . . California . . . bla bla ................ some things...... IO APIC: Version 0x20 Vectors 0:24 ACPI: System State [s0 S3 S4 S5] (S3) Apple16X50ACPI1: Identified Serial Port on ACPI Device = UAR1 Apple16X50UARTSync1: Detected 16550AF/C/CF . . bla bla.. and the same things as the last time :/ Link to comment https://www.insanelymac.com/forum/topic/8857-1043-boot-problem/#findComment-55494 Share on other sites More sharing options...
cryptic Posted February 11, 2006 Share Posted February 11, 2006 i dont want to hijack this thread, yet i am having the same problem: panci(cpu 0 caller 0x0019C554): commpage no match on last routine Amd 2500 Gigabyte Motherboard K7 Triton Series 1 Gig DDR-333 Ram 80 Gig IDE Seagate Pioneer DVD-RW (out of mac g5 ) LG DVD FLoppy Realtek 10/100 PCI Radeon 9200 Pro Link to comment https://www.insanelymac.com/forum/topic/8857-1043-boot-problem/#findComment-55502 Share on other sites More sharing options...
R. Bear Helms Posted February 13, 2006 Share Posted February 13, 2006 (edited) AHA! A commpage fault! I had those. It took me several days. The problem was the disk image (dmg) was ok, but translating it to ISO did NOT match the MD5 checksum shown for it. Therefore, despite the patching working without complaints, despite it booting to a point - I'd get commpage faults. This is a fault regarding the SSE2/SSE3 functions, which are allegedly error-proof on all cpus with SSE2 or SSE3 instruction sets. I found the unregistered version of UltraISO does NOT create a correct output file from a dmg source. The MD5 doesn't match up. I go find UltraISO running registered, do the same function, the MD5 matches perfectly. I *LOATHE* crippleware. Either show me what you can do or just don't give me a lame example of a maybe works solution. Below is what the readme for 4.2b patches says: EDIT: Removed content violating DMCA I also have included the MD5 calculation utility used for generating this info as an attachment. Hm, attachments while editing no workee? Edited February 17, 2006 by Metrogirl Link to comment https://www.insanelymac.com/forum/topic/8857-1043-boot-problem/#findComment-55923 Share on other sites More sharing options...
fewyn Posted February 16, 2006 Share Posted February 16, 2006 (edited) EDIT: Removed content violating DMCA Hmm... my iso matches the md5 sum correctly but seems to have the same issue as the original poster. It's rather strange since I've had OS X installed before. Edited February 17, 2006 by Metrogirl Link to comment https://www.insanelymac.com/forum/topic/8857-1043-boot-problem/#findComment-57444 Share on other sites More sharing options...
kn-oeien Posted February 16, 2006 Share Posted February 16, 2006 Newbie here.... I have installed the 10.4.3 with wesleys patch... everything installed OK. When I boot into OSX, i get the apple logo, with the twirl under it. When this screen ends, and I am supposed to get the Apple first time startup screen i only recieve the blue background. What the hell am I doing wrong? The 10.4.1 is working perfectly, as a matter of fact I am writing this in 10.4.1:) I have a HP Pavilion DV4164, 1,86ghz Intel Pentium Centrino, with Intel GMA900 chipset, Broadcom internal wireless card. Link to comment https://www.insanelymac.com/forum/topic/8857-1043-boot-problem/#findComment-57523 Share on other sites More sharing options...
Recommended Posts