Jump to content
1 post in this topic

Recommended Posts

I have a Everex Stepnote 2053 running Tiger

 

It work flawlessly, but when I upgrade to Leopard I get nothing but kernel panics:

ApplePS2Trackpad or RTL8139

 

What do i need to copy from Tiger to prevet this?

 

Notebook specs:

Display: 12.1" WXGA Widescreen (1280 x 800) with DiamondBrite Technology, TFT Active Matrix LCD

Processor: Intel® Pentium Dual-Core Processor T2080 (1MB Cache, 1.73 GHz, and 533 MHz Front Side Bus)

Chipset: Intel® 943GML (Northbridge), Inte ICH7-M (Southbridge)

Memory: 1GB DDRII 533 SDRAM, 1 SO-DIMM Slot with 1GB maximum memory

Hard Disk Drive: 100GB SATA, 5400RPM, 9.5mm

Optical Drive: DVD-ROM/DVD+/-RW Double Layer Support (Maximum speed and compatiblity 4X DVD+R DL, 4X DVD-R DL, 6X DVD-RW, 8X DVD+RW, 8X DVD+R, 8X DVD-R, 8X DVD-ROM, 16X CD-RW, 24X CD-R, 24X CD-ROM)

Graphics: Intel® Graphics Media Accelerator (GMA) 950 with up to 224MB shared memory via DVMT 3.0 (Dynamic Video Memory Technology)

Audio: HD Audio with Built-in Speakers. Realtek ALC262-VC-GR High-Definition Audio Codec (Analog: 20-Bits Max Resolution, 192kHz Max Samping; Digital: 24-Bits Max Resolution, 96kHz Max Samping)

I/O Ports: (1) DB 15-Pin VGA Port, (3) USB, (1) Microphone Port, (1) Headphone Port, (1) IEEE1394

Modem: (1) 56K Motorola SM56 Data/Fax Modem (V.92, 56kbps)

LAN: (1) Realtek RTL8139, 10/100 Base-T Fast Ethernet

Wireless LAN: Built-in Broadcom BCM4318KFBG, 802.11b/g

Link to comment
https://www.insanelymac.com/forum/topic/88444-upgrading-help/
Share on other sites

×
×
  • Create New...