linde03 Posted February 12, 2008 Share Posted February 12, 2008 Hallo, hab gerade Kalyway 10.5.1 auf meiner Kiste installiert, leider hängt er bei der Einrichtung des Systems. Jedesmal wenn ich "Do not transfer my information now" auswähle dauert es ca. 1 Minute dann spring er wieder auf die Tastatur erkennung zurück. Gibt es eine möglichkeit das zu umgehen, ich denke es liegt daran das die Netzwerkkarte nicht erkannt wird bei einem anderem system hatte ich den selben fehler da half es das netzwerkkabel anzuschliesen. FOXCON 946GZ7MA -> Intel946GZ intel on bord grafik (suche eine low profile pci-x karte mit hdmi für OSX) Intel E2160 1,8GHz 2 GB DDR2 fg linde Link to comment https://www.insanelymac.com/forum/topic/87156-einrichtung-geht-nur-bis-transfer-my-information/ Share on other sites More sharing options...
BuDgi6 Posted February 14, 2008 Share Posted February 14, 2008 Hallo, habe das gleiche Problem, hat jemand eine Lösung?? Komme einfach nicht an dem Screen vorbei, er startet immer wieder neu.. Wäre euch sehr dankbar!!! Link to comment https://www.insanelymac.com/forum/topic/87156-einrichtung-geht-nur-bis-transfer-my-information/#findComment-624640 Share on other sites More sharing options...
riws Posted February 15, 2008 Share Posted February 15, 2008 SuFu How to: Install Error loop at account creation Issue: Upon install, the process hangs in an infinite (?) loop circling between chosing language and creating / transferring an user acount ("Do you already own a mac?"). According to the forum, the problem seems to be connected to problems concerning the network card. Solution 1: Importing an account from an existing (Tiger) installation. Solution 2: Booting with the flag "Graphics Mode"="640x480x32". The resulting low screen-resolution prevents the setup screen, thus skipping the "loop". As one is not able to create a new username, only the default "admin" is created. This can be changed later on. Solution 3: Some people reported success with disabling the network card in the bios or disconnecting the cable. Solution 4: Boot using "-s" flag then type -> /sbin/mount -uw / passwd root <- Type any password you want touch /var/db/.AppleSetupDone reboot Link to comment https://www.insanelymac.com/forum/topic/87156-einrichtung-geht-nur-bis-transfer-my-information/#findComment-625122 Share on other sites More sharing options...
Recommended Posts