slimvaio Posted February 2, 2008 Share Posted February 2, 2008 Hi I have burned the KALYWAY 10.5.1 DVD and when it goes to boot I get this message -------------------Computer Screen #1------------------------------------------- Use up and down keys to select the startup volume. hd(31,0) Leopard_Inatall_Osx86 Press Enter to start up Darwin/x86 with no options, or you can: Type -v and press ENter to start up with diagnostic messages Type ? and press Enter to learn about advanced startup options boot: ----------------------------------------------------------------------------------- That is the first screen, when I push Enter it goes to ============Computer Screen #2=========================== Press any ket to start up form CD-ROM, or press f8 to enter startup options ==================================================== Then I push Enter to start up from CD-ROM and it just keeps repeating Computer Screen #2(above) And when I push F8 it goes back to Computer Screen #1 Here is my computer ABIT IP35 Pro LGA 775 Intel P35 ATX Intel Motherboard EVGA 512-P3-N801-AR GeForce 8800GT 512MB 256-bit GDDR3 OC@4.2 Intel Core 2 Duo E8400 Wolfdale 3.0GHz LGA 775 Patriot Extreme Performance 8GB(4 x 2GB) 240-Pin DDR2 SDRAM DDR2 800 Western Digital Caviar SE WD1600AAJS 160GB 7200 RPM SATA 3.0Gb/s 4x Western Digital Caviar SE16 WD7500AAKS 750GB 7200 RPM SATA 3.0Gb/s SAMSUNG 20X DVD±R DVD Burner with LightScribe Black SATA Model LIAN LI PC-A05B Black Aluminum ATX Mid Tower Computer Case Please help, I am dying to this beast running OSX Link to comment https://www.insanelymac.com/forum/topic/85347-help-please-darwinx86-startup-problem/ Share on other sites More sharing options...
Recommended Posts