Pedro ! Posted January 30, 2008 Share Posted January 30, 2008 Hello, I am reading too much the forum and try all the options of installation. My hardware is: -Asus P5W DH Deluxe -Intel Core 2 Duo 6300 -Nvidia 6800 XT PCI-e -2 GB Ram 667 Mhz -HD SATAII 160 Gbs -DVD RW SATA Modify the Bios before installing and always I come to the same result. IDE configuration: Configure SATA as [AHCI] ALPE and ASP [Disabled] CPU Configuration: Microcode Updation [Enabled] Max CPUID Value Limit [Disabled] Execute Disable Function [Enabled] Enhanced C1 Control [Auto] CPU Internal Thermal Control [Auto] Virtualization Technology [Disabled] Intel SpeedStep tech [Disabled] Chipset: Hyper Path 3: [Disabled] Memory Remap Feature [Enabled] Onboard Devices Configuration: JMicron Controller Mode [Disabled] PCIPnP: Plug And Play O/S [Yes] Power: Suspend Mode [s3 only] Repost Video on S3 Resume [No] ACPI 2.0 Support [Yes] ACPI APIC support [Enabled] I attach screen of the code, please if someone can say to me that this happening. I try Vanilla kernel, without, -v -x, -v -legacy cpus=1, -s and never start. Only boot selector, apple grey and down black screen... Thank you! http://img86.imageshack.us/img86/7470/dsc04317qm7.jpg Already install Leopard RC2, iAtkos, Kalyway and everything is still confused... And Select MBR like my partition info in BootLoaders EFI. I need your helps ! Link to comment Share on other sites More sharing options...
Recommended Posts