fakezeta Posted January 8, 2008 Share Posted January 8, 2008 Hi, I have a HP nw8240 with a working (more or less ) Ati Mobility Radeon X700/FireGL V500SV. This is the System Profiler output: Chipset Model: Mobility Radeon X700/FireGL V5000 (M26) (PCIE) Type: Display Bus: PCIe VRAM (Total): 128 MB Vendor: ATI (0x1002) Device ID: 0x5653 Revision ID: 0x0000 Displays: Display: Resolution: 1280 x 1024 @ 60 Hz Depth: 32-bit Color Core Image: Supported Main Display: Yes Mirror: Off Online: Yes Quartz Extreme: Supported I can change resolution using an external monitor, but with the internal lcd I cannot change: not even with option at the boot menu. This is the output of the Callisto drivers from system.log Jan 8 11:13:24 localhost kernel[0]: CallistoHAL Initialized! Jan 8 11:13:24 localhost kernel[0]: Callisto: omni's ATI Driver&FrameBuffer, build 006, 20-May-2006 Jan 8 11:13:24 localhost kernel[0]: Callisto: Model Mobility Radeon X700/FireGL V500SV (r420) Jan 8 11:13:24 localhost kernel[0]: Callisto: MMIO range@0x18 (c8800000) mapped to kernel virtual address 0x29844000 Jan 8 11:13:24 localhost kernel[0]: Callisto: 128 MB DDR found on 128 bit wide bus Jan 8 11:13:24 localhost kernel[0]: Callisto: VRAM range@0x10 (c0000000:08000000) Jan 8 11:13:24 localhost kernel[0]: Callisto: Found ROM @0xc0000 Jan 8 11:13:24 localhost kernel[0]: Callisto: ATOM ATI BIOS detected Jan 8 11:13:24 localhost kernel[0]: Callisto: PLL values from ATOM BIOS: ref_clk=2700, ref_div=0, xclk=40000, min_freq=20000, max_freq=50000 Jan 8 11:13:24 localhost kernel[0]: Callisto: Port[0]: DDC: N/C, DAC: Primary, TMDS: Internal, Connector: Proprietary Jan 8 11:13:24 localhost kernel[0]: Callisto: Port[1]: DDC: DDC_MonID, DAC: Unknown, TMDS: Internal, Connector: Unsupported Jan 8 11:13:24 localhost kernel[0]: Callisto: No connector info table detected Jan 8 11:13:24 localhost kernel[0]: Callisto: Connection on port 1 not detected, but there is connection on port 2 (swapping 2->1) Jan 8 11:13:24 localhost kernel[0]: Callisto: Found Monitor: CRT Jan 8 11:13:24 localhost kernel[0]: Callisto: done with Mobility Radeon X700/FireGL V500SV I think that the problem is related to the internal display not being DDC compliant. My other big issue is that I cannot boot while not battery powered... Can anybody help me? Tnx in advance Link to comment Share on other sites More sharing options...
Recommended Posts