kwodo123 Posted November 6, 2007 Share Posted November 6, 2007 Finally i got Tiger working on my Medion Microstar (MSI) 6556-MT7 PC from MediaMarkt/Germany It's stable and runs very smooth. PC Specs: CPU: Intel Core2Quad E6600 2,4GHz Mainboard: Microstar MSI-7358 v1.1 Chipset: (Northbridge) Intel Bearlake G33 Express /w Intel GMA X3100 Chipset: (Southbridge) Intel ICH9R Controller: Intel ICH9R (SATA Ports 2/3/4/5 + 2x eSATA / 12x USB2.0) Marvell 88SE6111 (SATA Port 1 / Primary IDE)* VIA Firewire IEEE1394 VT6308 TI Firewire IEEE1394 Lan: Intel 82566DC-2 Gigabit Ethernet 10/100/1000* 3COM 3C905C-TX FastEthernet 10/100 PCI Card Audio: Intel HD Audio (Realtek ALC888 / 8-Chanal)* (needs ALC888Audio.mpkg.zip / AzaliaAudio.pkg.zip to work) Memory: 4x Swissbit DDR2 667MHz PC-5300 1GB DVD: Hitachi HL-DT-STDVDRAM GSA-H44 PATA (Master) /w Converter on SATA Port5 Hitachi HL-DT-STDVDROM GSA-H3N PATA (Master) HardDisks: Samsung 160GB SATA1 on Port2 (MacOSx86) Seagate 500GB SATA2 on Port3 (WinXP SP2 + WinVista Ultimate) Seagate 200GB SATA2 on Port4 (DATA) BIOS Settings: SATA Raid/AHCI Mode: AHCI Onboard SATA/IDE Device: Enable Onboard SATA/IDE Ctrl Mode: AHCI ACPI Suspend Type: S3 (STR) Working Out of the Box using MacOSx86 JaS AMD Intel SSE2 SSE3 (PPF1 & PPF2) Image: CPU=YES; ATA=NO; AUDIO=NO; FIREWIRE=YES; X3100=YES (NO CI/QE); MEM=YES; SATA=YES; USB=YES; LAN=NO; SLEEP ON POWER BUTTON=YES; Update with koolkal 10.4.10 Intel Combo SSE3 Only works without problems. Had to install MacOSx86 under Windows/VMware Workstation 6.x because lack of IDE support and i dunno have SATA DVD-Roms. No Problems at all. Intel HD Audio (Realtek ALC888 at ICH9R) working with these drivers: ALC888Audio.mpkg.zip + AzaliaAudio.pkg.zip (Stereo Out/No Input) Intel 82566DC-2 Gigabit Lan are unsupported. I'm using now a 3COM 3C905C-TX PCI Card, price: 3,00EUR Had to install AppleIONetworkingFamily.kext from OSx 10.4.3 and deleting AppleBCM5751Ethernet.kext to get working. TCP/IP - DHCP manual settings. The Marvell 88E8056 IDE isn't important for me. I upgraded the PATA DVD-RAM Drive with an SATA-Adaptor. Equip Converter IDE -> SATA Controller, price: 13,00EUR And i need a new PCIe Graphic card. Witch one is fully supported (CI/QE)? I have an eye on the 8800GTX. OK? GREETS, KAY Link to comment Share on other sites More sharing options...
D.Moscowstar Posted November 11, 2007 Share Posted November 11, 2007 8800 is now supported by Mac OS X. I have a question for you I have MSI p35 (7360) and i have a trouble. You used vmware 6 only for installation? after you can boot without it? Link to comment Share on other sites More sharing options...
edmoncu Posted November 11, 2007 Share Posted November 11, 2007 im confused what board that is... upon looking the web, i found links which pertains to this pic Q35MDO (MS-7358) however, i found no references of this board on MSI sites. anyhow, this board is strikingly similar to the more common G33 MSI boards G33M MSI Part No: MS-7357-010 G33M-FI are those the same boards? Link to comment Share on other sites More sharing options...
Dreamaker Posted November 11, 2007 Share Posted November 11, 2007 Finally i got Tiger working on my Medion Microstar (MSI) 6556-MT7 PC from MediaMarkt/Germany It's stable and runs very smooth. PC Specs: CPU: Intel Core2Quad E6600 2,4GHz Mainboard: Microstar MSI-7358 v1.1 Chipset: (Northbridge) Intel Bearlake G33 Express /w Intel GMA X3100 Chipset: (Southbridge) Intel ICH9R Controller: Intel ICH9R (SATA Ports 2/3/4/5 + 2x eSATA / 12x USB2.0) Marvell 88SE6111 (SATA Port 1 / Primary IDE)* VIA Firewire IEEE1394 VT6308 TI Firewire IEEE1394 Lan: Intel 82566DC-2 Gigabit Ethernet 10/100/1000* 3COM 3C905C-TX FastEthernet 10/100 PCI Card Audio: Intel HD Audio (Realtek ALC888 / 8-Chanal)* (needs ALC888Audio.mpkg.zip / AzaliaAudio.pkg.zip to work) Memory: 4x Swissbit DDR2 667MHz PC-5300 1GB DVD: Hitachi HL-DT-STDVDRAM GSA-H44 PATA (Master) /w Converter on SATA Port5 Hitachi HL-DT-STDVDROM GSA-H3N PATA (Master) HardDisks: Samsung 160GB SATA1 on Port2 (MacOSx86) Seagate 500GB SATA2 on Port3 (WinXP SP2 + WinVista Ultimate) Seagate 200GB SATA2 on Port4 (DATA) BIOS Settings: SATA Raid/AHCI Mode: AHCI Onboard SATA/IDE Device: Enable Onboard SATA/IDE Ctrl Mode: AHCI ACPI Suspend Type: S3 (STR) Working Out of the Box using MacOSx86 JaS AMD Intel SSE2 SSE3 (PPF1 & PPF2) Image: CPU=YES; ATA=NO; AUDIO=NO; FIREWIRE=YES; X3100=YES (NO CI/QE); MEM=YES; SATA=YES; USB=YES; LAN=NO; SLEEP ON POWER BUTTON=YES; Update with koolkal 10.4.10 Intel Combo SSE3 Only works without problems. Had to install MacOSx86 under Windows/VMware Workstation 6.x because lack of IDE support and i dunno have SATA DVD-Roms. No Problems at all. Intel HD Audio (Realtek ALC888 at ICH9R) working with these drivers: ALC888Audio.mpkg.zip + AzaliaAudio.pkg.zip (Stereo Out/No Input) Intel 82566DC-2 Gigabit Lan are unsupported. I'm using now a 3COM 3C905C-TX PCI Card, price: 3,00EUR Had to install AppleIONetworkingFamily.kext from OSx 10.4.3 and deleting AppleBCM5751Ethernet.kext to get working. TCP/IP - DHCP manual settings. The Marvell 88E8056 IDE isn't important for me. I upgraded the PATA DVD-RAM Drive with an SATA-Adaptor. Equip Converter IDE -> SATA Controller, price: 13,00EUR And i need a new PCIe Graphic card. Witch one is fully supported (CI/QE)? I have an eye on the 8800GTX. OK? GREETS, KAY Sorry, but I didn't understand you. Did you installed it natively or via VMware? Link to comment Share on other sites More sharing options...
Dreamaker Posted November 11, 2007 Share Posted November 11, 2007 I think that even if you got it to install via VMware, but i works very slowly. I installed Windows XP via VWware as virtualmachine, and it worked very very slow... live with 32Mb of RAM )) So we're looking for solution to install & boot in natively and full compatibly with bios. I've MSI P35 Platinum with BIOS v.1.5 (last, updated via Live Update 3) Link to comment Share on other sites More sharing options...
d.machorro Posted March 25, 2008 Share Posted March 25, 2008 Finally i got Tiger working on my Medion Microstar (MSI) 6556-MT7 PC from MediaMarkt/Germany It's stable and runs very smooth. PC Specs: CPU: Intel Core2Quad E6600 2,4GHz Mainboard: Microstar MSI-7358 v1.1 Chipset: (Northbridge) Intel Bearlake G33 Express /w Intel GMA X3100 Chipset: (Southbridge) Intel ICH9R Controller: Intel ICH9R (SATA Ports 2/3/4/5 + 2x eSATA / 12x USB2.0) Marvell 88SE6111 (SATA Port 1 / Primary IDE)* VIA Firewire IEEE1394 VT6308 TI Firewire IEEE1394 Lan: Intel 82566DC-2 Gigabit Ethernet 10/100/1000* 3COM 3C905C-TX FastEthernet 10/100 PCI Card Audio: Intel HD Audio (Realtek ALC888 / 8-Chanal)* (needs ALC888Audio.mpkg.zip / AzaliaAudio.pkg.zip to work) Memory: 4x Swissbit DDR2 667MHz PC-5300 1GB DVD: Hitachi HL-DT-STDVDRAM GSA-H44 PATA (Master) /w Converter on SATA Port5 Hitachi HL-DT-STDVDROM GSA-H3N PATA (Master) HardDisks: Samsung 160GB SATA1 on Port2 (MacOSx86) Seagate 500GB SATA2 on Port3 (WinXP SP2 + WinVista Ultimate) Seagate 200GB SATA2 on Port4 (DATA) BIOS Settings: SATA Raid/AHCI Mode: AHCI Onboard SATA/IDE Device: Enable Onboard SATA/IDE Ctrl Mode: AHCI ACPI Suspend Type: S3 (STR) Working Out of the Box using MacOSx86 JaS AMD Intel SSE2 SSE3 (PPF1 & PPF2) Image: CPU=YES; ATA=NO; AUDIO=NO; FIREWIRE=YES; X3100=YES (NO CI/QE); MEM=YES; SATA=YES; USB=YES; LAN=NO; SLEEP ON POWER BUTTON=YES; Update with koolkal 10.4.10 Intel Combo SSE3 Only works without problems. Had to install MacOSx86 under Windows/VMware Workstation 6.x because lack of IDE support and i dunno have SATA DVD-Roms. No Problems at all. Intel HD Audio (Realtek ALC888 at ICH9R) working with these drivers: ALC888Audio.mpkg.zip + AzaliaAudio.pkg.zip (Stereo Out/No Input) Intel 82566DC-2 Gigabit Lan are unsupported. I'm using now a 3COM 3C905C-TX PCI Card, price: 3,00EUR Had to install AppleIONetworkingFamily.kext from OSx 10.4.3 and deleting AppleBCM5751Ethernet.kext to get working. TCP/IP - DHCP manual settings. The Marvell 88E8056 IDE isn't important for me. I upgraded the PATA DVD-RAM Drive with an SATA-Adaptor. Equip Converter IDE -> SATA Controller, price: 13,00EUR And i need a new PCIe Graphic card. Witch one is fully supported (CI/QE)? I have an eye on the 8800GTX. OK? GREETS, KAY hey man can you explain me how do you get your audio working out y hace a dg31bu wich has the same alc888 ich9r but i cant get it to work it Link to comment Share on other sites More sharing options...
Recommended Posts