TOSHIBA M60 LAPTOP Installation -OK

[lunux]

I installed Mac os x JAS 10.4.8 on my laptop toshiba M60

 

Intel centrino

 

ATI Xpress 600 ( 1440x900x32 with KATANA 3.04 no QE-CI)

 

Firewire

 

USB 2.0

 

Realtek 8139

 

IW2200 wireless

 

AC 97 sound ( excellent)

 

installation was smooth as silk, partioning my HD in doble boot vista, osx, using ACRONIS DISK

 

-install vista then create partiotion, set both partitions primary, then reboot

in acronis set partition you want to use for MAC as ACTIVE

reboot in MAC DVD , install MAC OSX

finally

reboot and you can boot by F8 MAC and VISTA

no problem at all,

 

until now did not work

 

PCMCIA card bus texas

 

MODEM winmodem smartlink ( works under linux)

 

Bluetooth toshiba stack, no way to ahve it working)

 

Update to 10.4.10 perfectly done , download the update from here: http://supportdownload.apple.com/download....0.4.10Intel.dmg

 

 

then follow this instructions :

 

Below are the steps to update your computer to 10.4.10: (except for GMA 900 or GMA 950)

 

first of all , repair permission on the disk !!

1) Open up the terminal and type "sudo -s" then "your password" then the following (line by line):

 

CODE

cp /mach_kernel /old

 

cp -R /system/library/coreservices/loginwindow.app /

 

cp -R /system/library/extensions/AppleSMBIOS.kext /

 

cp -R /system/library/extensions/AppleACPIplatform.kext /

 

cp -R /system/library/extensions/AppleAPIC.kext /

 

cp -R /system/library/extensions/IOATAFamily.kext /

 

cp -R /system/library/extensions/system.kext /

 

2) Keep terminal open.

3) Open disk utility and keep it open

 

4) Run update file by Installer in the utilities (AND DO NOT RESTART---IGNORE THE INSTALLER WINDOW)

 

5) Open terminal and type the following:

 

CODE

 

cp /old /mach_kernel

 

cp -R /loginwindow.app /system/library/coreservices/

 

 

cp -R /AppleSMBIOS.kext /system/library/extensions/

 

cp -R /AppleACPIplatform.kext /system/library/extensions/

cp -R /AppleAPIC.kext /system/library/extension

 

cp -R /IOATAFamily.kext /system/library/extensions/

 

cp -R /system.kext /system/library/extensions/

 

rm -rf /system/library/extensions.*

 

6) Open disk utility and repair again permissions for your OS X partition

 

7)Reboot

 

It' done !!!

 

It works very well and I installed a lot of new MAC software , try it.

 

Note I follow the instructions from

hatsmasher

see in the forum: http://forum.insanelymac.com/index.php?sho...mp;hl=bluetooth

 

toshbt.zip ( 19.52K )

 

to set up my internal bluetooth but it does not work, probably I made some mystake.