Jump to content
4 posts in this topic

Recommended Posts

i need help installing onto a usb drive ok well ive already made the install dvd using Mac OS X 10.4.8 jas amd intel sse2 sse3 with ppf1 and ppf2.

i am using this guide http://######.com/software/osxusbnative.htm

and on step 6"Master Boot Record" option is not there is says "Pc Partition"in a rectangular box.

and it installed but it will not boot from my usb drive

1.Assuming your BIOS supports boot from USB device, did you change the priority of boot from USB? 1st should be your DVD drive, followed by USB.

2.The screenshot from that site uses OS X 10.4.9, and since you're using OS X 10.4.8 you might expect things a lil' bit different. I installed using the same installer as you're using and what you see is correct, and it is fine.

3.Is your machine Intel/AMD, and did you select the Intel/AMD portion of the items to install?

1.Assuming your BIOS supports boot from USB device, did you change the priority of boot from USB? 1st should be your DVD drive, followed by USB.

2.The screenshot from that site uses OS X 10.4.9, and since you're using OS X 10.4.8 you might expect things a lil' bit different. I installed using the same installer as you're using and what you see is correct, and it is fine.

3.Is your machine Intel/AMD, and did you select the Intel/AMD portion of the items to install?

 

 

oh ok i see yea i have intel so i installed intel and the essential system components but it wont boot and i have the BIOS set to usb drive to boot first.

the usb drive is has a partition set at fat32.

the usb drive is ntfs.

×
×
  • Create New...