Luzbel Posted January 8, 2006 Share Posted January 8, 2006 I managed to install 10.4.3 8F1111A on my system, but after my first reboot it locks in a blue screen just after the apple logo.The outpout of lspci command is following. Processor is PM740 and memory is 512MB DDRII. 0000:00:00.0 Host bridge: Intel Corp. Mobile Memory Controller Hub (rev 03) 0000:00:02.0 VGA compatible controller: Intel Corp. Mobile Graphics Controller (rev 03) 0000:00:02.1 Display controller: Intel Corp. Mobile Graphics Controller (rev 03) 0000:00:1c.0 PCI bridge: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 04) 0000:00:1c.1 PCI bridge: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 04) 0000:00:1c.2 PCI bridge: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3 (rev 04) 0000:00:1d.0 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04) 0000:00:1d.1 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 04) 0000:00:1d.2 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 04) 0000:00:1d.3 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 04) 0000:00:1d.7 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 04) 0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev d4) 0000:00:1e.2 Multimedia audio controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 04) 0000:00:1e.3 Modem: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 04) 0000:00:1f.0 ISA bridge: Intel Corp. 82801FBM (ICH6M) LPC Interface Bridge (rev 04) 0000:00:1f.2 IDE interface: Intel Corp. 82801FBM (ICH6M) SATA Controller (rev 04) 0000:00:1f.3 SMBus: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 04) 0000:06:01.0 CardBus bridge: Texas Instruments PCI1510 PC card Cardbus Controller 0000:06:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 0000:06:04.0 Network controller: Intel Corp. PRO/Wireless 2200BG (rev 05) I hope you can help me. Thank you! Link to comment https://www.insanelymac.com/forum/topic/6546-blue-screen/ Share on other sites More sharing options...
netgodsrdn2 Posted January 8, 2006 Share Posted January 8, 2006 (edited) I managed to install 10.4.3 8F1111A on my system, but after my first reboot it locks in a blue screen just after the apple logo.The outpout of lspci command is following. Processor is PM740 and memory is 512MB DDRII. I hope you can help me. Thank you! Sounds like the graphics card driver isn't loading entirely right. Boot into single user mode and move AppleIntel* out of /System/Library/Extensions and then reboot... Edited January 8, 2006 by netgodsrdn2 Link to comment https://www.insanelymac.com/forum/topic/6546-blue-screen/#findComment-40528 Share on other sites More sharing options...
Luzbel Posted January 8, 2006 Author Share Posted January 8, 2006 Well, this is frustrating I tried to reinstall before reading your answer and also got blue screen at the installer (which formerly had loaded OK with no added option like -x or whatever). I've just arrived now and tried to reinstall again, the result is the same: Apple Logo and then blue screen. I've tried enabling/disabling wifi, enabling/disabling execute bit..., normal boot and -x boot. Always get stuck on that blue screen. As I say, for first time installer ran OK without changing anything or adding options. Frustrating... My computer is Toshiba Satellite L20-101. Any help would be much appreciated. BTW, thank you for answering, dude! Link to comment https://www.insanelymac.com/forum/topic/6546-blue-screen/#findComment-40598 Share on other sites More sharing options...
netgodsrdn2 Posted January 8, 2006 Share Posted January 8, 2006 Well, this is frustrating I tried to reinstall before reading your answer and also got blue screen at the installer (which formerly had loaded OK with no added option like -x or whatever). I've just arrived now and tried to reinstall again, the result is the same: Apple Logo and then blue screen. I've tried enabling/disabling wifi, enabling/disabling execute bit..., normal boot and -x boot. Always get stuck on that blue screen. As I say, for first time installer ran OK without changing anything or adding options. Frustrating... My computer is Toshiba Satellite L20-101. Any help would be much appreciated. BTW, thank you for answering, dude! How long are you waiting at the blue screen during the install before you give up? On a couple of the machines I've installed it took a really long time before the installer came up. Just a thought. Also since the installer hasn't ran can't you just take out the install disk and boot the system? Or did you format it? Good luck, Ron Link to comment https://www.insanelymac.com/forum/topic/6546-blue-screen/#findComment-40610 Share on other sites More sharing options...
Luzbel Posted January 9, 2006 Author Share Posted January 9, 2006 I dd'ed it from /dev/zero before trying to reinstall. Pehaps I should wait longer. First time I installed I left the computer at its own and when I got back the installation screen was there. I'll try, thanks! Link to comment https://www.insanelymac.com/forum/topic/6546-blue-screen/#findComment-40639 Share on other sites More sharing options...
Luzbel Posted January 9, 2006 Author Share Posted January 9, 2006 (edited) I had no luck. I checked m5sums and all are OK. When burning, it gave no errors (burned at 1x just in case). I'd waited 30 minutes and the screen was steel blue Also tried playing around with BIOS settings, but it didn't help. The media surface has no scratchs, no dust, no stains... I'll test on a different PC to see if it works. What makes me angry is that it worked the first time... and no longer works. Regards Edit: I tried the DVD on another system and it works. So it must be OK :/ Help please! Edited January 9, 2006 by Luzbel Link to comment https://www.insanelymac.com/forum/topic/6546-blue-screen/#findComment-40660 Share on other sites More sharing options...
DrJägermeister Posted January 9, 2006 Share Posted January 9, 2006 (edited) I had no luck. I checked m5sums and all are OK. When burning, it gave no errors (burned at 1x just in case). I'd waited 30 minutes and the screen was steel blue Also tried playing around with BIOS settings, but it didn't help. The media surface has no scratchs, no dust, no stains... I'll test on a different PC to see if it works. What makes me angry is that it worked the first time... and no longer works. Regards Edit: I tried the DVD on another system and it works. So it must be OK :/ Help please! Do you tried all boot options like -x or platform=X86PC ? Type ? to see all bootoptions, try to combinate them. If nothing works type -v and note when it stops. Also try to disable all devices in the BIOS and unplug all external devices. Edited January 9, 2006 by DrJägermeister Link to comment https://www.insanelymac.com/forum/topic/6546-blue-screen/#findComment-40667 Share on other sites More sharing options...
patters Posted January 9, 2006 Share Posted January 9, 2006 I get that problem on my HP nc4200. The OS is installed fine (the installer always works). But once it's on the hard disk, the OS will only boot about 1 in 20 tries. See my post here: http://www.win2osx.net/forum/showthread.php?t=2512 Link to comment https://www.insanelymac.com/forum/topic/6546-blue-screen/#findComment-40700 Share on other sites More sharing options...
Luzbel Posted January 9, 2006 Author Share Posted January 9, 2006 I'd tried with most possible boot options before. Today, I tried with an attached VGA and it works fine, but my Phoenix bios doesn't support selecting between LCD/CRT and autoselect, and I'm not willing to use Windows just for this task... So I guess I'll mail Toshiba Tech Service to see if there is an alternative way to do it. The weird thing is that the installer loaded the first time, and had no longer worked without an attached VGA monitor. Link to comment https://www.insanelymac.com/forum/topic/6546-blue-screen/#findComment-40778 Share on other sites More sharing options...
DrJägermeister Posted January 10, 2006 Share Posted January 10, 2006 I'd tried with most possible boot options before. Today, I tried with an attached VGA and it works fine, but my Phoenix bios doesn't support selecting between LCD/CRT and autoselect, and I'm not willing to use Windows just for this task... So I guess I'll mail Toshiba Tech Service to see if there is an alternative way to do it. The weird thing is that the installer loaded the first time, and had no longer worked without an attached VGA monitor. Do you take a look here? (seems to be a similar problem) http://forum.osx86project.org/index.php?showtopic=6264&hl= Link to comment https://www.insanelymac.com/forum/topic/6546-blue-screen/#findComment-40874 Share on other sites More sharing options...
viriiman Posted January 12, 2006 Share Posted January 12, 2006 Sounds like the graphics card driver isn't loading entirely right. Boot into single user mode and move AppleIntel* out of /System/Library/Extensions and then reboot... How does one do that? Link to comment https://www.insanelymac.com/forum/topic/6546-blue-screen/#findComment-41803 Share on other sites More sharing options...
netvampire Posted November 21, 2006 Share Posted November 21, 2006 i had a similiar problem: I've seen the blue screen, but in the background the installer runs. I only see nothing. Now i've tried a external monitor on my notebook (it's a HP nx6310) and voila - i see the installer! But i don't no why. If i installed 10.4.6 and upgraded to 10.4.7 i've god no problems. mysterios... Link to comment https://www.insanelymac.com/forum/topic/6546-blue-screen/#findComment-239155 Share on other sites More sharing options...
Recommended Posts