johnjohn83 Posted September 15, 2007 Share Posted September 15, 2007 My ethernet chipset is a Realtek 8110SC . I have jas 10.4.8 installed. Is there any way to get that realtek to work or do I just need to buy a new card Link to comment Share on other sites More sharing options...
sammosinga Posted September 15, 2007 Share Posted September 15, 2007 RTGMac Ver1.1.6..google around...mine works..sorry cannot give u exect link.. Link to comment Share on other sites More sharing options...
CaptainNemo Posted September 16, 2007 Share Posted September 16, 2007 A tip: Install JaS 10.4.9 & Koolkas 10.4.10 - Koolkas includes a wide range of drivers incl. RTL811x series Link to comment Share on other sites More sharing options...
tihomir Posted October 10, 2007 Share Posted October 10, 2007 Yes, you can. Here is the driver: ftp://202.65.194.212/cn/nic/RTGMac_v1.1.6.zipEnjoy:)Yes, you can. Here is the driver: ftp://202.65.194.212/cn/nic/RTGMac_v1.1.6.zipEnjoy:) Link to comment Share on other sites More sharing options...
retromacg3 Posted October 10, 2007 Share Posted October 10, 2007 Thanks for that realtek 8110SC driver, it got my onboard nic working on my motherboard. My mobo specs are below. Sound started working with skippyretards alc888 codec (I chose 6 port, no digital, even though the board has a spdif jumper on it) JaS 10.4.8, no update yet. EDIT: Works with the 10.4.9 update as well Mfr Part Number: GA-945GCMX-S2 CPU: Socket 775 Support Intel Core 2 Extreme Dual-Core/ Core 2 Duo/ Pentium D/ Pentium 4/ Celeron D Processor; FSB 1066/800/533 MHz Chipset: Intel 945GC & ICH7 Memory: 2x 240pin DDR2-667/533 DIMMs, Dual Channel, Max Capacity 2GB Slots: 1x PCI-Express x16 Slot; 1x PCI-Express x4 Slot; 2x PCI Slots IDE/SATA: 1x ATA-100 Channel; 4x SATA2 Ports Audio: Realtek ALC888 Audio CODEC Video: Intel GMA 950 Graphics Controller LAN: Realtek 8110SC Gigabit Ethernet Controller Ports: 8x USB 2.0 Ports (4 rear, 4 by header); 2x PS/2 Ports; 2x Serial Ports (1 rear, 1 by header); 1x Parallel Port; 1x VGA Port; 1x RJ45 Port; Audio I/O Jacks Power Connector: 1x 24pin Main Power; 1x 4pin CPU Power Form Factor: Micro ATX, 22 x 24.4 cm Link to comment Share on other sites More sharing options...
Recommended Posts