audit13 Posted June 17, 2007 Share Posted June 17, 2007 Hi, I purchased an Asus P5B-VM board to replace my Asrock Conroe945-dvi which died. I am using the onboard graphics with a 250gb sata Seagate drive. The only way to get the Disk Utility to detect my sata drive is to select "compatible" mode under the ide option. However, it only detects it as being a 128gb drive. When I select enhanced mode, it is not seen in the Disk Utility. I looked for the AHCI option but this is only available for the Jmicron controller and not available for the ich8 sata. Any information would be appreciated. Thanks Link to comment Share on other sites More sharing options...
breakbot Posted June 21, 2007 Share Posted June 21, 2007 Hi, I purchased an Asus P5B-VM board to replace my Asrock Conroe945-dvi which died. I am using the onboard graphics with a 250gb sata Seagate drive. The only way to get the Disk Utility to detect my sata drive is to select "compatible" mode under the ide option. However, it only detects it as being a 128gb drive. When I select enhanced mode, it is not seen in the Disk Utility. I looked for the AHCI option but this is only available for the Jmicron controller and not available for the ich8 sata. Any information would be appreciated. Thanks See this post http://forum.insanelymac.com/index.php?s=&...st&p=360526 It explains which files you need to modify to get your sata drive recognised with the 'enhanced' setting in the bios. Link to comment Share on other sites More sharing options...
Recommended Posts