steren Posted April 2, 2007 Share Posted April 2, 2007 I'm using a scientific atlanta modem DPC2100 on Windows via a USB cable. It show as USB Cable Modem in USB devices on osx86 10.4.8 but cant get it work in network preferences. I cannot use the ethernet method. Any replies are GREATLY appreciated. Link to comment https://www.insanelymac.com/forum/topic/47299-problem-with-usb-cable-modem-in-1048/ Share on other sites More sharing options...
steren Posted April 13, 2007 Author Share Posted April 13, 2007 BUMP!! Link to comment https://www.insanelymac.com/forum/topic/47299-problem-with-usb-cable-modem-in-1048/#findComment-346461 Share on other sites More sharing options...
mspr Posted April 14, 2007 Share Posted April 14, 2007 Hi steren, to use an USB modem in OSX you need a driver for it. Unfortunately a lot of USB modem that work fine under WinXP don't work with OSX because of a lack of specific drivers. Look for a Macintosh/Linux driver for your modem In absence of a specific driver the only possibility is to change your modem with another one Obviously if you can use an ethernet device you solve the problem because in this case you don't need any driver. Link to comment https://www.insanelymac.com/forum/topic/47299-problem-with-usb-cable-modem-in-1048/#findComment-346494 Share on other sites More sharing options...
steren Posted May 2, 2007 Author Share Posted May 2, 2007 Cant find a driver for linux, actually it works fine in linux. I only can find this info, dont know if is useful for writing a driver: T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=02(comm.) Sub=00 Prot=00 MxPS=32 #Cfgs= 2 P: Vendor=069a ProdID=4402 Rev= 1.01 S: Manufacturer=Scientific-Atlanta S: Product=USB Cable Modem S: SerialNumber=0011E6726697 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=(none) E: Ad=85(I) Atr=03(Int.) MxPS= 8 Ivl=64ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=(none) I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms C: #Ifs= 2 Cfg#= 2 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=ff Driver= E: Ad=85(I) Atr=03(Int.) MxPS= 8 Ivl=64ms I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver= E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms Thanks for your help Link to comment https://www.insanelymac.com/forum/topic/47299-problem-with-usb-cable-modem-in-1048/#findComment-357296 Share on other sites More sharing options...
Recommended Posts