ugriecu Posted January 25, 2007 Share Posted January 25, 2007 (edited) Hi, in these days, with others guys, am going to find a solution for pcmcia card, wich failed to start....... Below the details: Notebook: Hp pavillion dv5251 (mine), hp dv,ze series (others ones ) -from system preferences: ADP2,1 -apci on -from kanotix (also kubunt puts out the same thing..): 8:06.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller Subsystem: Hewlett-Packard Company Unknown device 30a5 Flags: bus master, medium devsel, latency 168, IRQ 185 Memory at d2004000 (32-bit, non-prefetchable) Bus: primary=08, secondary=09, subordinate=0c, sec-latency=176 Memory window 0: 88000000-89fff000 (prefetchable) Memory window 1: 8c000000-8dfff000 I/O window 0: 00002400-000024ff I/O window 1: 00002800-000028ff 16-bit legacy interface ports at 0001 -from kubuntu: 08:06.0 CardBus bridge: Texas Instruments Unknown device 8039 Subsystem: Hewlett-Packard Company Unknown device 30a5 Flags: bus master, medium devsel, latency 168, IRQ 185 Memory at d2004000 (32-bit, non-prefetchable) Bus: primary=08, secondary=09, subordinate=0c, sec-latency=176 Memory window 0: 88000000-89fff000 (prefetchable) Memory window 1: 8c000000-8dfff000 I/O window 0: 00002400-000024ff I/O window 1: 00002800-000028ff 16-bit legacy interface ports at 0001 -start point: see this topic http://forum.insanelymac.com/index.php?showtopic=29583 -kext used: iopccardfamily.kext (probono's kext) -My procedure to modify iopccardfamily.kext: I used propertly plist editor to modify the memory value, so creating a new iopccardfamily.kext http://forum.insanelymac.com/index.php?act...ost&id=7117 (click this link to download my modified .kext). I don't need to change hex values with the hex edit because my id device is like probono's one... -my procedure to install it: 1- i drag it into extensions folder 2-open the terminal 3- run these commands sudo -s chmod -R 755 /System/Library/Extensions chown -R root:wheel /System/Library/Extensions touch /System/Library/Extensions and repair permissions.... after reboot from terminal i run dmesg | grep PC, but the pcard bus failed to start... in what step do i wrong? this is the same problem of the others laptop.... any help is precious... thanks for all.... bye ps: I used glitchman's kexts too, but the sistem crash... Edited January 25, 2007 by ugriecu Link to comment https://www.insanelymac.com/forum/topic/39847-need-some-help-many-people-hope-still-no-pccard-pcmcia/ Share on other sites More sharing options...
sheriffbounce Posted January 25, 2007 Share Posted January 25, 2007 Hi, in these days, with others guys, am going to find a solution for pcmcia card, wich failed to start....... Below the details: Notebook: Hp pavillion dv5251 (mine), hp dv,ze series (others ones ) -from system preferences: ADP2,1 -apci on -from kanotix (also kubunt puts out the same thing..): 8:06.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller Subsystem: Hewlett-Packard Company Unknown device 30a5 Flags: bus master, medium devsel, latency 168, IRQ 185 Memory at d2004000 (32-bit, non-prefetchable) Bus: primary=08, secondary=09, subordinate=0c, sec-latency=176 Memory window 0: 88000000-89fff000 (prefetchable) Memory window 1: 8c000000-8dfff000 I/O window 0: 00002400-000024ff I/O window 1: 00002800-000028ff 16-bit legacy interface ports at 0001 -from kubuntu: 08:06.0 CardBus bridge: Texas Instruments Unknown device 8039 Subsystem: Hewlett-Packard Company Unknown device 30a5 Flags: bus master, medium devsel, latency 168, IRQ 185 Memory at d2004000 (32-bit, non-prefetchable) Bus: primary=08, secondary=09, subordinate=0c, sec-latency=176 Memory window 0: 88000000-89fff000 (prefetchable) Memory window 1: 8c000000-8dfff000 I/O window 0: 00002400-000024ff I/O window 1: 00002800-000028ff 16-bit legacy interface ports at 0001 -start point: see this topic http://forum.insanelymac.com/index.php?showtopic=29583 -kext used: iopccardfamily.kext (probono's kext) -My procedure to modify iopccardfamily.kext: I used propertly plist editor to modify the memory value, so creating a new iopccardfamily.kext http://forum.insanelymac.com/index.php?act...ost&id=7117 (click this link to download my modified .kext). I don't need to change hex values with the hex edit because my id device is like probono's one... -my procedure to install it: 1- i drag it into extensions folder 2-open the terminal 3- run these commands sudo -s chmod -R 755 /System/Library/Extensions chown -R root:wheel /System/Library/Extensions touch /System/Library/Extensions and repair permissions.... after reboot from terminal i run dmesg | grep PC, but the pcard bus failed to start... in what step do i wrong? this is the same problem of the others laptop.... any help is precious... thanks for all.... bye ps: I used glitchman's kexts too, but the sistem crash... goto to your bios and disable FIREWIRE... and feel the magic!!! worked for me...ahhhh and use the NET-PCCard kexts from the PCMCIA-thread in the drivers section i used only the pccard-kext (with memory ranges edited) and pci-kext... cheers sheriff Link to comment https://www.insanelymac.com/forum/topic/39847-need-some-help-many-people-hope-still-no-pccard-pcmcia/#findComment-284408 Share on other sites More sharing options...
ugriecu Posted January 25, 2007 Author Share Posted January 25, 2007 in the bios options there's no way to disable my firewire card....... Link to comment https://www.insanelymac.com/forum/topic/39847-need-some-help-many-people-hope-still-no-pccard-pcmcia/#findComment-284413 Share on other sites More sharing options...
ugriecu Posted January 25, 2007 Author Share Posted January 25, 2007 NET-PCCard kexts where are??? Link to comment https://www.insanelymac.com/forum/topic/39847-need-some-help-many-people-hope-still-no-pccard-pcmcia/#findComment-284418 Share on other sites More sharing options...
ugriecu Posted January 26, 2007 Author Share Posted January 26, 2007 can you post working kext?(iopcifamili or others) Link to comment https://www.insanelymac.com/forum/topic/39847-need-some-help-many-people-hope-still-no-pccard-pcmcia/#findComment-285286 Share on other sites More sharing options...
ugriecu Posted January 30, 2007 Author Share Posted January 30, 2007 help Link to comment https://www.insanelymac.com/forum/topic/39847-need-some-help-many-people-hope-still-no-pccard-pcmcia/#findComment-289000 Share on other sites More sharing options...
Macoso Posted January 31, 2007 Share Posted January 31, 2007 Follow the super Ramjet compilation here Cheers Link to comment https://www.insanelymac.com/forum/topic/39847-need-some-help-many-people-hope-still-no-pccard-pcmcia/#findComment-289895 Share on other sites More sharing options...
Recommended Posts