[pre-release] macOS Sequoia

[cankiulascmnfye]

13 hours ago, miliuco said:

@cankiulascmnfye

I did edit my post 29 min ago, now it's so:

 

"Without this value, OCLP refuses to apply root patch. E.g. 67080000 is not valid for OCLP. 

OCLP accepts 67080000 (0x867) to apply root patch. I was wrong."

 

And a later post:

 

"I don't have enough knowledge to compare both values in terms of their meaning as bitmask and the values that csrutil can have"

 

But I understand your post and the idea of 0x803 as a minimum required. And that 0x867 is a higher hex number.

 

Do you and me both learn one new thing a day or do we not understand the bit mask concept? Or maybe both? (too much both in the text).

 

Well, while I wrote ny response, you already posted another response in the meantime after testing the bitmask, thats why there's an overlap. Sorry for that.

 

Side-Note: this is from the latest changes to the OCLP Postinstall doc regarding SIP: https://github.com/dortania/OpenCore-Legacy-Patcher/commit/580fb83b4da6178c96a9c64dae6399342c519a8d

 

PS: I am going to try to enable Intel Quick Sync Videon on my newly acquired 27" iMac 2011 now which I installed an i7 and an NVIDIA 1100M Card on which I flashed via SSH.

 

[ANTIKO]

Good day! My hands do not give me rest)), I decided to completely reinstall Mac os, and I do not understand if the last commit https://github.com/dortania/OpenCore-Legacy-Patcher/actions/runs/10031514026 does not work in 24A5289h?

[deeveedee]

2 hours ago, miliuco said:

@deeveedee

The smile icon I put in your last post was for the “you and me both” joke.

But for the text you added as Edit about bit fields, bit masks, etc. I would need an open mouth icon. Excellent text.

I had not read khronokernel’s article but I found it very interesting.

 

I'm glad this put a smile on your face!  There are many posts on which I would like to be able to apply two different emojis.  Agree that Khronokernel's article is good reading.  Still learning.  😀

[ANTIKO]

34 minutes ago, eSaF said:

Good day Bro, Unfortunately the latest Nightly does not work for me either and a few others.

This one - https://github.com/dortania/OpenCore-Legacy-Patcher/actions/runs/9783955206 - (before) works perfectly.

Good luck.

Causes a cyclic reboot, and the spare EFI does not save)).

[droples]

15 minutes ago, ANTIKO said:

Causes a cyclic reboot, and the spare EFI does not save)).

[ANTIKO]

8 minutes ago, droples said:

While I'm busy reinstalling the macOS, I'll check later.

[ANTIKO]

1 hour ago, droples said:

I'm sorry, and what should I have understood from your comment? the same thing that I downloaded.

[ANTIKO]

15 hours ago, eSaF said:

@ANTIKO Sorry you're still having a problem, but I suspect there's something amiss in your configuration.

You shouldn't be experiencing that kind of panic with the example I posted for you.

What am I doing wrong - and what can't I understand)), if it's not difficult, look? Sometimes you need a look from the outside))

https://github.com/dortania/OpenCore-Legacy-Patcher/actions/runs/9783955206

It is after applying the patch after a reboot that a cyclic reboot begins))

EFI.zip

Edited July 22, 2024 by ANTIKO

[deeveedee]

@ANTIKO I reviewed your posted EFI and am confused.  What version of macOS are you trying to patch with OCLP 1.6.0 Nightly?

 

I ask, because your config.plist does not have the updated Acidanthera kexts or the boot-arg -lilubetaall required for Sequoia Beta installation.  Your EFI includes the following kexts (that are not yet updated for Sequoia) 

• AppleALC.kext 1.9.0 (1.9.1 is available here)

• Lilu.kext 1.6.7 (1.6.8 is available here)

• WhateverGreen.kext 1.6.6  (1.6.7 is available here)

If you do not want to upgrade Acidanthera kexts, you should be able to use boot-arg -lilubetaall.

 

Again, what version of macOS are you trying to patch with OCLP 1.6.0 Nightly?

 

 

Edited July 22, 2024 by deeveedee

[jlrycm]

On 7/2/2024 at 8:29 AM, miliuco said:

@jlrycm

Yes, run these commands but not always fix the issue in Sonoma and Sequoua. 

 

From OpenCore developers:

 

Removing badges (This works until macOS 13)

If using RestrictEvents to block PCI and RAM configuration notifications, they will go away, but the alert in the Apple menu will stay. To get rid of this alert, run the following commands:

defaults delete com.apple.SlotNotificationsPref memoryBadgeCount
defaults delete com.apple.SlotNotificationsPref expansionBadgeCount

 

@miliuco I finally got rid of the alert in sequoia beta by adding the -revbeta boot arg

Edited July 22, 2024 by jlrycm

[ANTIKO]

12 hours ago, deeveedee said:

@ANTIKO 

Again, what version of macOS are you trying to patch with OCLP 1.6.0 Nightly?

You could have read a little higher))

 

12 hours ago, eSaF said:

Hi Bro, I added -V to the boot-arg of your config.plist so that if you have a panic, you can see where and what is wrong.

Also I don't know if or how much these two will help also added to boot-arg revpatch=sbvmm and -lilubetaall but they are generally used for Beta versions.

 

I suggest try the attached revised EFI, clean Nvram and see what result you get at boot up then try the same OCLP Nightly version I recommended 

previously and let us know  the result good or bad. Good luck.

 

BTW - I noticed some of your kexts were out dated (see attached) I took the liberty to update to the latest versions for you.

 

 

EFI.zip 7.26 MB · 0 downloads

I'll try it now - thanks.

[deeveedee]

6 minutes ago, ANTIKO said:

You could have read a little higher))

 

I'm sorry for not explaining myself clearly.  I know what macOS version that you posted, but your EFI is not compatible with macOS Sequoia.  I was asking you to confirm your installed version of macOS.  Again, I'm sorry for not explaining my question more clearly.

Edited July 22, 2024 by deeveedee

[ANTIKO]

12 hours ago, deeveedee said:

@ANTIKOboot-arg -lilubetaall.

Not needed

12 hours ago, deeveedee said:

but your EFI is not compatible with macOS Sequoia

Everything works fine in 24A5289h

12 hours ago, deeveedee said:

• AppleALC.kext 1.9.0 (1.9.1 is available here)

• Lilu.kext 1.6.7 (1.6.8 is available here)

• WhateverGreen.kext 1.6.6  (1.6.7 is available here)

 

12 hours ago, eSaF said:

BTW - I noticed some of your kexts were out dated (see attached) I took the liberty to update to the latest versions for you

Yes, guys, my inattention is to blame)), thank you very much for your help. Updated the cupcakes - everything is fine now))

12 hours ago, deeveedee said:

but your EFI is not compatible with macOS Sequoia

Everything works fine in 24A5289h

[ANTIKO]

12 hours ago, eSaF said:

RestrictEvents.kext in the kext folder and config.plist entry also.

Thanks - but everything works fine without that))

[deeveedee]

@eSaF Sorry for the confusion.  I was only reminding you, because you added a RestrictEvents boot-arg without adding the kext.  If Antiko does not need the kext, he does not need the boot-arg (and vice-versa).

 

@ANTIKO I'm more confused now than I was before offering to help you.  How did you install Sequoia with the EFI that you posted here (the EFI that included out-dated kexts that are not compatible with Sequoia).  Maybe this is something new for me to learn?  I was not able to install macOS Sequoia until I upgraded Acidanthera kexts for Sequoia -OR- used -lilubetaall boot-arg (the boot-arg or the updated kexts, not both). 

 

Was anyone else able to install Sequoia Beta without -lilubetaall boot-arg and with the old kexts that I listed here?

[ANTIKO]

12 hours ago, deeveedee said:

How did you install Sequoia with the EFI that you posted

During installation, some were disabled, but yes, I installed it with this set.

12 hours ago, eSaF said:

Are you seeing up all available WIFI connections around you like my example?

Yes, it's all right.

12 hours ago, eSaF said:

I don't know, maybe instead of a clean install as I did on my machine, he upgrade from Sonoma.

I was doing a clean install.

[ANTIKO]

12 hours ago, eSaF said:

I am still confused, but if you say it's all right and you're happy

I am currently at the ranch)), there is only Internet from the iPhone. Civilization is far away)). I'm resting)

Edited July 22, 2024 by ANTIKO

[deeveedee]

10 minutes ago, ANTIKO said:

During installation, some were disabled, but yes, I installed it with this set.

Yes, it's all right.

I was doing a clean install.

Now I'm more confused.  The kext versions in your OCAT screenshot do not match the kext versions in the EFI you posted. If you installed Sequoia with the kexts in your screenshot, that makes sense.

 

Glad you figured it out!

[ANTIKO]

14 minutes ago, deeveedee said:

OCAT screenshot

It's from a flash drive.

15 minutes ago, deeveedee said:

EFI you posted

With SSD with 24A5289h installed

15 minutes ago, eSaF said:

messing about with a Hack.

That's exactly what I'm doing))

19 minutes ago, eSaF said:

So now I take it your initial problem is solved??!! (until the next time?

Sometimes an outside view is needed.

[mek21]

Note: this was resolved with an upgrade/install of DP4.

 

Has anyone managed to get Sequoia to boot to desktop on an HP laptop with Skylake CPU and 520 graphics spoofed to Kabylake?   There appears to be something blocking or possibly not loading when transitioning to the desktop and neither a clean install nor upgrade/install resolves the issue.  Note that the current config boots Catalina through Sonoma without hanging at login.

 

In as much as there are web references to the (after login) hang experienced by real mac users, none of the proposed solutions have worked. So the issue with hackintosh may be due to a different cause such as config.plist configuration.

 

Incidently, am wondering why the lapic kernel flag does not function to the extent that it is necessary to use the cpus=1 in kernel args in orderfor the boot to not hang with HP hardware.

 

Regarding SMCProcessor.kext,  since Ventura beta 3, booting the HP laptop with this kext causes KP and it has been necessary to use FakeSMC and related kexts to recognize processor when booting with either Clover or Open Code.

 

After considerable research I have drawn a blank to solve the boot hang issue, and since many of you have significantly more experience than me with boot issues, can someone show me specific config.plist parameters to solve the login boot hang issue, as well as any relevant comments/observations regaring the cpus=1/lapic issue and the SMCProcesor KP issue.

 

Reposting the clover and open core config.plist files.

 

Thank you.

 

 

clover5159_config.plist opencore101_config.plist

Edited July 27, 2024 by mek21
update

[fabiosun]

 

14,65 Gb here (i use OCLP for broadcom WIFI)

Edited July 23, 2024 by fabiosun

[maly70]

Hey mates Sequoia Beta 4 is out

 

[maly70]

it went smooth with z790

[strangeron]

😀

 

[mek21]

Can please post full installer download link for beta4?

 

Thank you.