Hugh Welles Posted November 20, 2021 Share Posted November 20, 2021 Hello, Bluetooth works and I can see my wifi network, yet if I turn off the LAN, I have no connectivity to the internet. This can't be an ISP problem because all my other devices work including this device while using ethernet. Background: I've recently updated my CPU and motherboard to a 5800X and an ASUS X570-P mobo. I've installed the kexts listed in this post here. Wifi worked before the upgrade. Can anyone point me in the right direction? My EFI CPU: AMD Ryzen 7 5800X Mobo: Asus X570-P BT/Wifi: TP Link Archer TX50E LAN: RealtekRTL8111 (Should I be using different? This Mobo can support up to 10Gpbs) GPU: Radeon RX580 BootLoader: OpenCore 0.7.5 Quote Link to comment https://www.insanelymac.com/forum/topic/349674-tp-link-archer-tx50e-no-internet-but-can-log-into-wifi-bt-works/ Share on other sites More sharing options...
Hugh Welles Posted November 21, 2021 Author Share Posted November 21, 2021 (edited) It was DHCP initially. No luck trying manual configuration supplying the gateway IP. I no longer have the "!", but if I turn off the ethernet interface, I get no internet, likewise, I can't get into the gateway management page. Pinging on wifi doesn't work either: ping 192.168.192.1 PING 192.168.192.1 (192.168.192.1): 56 data bytes ping: sendto: No route to host ping: sendto: No route to host Request timeout for icmp_seq 0 ping: sendto: No route to host Request timeout for icmp_seq 1 ping: sendto: No route to host Request timeout for icmp_seq 2 Wi-Fi: Type: AirPort Hardware: AirPort BSD Device Name: en1 IPv4 Addresses: 192.168.192.100 IPv4: Addresses: 192.168.192.100 Configuration Method: Manual Router: 192.168.192.1 Subnet Masks: 255.255.255.0 IPv6: Configuration Method: Automatic Ethernet: MAC Address: c8:e2:65:0f:23:28 Media Options: Media Subtype: Auto Select Proxies: Exceptions List: *.local, 169.254/16 FTP Passive Mode: Yes Service Order: 2 Wifi.log from the console is here. I have no experience looking at these, but a recurring item is: <kernel> AirportItlwm::getSSIDData(): Get failure: APPLE80211_IOC_SSID: -536870212 Don't really know what that means or if it's relevant. Edited November 21, 2021 by Hugh Welles Quote Link to comment https://www.insanelymac.com/forum/topic/349674-tp-link-archer-tx50e-no-internet-but-can-log-into-wifi-bt-works/#findComment-2772253 Share on other sites More sharing options...
Hugh Welles Posted November 21, 2021 Author Share Posted November 21, 2021 (edited) So I'm getting conflicting info here. The network manager says "Wifi is turned on but is not connected to a network". If I click the "no internet connection" in the applet in the menu bar, I get "Your Mac successfully joined the Wi-Fi network, but cannot reach the internet." See images. It doesn't seem like I'm connected to wifi as I can't access anything on the intranet without the ethernet connection. Also if I change to DHCP, I don't get an IP address. Edited November 21, 2021 by Hugh Welles Quote Link to comment https://www.insanelymac.com/forum/topic/349674-tp-link-archer-tx50e-no-internet-but-can-log-into-wifi-bt-works/#findComment-2772257 Share on other sites More sharing options...
Hugh Welles Posted November 21, 2021 Author Share Posted November 21, 2021 (edited) Ok, so I updated the kext. I realized the initial post was linking to old releases. That fixed all my wifi issues and broke my bluetooth Updated bluetooth kexts to 2.0.0, still no card recognition for that. Thanks for chatting through that with me Edited November 21, 2021 by Hugh Welles Quote Link to comment https://www.insanelymac.com/forum/topic/349674-tp-link-archer-tx50e-no-internet-but-can-log-into-wifi-bt-works/#findComment-2772261 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.