philarticolo31 Posted May 9, 2020 Share Posted May 9, 2020 Hi all (and maybe sorry for my English), I've installed Mojave 10.14.6 on my Hackintosh build, everything seems working fine except the video output. The computer is connected to my Samsung Tv 4k series 5 via DisplayPort - HDMI cable on port HDMI2/DVI. When I turn on the Hackintosh, Mojave boots up correctly and I see the desktop after UefiBIOS and Clover, but when I switch to source HDMI3 or 4 and so on and I go back to HDMI2/DVI the tv shows "no signal" message, but the computer is still working properly because if I connect via VNC I can use it. The only way to exit to this impasse is to unplug and plug the cable back and sometimes screen turns on. Other times when this trick does not work, the only way is to shut down with the power button and power on... then go back to work. The same issue happens when I switch off the tv with computer running and turn on tv ... it's seems like de video card (AMD RX 560 4GB) or the system(?), does not recognize the tv. I hope someone can help to solve this issue. These hare the specs of my Hackintosh: i5 - 9600k 3,7ghz ASUS ROG Strix H370-I Gaming Corsair Vengeance DDR4-3200 16x2 SP Silicon Power Silicon Power SSD PCIe M.2 NVMe 512GB Gen3x4 PSU EVGA Supernova 450 GM iogear GBU521 W6 Bluetooth USB Case NZXT H210 Radeon RX 560 4 GB (soon I will replace with RX 580 8GB) Thanks, Link to comment Share on other sites More sharing options...
Recommended Posts