Jump to content

ASUS P8H77-V Disks won't show up

2 posts in this topic

Recommended Posts

Hi there!

It's my first Hackintosh, so I'm still trying to figure this one out. I saw that my system should be compatible, so I've decided to try it out.

But when I boot from USB Disk Utility can't see my HDDs. Any of them. Right now they're all NTFS.

My System:
Motherboard: ASUS P8H77-V
CPU: i7 3770K
GPU: Palit NVidia GTX770 4gb

What I've tried so far:
Creating a USB drive with [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]
Creating a USB drive with Clover manually
Setting AHCI mode in BIOS
Using AppleAHCIport, AHCIPortInjector kexts.

The result is always the same: no drives are visible through Disk Utility.

I would really aprreciate if you give some suggestions or ideas.

Share this post

  • 3 months later...


there is a chance that you suffer from ICH10R issue. You can attempt to fix it by following instructions which you will find in Google 'ICH10R and High Sierra' or 'vit9696 ich10'.

Just create other config file for example 'config_ich10r.plist' and select it in the clover bootloader settings at boot time -- with any luck you should see your hard drives.

I had similar problem with P7H55M LX mainboard, this patch fixed the problem. Only one problem which left is that I have to press reset once 'on first power on' otherwise USB ports are not recognized/activated and USB keyboard is not responsive.

NOTE: Disk utility will not show 'foreign' partitions unless you will choose an option 'show drives' (see left top corner of the utility) 

Give it a try and see if it will solve your problem.


Share this post