Jump to content
  • Announcements

    • Allan

      Forum Rules   04/13/2018

      Hello folks! As some things are being fixed, we'll keep you updated. Per hour the Forum Rules don't have a dedicated "Tab", so here is the place that we have our Rules back. New Users Lounge > [READ] - InsanelyMac Forum Rules - The InsanelyMac Staff Team. 
Sign in to follow this  
Diz-X

Second videocard using Natit on mac pro

6 posts in this topic

Recommended Posts

Hey,

 

I have a spare pci-e x600 pro videocard (PC Version) and I was thinking to add it to my system (Mac Pro). My system has already a X1900 XT as primary videocard. I installed Natit, and it detects the x600 but the display doesn't get signal from the VGA port. Both displays on the x1900 XT work perfectly.

 

 

Output from System Profiler: Graphics/Displays

 

ATI Radeon X600 Series:

 

Chipset Model: ATI Radeon X600 Series

Type: Display

Bus: PCIe

Slot: Slot-4

Vendor: ATI (0x1002)

Device ID: 0x5b62

Revision ID: 0x0000

Displays:

Display:

Display:

 

 

Output from Dmesg on the prompt:

 

Natit: Starting.

device-id: 0x5B72

Natit: Found device

Natit: Found device name

Natit: Setting device_type=ATY,AlopiasParent

Natit: Setting @1,device_type=display

Natit: Setting @0,compatible=ATY,Alopias

Natit: Setting @0,display-connect-flags=0x00000400

Natit: Setting @1,compatible=ATY,Alopias

Natit: Setting @1,display-connect-flags=0x00000400

Natit: Setting @1,name=ATY,Alopias

Natit: Setting @0,name=ATY,Alopias

Natit: Setting @0,device_type=display

Natit: Setting model=ATI Radeon X600 Series Secondary

Natit: Starting.

device-id: 0x5B62

Natit: Found device

Natit: Found device name

Natit: Setting device_type=ATY,AlopiasParent

Natit: Setting @1,device_type=display

Natit: Setting @0,compatible=ATY,Alopias

Natit: Setting @0,display-connect-flags=0x00000400

Natit: Setting @1,compatible=ATY,Alopias

Natit: Setting @1,display-connect-flags=0x00000400

Natit: Setting @1,name=ATY,Alopias

Natit: Setting @0,name=ATY,Alopias

Natit: Setting @0,device_type=display

Natit: Setting model=ATI Radeon X600 Series

 

 

If you need any other info please let me know!

Share this post


Link to post
Share on other sites

hi,

 

whats vs. of natit you are use? aty, alopiar is used for x1800, please if possible you send your ioreg-l

 

thnks

Share this post


Link to post
Share on other sites

I have two X1800 GTO's and was wondering this same thing. I think I'm using Natit.kext 1.0, but I will check again when I get home soon. I can also provide an ioreg -l if needed. I'm running an ATI Crossfire 3200 motherboard as well. Also, dual screen, rotation, QE/CI, Resolution changing all work beautifully. I have three monitors as well: 1 Dell 1905FP 19" flat panel and 2 NEC FE1250+.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

×