Gigabyte H61M-D2-B3 macOS 10.13 slow sleep + bad wake

[jaliskillu]

Hi,

 

I need some help, if possible ...

 

I was in mac 10.12 and all work ok. But, when I update to 10.13 I've got problems on sleep + wake and a problem with 1 HDD (de-attached auto. and no chance to mount again)

When I put Hackintosh to sleep it needs more than 2 minutes with SDD+HDD led on all the time. After this time, it sleeps but when wake I get a black screen and only the mouse cursor. HDD led brighting again. No option to do anything else. After a time cursor becomes coloured wheel then hangs.

 

Another tip: 1 of my HDD is unmounted auto. and no way to see in DU or 'diskutil list'  again after 30-45 minuts of system start.

 

I attach my clover config.plist, the unpatched DSDT, and modified one. If you need more files please tell.

 

Thanks to all.

 

My specs: Gigabyte H61M-D2-B3, 16 Gb RAM, 1 SSD, 2 HDD.

 

Emuaj.

H61M-D2-B3.zip

[jaliskillu]

I'm at the same point after several Clover and macOs 10.13.x updates. Any clue please?

[kjp4756]

I had the same issue with my p7p55d.   You need to patch AppleAHCIPort.  Best way to do that is using the following 2 patches in clover:

 

			<dict>
				<key>Comment</key>
				<string>fix I/O error for ICH10</string>
				<key>Disabled</key>
				<false/>
				<key>Find</key>
				<data>
				RYX2D5XCiciD4P5mhcl4D4TSdQs=
				</data>
				<key>Name</key>
				<string>AppleAHCIPort</string>
				<key>Replace</key>
				<data>
				iciD4P5mhckPmMFBCMyQkJCQdQs=
				</data>
			</dict>
			<dict>
				<key>Comment</key>
				<string>fix I/O error for ICH10</string>
				<key>Disabled</key>
				<false/>
				<key>Find</key>
				<data>
				icglQGACAD1AIAAAdQyB4b9///+Ji1EBAAA=
				</data>
				<key>Name</key>
				<string>AppleAHCIPort</string>
				<key>Replace</key>
				<data>
				kJCQkJCQkJCQkJCQkJCQkJCQkJCQkJCQkJA=
				</data>
			</dict>

 

[jaliskillu]

Thanks kjp4756!!

 

I've done some sleep-wake cycle tests and seems to work. Sleep is now fast (like in 10.12 was) and wake up is fast and stable.

What I don't test yet is the stability of my second HDD after 40-45 minutes, but I believe it's related to the same issue so should be fixed too. I'll keep you informed if it fails.

 

I reiterate my thanks.

[jaliskillu]

I have a question... Is there any web repository for Patched Kexts? I do some search and can't find any.

[jaliskillu]

On 5/10/2018 at 5:42 PM, kjp4756 said:

I had the same issue with my p7p55d.   You need to patch AppleAHCIPort.  Best way to do that is using the following 2 patches in clover:

 

			<dict>
				<key>Comment</key>
				<string>fix I/O error for ICH10</string>
				<key>Disabled</key>
				<false/>
				<key>Find</key>
				<data>
				RYX2D5XCiciD4P5mhcl4D4TSdQs=
				</data>
				<key>Name</key>
				<string>AppleAHCIPort</string>
				<key>Replace</key>
				<data>
				iciD4P5mhckPmMFBCMyQkJCQdQs=
				</data>
			</dict>
			<dict>
				<key>Comment</key>
				<string>fix I/O error for ICH10</string>
				<key>Disabled</key>
				<false/>
				<key>Find</key>
				<data>
				icglQGACAD1AIAAAdQyB4b9///+Ji1EBAAA=
				</data>
				<key>Name</key>
				<string>AppleAHCIPort</string>
				<key>Replace</key>
				<data>
				kJCQkJCQkJCQkJCQkJCQkJCQkJCQkJCQkJA=
				</data>
			</dict>

 

Hi again!!

These 2 patches worked until 10.14.3. Now, in 10.14.4 it doesn't work again. Some changes in AppleAHCIPort.kext kills my Hackintosh.

Does anyone realize? Are there new patches?

Thanks.

 

P.S.Not hardly tested but a rollback of AppleAHCIPort.kext to 10.14.3 keeping Patches seems to work allowing sleep + wake and system doesn't hangs... so I think it's a AppleAHCIPort.kext problem.

Edited April 3, 2019 by jaliskillu

[tenorism]

Hello,

I have the same motherboard

Gibabyte H61M-D2-B3 F10,

a slightly different cpu

Core i3-2130 3.4 GHz

and a Geforce 210.

It has been many years since I installed Hackintosh, if I remember well it was iatkos Snow Leopard. I am a linux user and I want MACOSX for Logic.

I am stuck (many failures) and I don't know which is the best MacOS to begin with.

Since you have succesfully installed can you please give me a direction to follow?

 

Thanks

 

 

[jaliskillu]

Hi! I'm in 10.15.4 in this computer. A few hints:

1)Install clover in legacy mode. No special DSDT nor SSDT.

I have a PCI with usb3 ports, so legacy is mandatory: XHCHI.efi needed (only available in legacy mode)

2)A few common patches over some kexts: AppleHCI, AppleAHCIport + Apple RTC

3)Clover config: FixIPIC, FixHPET, FixRegions, FixRTC, DeleteUnused, FixMutex, Generate Pstates, Generate Cstates, patch APIC, FixHeaders, DisableASPM

4)Boot flags: darkwake=1 npci=0x2000 kext-dev-mode=1 -no_compat_check

5)USB: inject,Add ClockId,FixOwnership,HighCurrent

6)Audio: Inject:12 + ResetHDA (I use AppleALC injection but voodooHDA works too by injecting: 1 instead)

7)Inject System ID

8)EFI/BIOS drivers folder: apfs_patched,appleImagecodec,Applekeyaggregator,appleuitheme,aptiomemoryfix,audiodxe,firmwarevolume,fsinject,hfsplus,ntfs,smchelper,usbmousedxe,vboxext-2,vboxext-4,vboxiso9660,XHCI

9)Kexts/other: applealc,diskarbitrationfixup,eficheckdisabler,fakesmc+plugins,hibernationfixup,lilu,nightshiftunlocker,RealtekRTL81xx_090_lnx2,usbinjectall,whatevergreen

10)Automatic OS updates doesn't work for me, but manual works by changing SMBIOS on clover boot,  then mac allow to install combo updates.

Hope it helps. Feel free to ask

 

 

Edited April 29, 2020 by jaliskillu