LeBaldi Posted May 6, 2017 Share Posted May 6, 2017 Hi Guys! First, sorry for some mistake in grammar, I'm very rusty with English heheheSo... first... my specs are:ASRock Z77 Extreme 4i5 3570K16gb RAM 1600 (4x4)MSI GTX660SSD Corsair X110HD 2TB SeagateSo... I installed the Sierra 10.12.4 without any problems, used personal kexts to my settings and everything was working great! Even Turbo overclocked of my CPU with SMBIOS iMac 12,2.... BUUUUT... I was looking for something to not mount my "Reserved System" of my HD (Windows partition)... and unfortunately I found this link: https://discussions.apple.com/docs/DOC-7942I did all the setups... rebooted and become the nightmareI can't boot into my SSD Mac... and try 2 other USB with diferentes Clovers and diferents types of installs... and for my surprise even these 2 USBs dont work! It stops in the same errorSo I'm very lost! I tryed to boot with inumerous flags (-x, -f, cpu=1, something about 0x3000) and nothing! I did clear CMOS, I updated de BIOS version of my board... even unpluged HD and SSD but no lucky... recently I took of my SSD and put in other Hackintosh and deleted the modifications in fstab file (about the link above) and nothing! Even deleted all the file and always stops in the same Just to remember, I'm not changed anything in my setup BIOS from the working install... only just did the commands from the link and rebooted... and I allways tur off the Virtualization and Serial Port that was allways recomendedSo can anyone give me a north?!Attached is the screens of the crashThank you guys! Link to comment https://www.insanelymac.com/forum/topic/323441-after-edit-fstab-in-terminal-stop-booting-even-with-usb-installation/ Share on other sites More sharing options...
LeBaldi Posted May 7, 2017 Author Share Posted May 7, 2017 bump Link to comment https://www.insanelymac.com/forum/topic/323441-after-edit-fstab-in-terminal-stop-booting-even-with-usb-installation/#findComment-2419112 Share on other sites More sharing options...
LeBaldi Posted May 7, 2017 Author Share Posted May 7, 2017 Well... everyone listen to that : "You never catch when you looking for" After gave up... I formated the SSD, install Windows... and I was setting up my audio card (Asus Xonar DG), and I dont know why, stopped to be recognized... so I took it off and for my surprise my VGA stopped too! I took it off to test in other slot... and again... I dont know why and how... but my system did a auto clear CMOS! So after all that... all became again to be recognized... and I thought "well... why not try again the USB?!"... tried and for my happyness all became alive! Setting all my OC and the normal Stuff in BIOS, rebooted, booted in USB, all install works perfectly and Here I am in Sierra! \o/ So... finally.. a Happy End Link to comment https://www.insanelymac.com/forum/topic/323441-after-edit-fstab-in-terminal-stop-booting-even-with-usb-installation/#findComment-2419494 Share on other sites More sharing options...
Recommended Posts