Recently Browsing 0 members
No registered users viewing this page.
Command line tool that will build a working EFI folder based on the settings in the config.plist file.
you can also copy your config.plist to the RELEASE folder and double-click OC-tool
this is the same as running
./OC-tool -uo build release from the command line
see the wiki for more info
added functionality to the -T option (update ver 1.6pt)
TUI (Text based User Interface) now has limited functionality
kexts, drivers, tools and quirks can be toggled on or off, then by pressing g an EFI folder will be created based on what you set
- BOOT/BOOTx64.efi built automatically
- OC/OpenCore.efi build automatically
- OC/ACPI folder built automatically from settings in ACPI/Add section of config.plist
- - the tool can compile .dsl to .aml on the fly if iasl is present, but I recommend compiling them to .aml yourself for the tool to move over
- OC/Drivers folder built automatically from settings in UEFI/Drivers section of config.plist
- OC/kexts folder built automatically from settings in Kernel/Add section of config.plist
- OC/Tools/Shell.efi built automatically from setings in Misc/Tools section of config.plist
- OC/vault.plist and OC/vault.sig are built automatically from the Misc/Security/RequireVault setting in config.plist
- can specify debug or release version of resources to be built
- parses plist files internally, no longer needs to call /usr/libexec/PlistBuddy which may not exist on Catalina
- kexts, drivers, tools and quirks can be enabled or disabled before building the EFI by using the -T option
Good morning everyone. I have a HP Pavillion with the following specs
I have managed to install MOjave on it, using Rehabman's config for Intel HD5500.
But I need some help with a DSDT for it.
Would anyone be kind enough to have a look at the zip file, which contains the EFI folder, a IOREG, and some screenshots from DPCI Manager,
and help me with a good DSDT patched and a correct config.plist for it?
Thank you very much. Highly appreciated
I have also included a report from Aida64 in case anyone needs it
Número do equipamento
Intel Core i7-5500U com placa gráfica Intel HD 5500 (2,4 GHz, 4 MB de cache, 2 núcleos);
SDRAM DDR3L de 4 GB a 1600 MHz (1 x 4 GB)
Placa de vídeo
NVIDIA GeForce 840M (DDR3 dedicada de 2 GB) >> disabled already using the config.plist provided
SATA 1 TB 5400 rpm
Gravador de DVD SuperMulti
HD BrightView com retroiluminação WLED de 39,6 cm (15,6 pol.) na diagonal (1366 x 768)
Placa de rede
Ethernet LAN Base-T 10/100 integrada
Conectividade sem fio
Combo 802.11b/g/n (1x1) e Bluetooth 4.0 (compatível com Miracast) >> It's not supported, but a DW1550 it's on it's way
BeatsAudio com 2 altifalantes >> it's a ALC 290
Tamanho completo tipo ilha com teclado numérico
HP Imagepad com suporte de gestos multi-toque
1 leitor de cartões multimédia SD multi-formato
1 combinação auscultadores/microfone
1 USB 2.0
2 USB 3.0
38,45 x 26,02 x 2,39 cm
Transformador de alimentação CA de 65 W
Polímero de iões de lítio 4 cél. 41 Wh
Câmara Web HP TrueVision HD (frontal) com microfone digital de matriz dupla integrado
Good morning, everyone, I'm sorry if I was wrong in choosing the topic but I need help.
I have found it extremely difficult to mount a Hackintosh in my acer.
I5 2430m 2.4 6GB RAM
Mobo P5we0 - Intel intel Graphics 3000
At the moment I have not found out what my audio codecs are.
but I'll leave the link on the motherboard.
however, my real problem is several.
I have already used the itakos image, I have already used several images that could be installed normally and that after installing the image I do not have internet via cable or wireless.
And another, I already looked in other forums and I know that I will be called a donkey in the logical question but I have not been able to install the [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] or clover to start from the Hard Disk, so I do not know what to do.At the moment I still do not know if there has already been someone who has already installed the High Sierra or just the Sierra in this notebook model and obtained permanent success.
If anyone can help me, I'll be grateful.
Installations without success, but with the system already installed in ACER;
All with the same symptom. Starting only by the bootable USB stick and without internet connection via cable and wireless.
Appreciate ! Acer 5750 Official Page
Create Custom Entries to Hide Preboot and Recovery APFS Volumes, Fusion Drive Installation with Clover ConfiguratorBy fusion71au
Create Custom Entries to Hide Preboot and Recovery APFS Volumes with Clover Configurator
With the release of High Sierra and the APFS file system, Clover users now have "extra" entries appearing in their Main Menu - Preboot and Recovery APFS volumes. While they are harmless and actually useful in certain circumstances (eg need Preboot to boot if using File Vault encryption, need Recovery to fix some file system problems), most users will likely want to hide them in day to day use.
Note: This guide is tailored to those users who want to understand how to create custom APFS entries and the "nuts and bolts" of how Clover parses the file system looking for efi loader entries. If all you want to do is hide entries, the easiest way is through the GUI/Hide section of the config.plist. This won't allow you to rename custom entries, nor unhide them with the <F3> key (at least not till Clover r4247). Pre-requisites macOS High Sierra installed on APFS SSD or HDD Clover r4097+ with apfs.efi installed in /EFI/CLOVER/drivers64UEFI or /EFI/CLOVER/drivers64 Clover Configurator v 18.104.22.168 or later Procedure 1. Record output of "diskutil list" and "diskutil apfs list" to determine the layout of the actual physical disk(s) and the synthesized APFS container. In my example, the High Sierra Volume is named macOS_HS and is installed in physical disk partition disk3s4. fusion71aus-iMac:~ fusion71au$ diskutil list /dev/disk3 (internal, physical): #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *1.0 TB disk3 1: EFI EFI 209.7 MB disk3s1 2: Microsoft Basic Data DATA 935.6 GB disk3s2 3: Microsoft Reserved 134.2 MB disk3s3 4: Apple_APFS Container disk4 63.6 GB disk3s4 5: Apple_KernelCoreDump 655.4 MB disk3s5 /dev/disk4 (synthesized): #: TYPE NAME SIZE IDENTIFIER 0: APFS Container Scheme - +63.6 GB disk4 Physical Store disk3s4 1: APFS Volume macOS_HS 34.3 GB disk4s1 2: APFS Volume Preboot 20.9 MB disk4s2 3: APFS Volume Recovery 519.6 MB disk4s3 4: APFS Volume VM 20.5 KB disk4s4 2. Generate Clover Boot Log with terminal bdmesg > ~/Documents/bootlog.txt Note: for easier analysis of boot log, please remove all Custom/Hidden Entries from config.plist/GUI first (leaving only Clover auto scanning) before generating it. 3. Open bootlog.txt with a text editor and under the [ ScanLoader ] section, note the volume numbers corresponding to the Preboot, High Sierra and Recovery APFS volumes...
Preboot Volume ---> 24 High Sierra Volume ---> 25 Recovery Volume ---> 26 4. Under [ ScanVolumes ] section, record the UUIDs of the above 3 Volumes In this example Vol 24 = Preboot: E38C70C3-C1C1-4096-B2DE-2EE2660FCE41,0x6CF46800,0x7687D88)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,050BA2A72D1D0E4D8ABDE9B99632868E Partition UUID = E38C70C3-C1C1-4096-B2DE-2EE2660FCE41 Vol UUID = 050BA2A72D1D0E4D8ABDE9B99632868E (little endian format) Vol 25 = macOS_HS: E38C70C3-C1C1-4096-B2DE-2EE2660FCE41,0x6CF46800,0x7687D88)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,67B6FC62811C594E819DACAE2F90240D Partition UUID = E38C70C3-C1C1-4096-B2DE-2EE2660FCE41 Vol UUID = 67B6FC62-811C-594E-819D-ACAE2F90240D (little endian format), 62FCB667-1C81-4E59-819D-ACAE2F90240D (big endian format) Vol 26 = Recovery: E38C70C3-C1C1-4096-B2DE-2EE2660FCE41,0x6CF46800,0x7687D88)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,F3D73FFF25C8334DAF3C183BC35433DF Partition UUID = E38C70C3-C1C1-4096-B2DE-2EE2660FCE41 Vol UUID = F3D73FFF25C8334DAF3C183BC35433DF (little endian format) Note the partition UUIDs for all the APFS volumes are the same because they are all formed from the same physical disk partition disk3s4 = E38C70C3-C1C1-4096-B2DE-2EE2660FCE41 5. Mount the APFS Volumes to determine the "path" to boot.efi for the Preboot and Recovery Volumes. In terminal: fusion71aus-iMac:~ fusion71au$ diskutil mount disk4s2 Volume Preboot on disk4s2 mounted fusion71aus-iMac:~ fusion71au$ diskutil mount disk4s3 Volume Recovery on disk4s3 mounted fusion71aus-iMac:~ fusion71au$ open /Volumes In Finder, the hidden folder /Volumes will open (or use "ShowAllFiles.app" attached)... Record the "path to boot.efi" by expanding the directory tree of Preboot and Recovery (hint: drag the icon of boot.efi to a terminal window for full path): So for Preboot Volume, path = /Volumes/Preboot/62FCB667-1C81-4E59-819D-ACAE2F90240D/System/Library/CoreServices/boot.efi --> record as \62FCB667-1C81-4E59-819D-ACAE2F90240D\System\Library\CoreServices\boot.efi and for Recovery Volume, path = /Volumes/Recovery/62FCB667-1C81-4E59-819D-ACAE2F90240D/boot.efi ---> record as \62FCB667-1C81-4E59-819D-ACAE2F90240D\boot.efi Notes Need backslashes in the path, including the leading \ The UUID in the paths to boot.efi, for both the Preboot and Recovery APFS volumes, is the same = Vol UUID of the High Sierra Volume in big endian format...
6. Open Clover Configurator, mount EFI System Partition to edit /Volumes/EFI/EFI/CLOVER/config.plist 7. Click GUI section on LHS and the + sign under Custom Entries to create New Custom Entry 8. Create Preboot High Sierra Custom Entry In Volume, copy and paste Vol UUID of Preboot Volume from step 4 In Path, copy and paste path to boot.efi from step 5, including the leading \ Click Title/FullTitle and enter the display name you want eg "Preboot High Sierra" Set Injectkexts and Hidden attributes to Yes Set Entry type to OSX Leave VolumeType blank 9. Create APFS Recovery Custom Entry In Volume, copy and paste Vol UUID of Recovery APFS Volume from step 4 In Path, copy and paste path to boot.efi from step 5, including the leading \ Click Title/FullTitle and enter the display name you want eg "APFS Recovery" Set Injectkexts and Hidden attributes to Yes Set Entry type to OSXRecovery Leave VolumeType blank 10. Save config.plist and reboot the system. At the main Clover Menu, you should see something like this ... To unhide the custom APFS entries, press the F3 key
Update: New "macOS Install Prebooter" Entry with Clover r4225+
Clover r4225+ has added new code to detect OS X installer data on the Preboot Volume ---> causes an extra entry at the Clover Main Menu: "Boot macOS Install Prebooter from Preboot"...
If you mount your Preboot volume, you will see ...
Method for hiding the new entry would be similar to hiding the Preboot Entry discussed above:
In Volume, copy and paste Vol UUID of Preboot Volume from step 4 In Path, copy and paste path to boot.efi from step 5, including the leading \ (eg \UUID\com.apple.installer\boot.efi ) Click Title/FullTitle and enter the display name you want eg "High Sierra Install Prebooter" Set Injectkexts and Hidden attributes to Yes Set Entry type to OSXInstaller Leave VolumeType blank Custom Entry for Fusion Drive Installation of Sierra or High Sierra - post#22.