Jump to content

Clover takes too longer to initialize


DroidBR
 Share

14 posts in this topic

Recommended Posts

Same problem here.

 

This is my preboot.log

 

0:100  0:100  MemLog inited, TSC freq: 2195015933

0:100  0:000  LegacyRegion2: Chipset/proc: 0x01048086

0:100  0:000   Next Generation Core processors (PAM 0x80-0x86)

0:100  0:000   Test PAM1=(0x41=90, 0x5a=00, 0x81=11, 0x91=00) at chipset 01048086

0:100  0:000  , Install = Success

0:128  0:028  VGA Pci.Hdr.Command=0 - not enabled

0:128  0:000  BiosVideoDriverBindingStart!

0:128  0:000  BiosVideoCheckForVbe

0:128  0:000  EdidOverride not found

0:140  0:012   Edid1+

0:140  0:000   found Detail Timing 1600x900

0:140  0:000  timing string after 0xFE:AUO

        

0:140  0:000  timing string after 0xFE:B173RW01 V3

0:152  0:012   Edid0+

0:152  0:000   found Detail Timing 1600x900

0:152  0:000  ... already present

0:152  0:000  timing string after 0xFE:AUO

        

0:152  0:000  timing string after 0xFE:B173RW01 V3

 

0:153  0:000     0 1024x768 attr=9B - ok, edid-, 1024x768, working, highest, pref=0

0:153  0:000     1 640x480 attr=9B - ok, edid-, 640x480, working

0:153  0:000     2 800x600 attr=9B - ok, edid-, 800x600, working

0:154  0:000  BV new mode: 0 1024x768

0:278  0:123   SetMode pref 0 (0) = Success

0:318  0:040  VGA Pci.Hdr.Command=0 - not enabled

0:496  0:177  VGA Pci.Hdr.Command=0 - not enabled

0:505  0:009  VGA Pci.Hdr.Command=0 - not enabled

2:988  2:482  VGA Pci.Hdr.Command=0 - not enabled

3:156  0:167 

3:156  0:000  Now is 18.10.2014,  18:51:9 (GMT+2047)

3:156  0:000  Starting Clover rev 2939 on CLOVER EFI

3:156  0:000  SelfDevicePath=PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,37497720-5D35-4251-9E68-6E13FA9B8DFB,0x28,0x64000) @9B625598

3:156  0:000  SelfDirPath = \EFI\CLOVER

3:156  0:000  UnicodeCollation Status=Success

3:156  0:000  Total Memory Slots Count = 2

3:156  0:000  Type 17 Index = 0

3:156  0:000  Table has error information, checking

3:156  0:000  Found memory information in table 18/0, type=0x3, operation=0x2 syndrome=0x0

3:156  0:000  ...memory OK

3:156  0:000  SmbiosTable.Type17->Speed = 1333

3:156  0:000  SmbiosTable.Type17->Size = 4096

3:156  0:000  Type 17 Index = 1

3:156  0:000  Table has error information, checking

3:156  0:000  Found memory information in table 18/1, type=0x3, operation=0x2 syndrome=0x0

3:156  0:000  ...memory OK

3:156  0:000  SmbiosTable.Type17->Speed = 1333

3:156  0:000  SmbiosTable.Type17->Size = 4096

3:156  0:000  Boot status=0

3:156  0:000  Clover revision: 2939  running on HP Pavilion dv7 Notebook PC

3:156  0:000  ... with board 1800

3:156  0:000  Clover load options size = 0 bytes

3:170  0:013  Using OEM config.plist at path: EFI\CLOVER\config.plist

3:171  0:000  EFI\CLOVER\config.plist loaded: Success

3:175  0:004  Found theme iclover

3:184  0:009  Loading early settings

3:184  0:000  timeout set to 5

3:184  0:000  Custom boot CUSTOM_BOOT_DISABLED (0x0)

3:630  0:446  KextsToPatch: 1 requested

3:835  0:205  KextToPatch 0: AppleAHCIPort (External icons patch) Kext bin patch, data len: 8

4:656  0:820  Default theme: iclover

4:858  0:202  Hiding entries with string \EFI\BOOT\BOOTX64.EFI

5:061  0:202  Hiding entries with string Windows

5:264  0:202  LoadDrivers() start

5:479  0:215  Loading FSInject-64.efi

5:700  0:221  Loading HFSPlus.efi

5:910  0:209   - driver needs connecting

6:116  0:206  1 drivers needs connecting ...

6:324  0:207  PlatformDriverOverrideProtocol not found. Installing ... Success

6:944  0:619  VGA Pci.Hdr.Command=0 - not enabled

7:634  0:690  LoadDrivers() end

8:042  0:407  Console modes reported: 4, available modes:

8:463  0:420    Mode 1: 80x25

8:884  0:421    Mode 3: 100x31

9:305  0:420    Mode 4: 128x40 (current mode)

9:725  0:420  SetScreenResolution: 1024x768 - already set

10:532  0:806  reinit: self device path=PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,37497720-5D35-4251-9E68-6E13FA9B8DFB,0x28,0x64000)

10:949  0:417  new SelfHandle=9B625598

11:367  0:417  CPU Vendor = 756E6547 Model=206A7

11:772  0:404  The CPU supported turbo

12:177  0:404  BrandString = Intel® Core i7-2670QM CPU @ 2.20GHz

12:581  0:404  MSR 0xE2 before patch 1E008404

12:986  0:404  MSR 0xE2 is locked, PM patches will be turned on

13:391  0:404  MSR 0xE4              00020414

13:795  0:404  MSR 0xCE              00000800_60011600

14:200  0:404  non-usable FLEX_RATIO = 1FF00

14:604  0:404  MSR 0x1B0             00000000

15:009  0:404  FSBFrequency=100MHz DMIvalue=1333330kHz

15:414  0:404  Corrected FSBFrequency=100MHz

15:818  0:404  Vendor/Model/Stepping: 0x756E6547/0x2A/0x7

16:223  0:404  Family/ExtFamily: 0x6/0x0

16:628  0:404  MaxDiv/MinDiv: 22.0/8

17:032  0:404  Turbo: 28/28/30/31

17:437  0:404  Features: 0xBFEBFBFF

17:842  0:404  Threads: 8

18:247  0:404  Cores: 4

18:652  0:404  FSB: 100 MHz

19:056  0:404  CPU: 2200 MHz

19:461  0:404  TSC: 2200 MHz

19:865  0:404  PIS: 400 MHz

20:270  0:404  PCI (00|00:00.00) : 8086 0104 class=060000

20:673  0:402  PCI (00|00:01.00) : 8086 0101 class=060400

21:076  0:403  PCI (00|01:00.00) : 1002 6760 class=030000

21:479  0:403  Found Radeon model=AMD Radeon HD 6470M Series

21:882  0:403  PCI (00|00:02.00) : 8086 0116 class=030000

22:285  0:402  Found GFX model=Intel HD Graphics 3000

22:688  0:403  PCI (00|00:16.00) : 8086 1C3A class=078000

23:091  0:403  PCI (00|00:1A.00) : 8086 1C2D class=0C0320

23:495  0:403  PCI (00|00:1B.00) : 8086 1C20 class=040300

23:897  0:402  PCI (00|00:1C.00) : 8086 1C10 class=060400

24:301  0:403  PCI (00|07:00.00) : 10EC 8168 class=020000

24:705  0:404  PCI (00|00:1C.01) : 8086 1C12 class=060400

25:108  0:402  PCI (00|0D:00.00) : 14E4 4727 class=028000

25:511  0:402  PCI (00|00:1C.02) : 8086 1C14 class=060400

25:914  0:403  PCI (00|13:00.00) : 10EC 5209 class=FF0000

26:317  0:403  PCI (00|13:00.01) : 10EC 5209 class=080500

26:720  0:402  PCI (00|00:1C.03) : 8086 1C16 class=060400

27:123  0:403  PCI (00|19:00.00) : 1033 0194 class=0C0330

27:526  0:403  PCI (00|00:1D.00) : 8086 1C26 class=0C0320

27:929  0:402  PCI (00|00:1F.00) : 8086 1C49 class=060100

28:332  0:402  PCI (00|00:1F.02) : 8086 1C03 class=010601

28:735  0:402  PCI (00|00:1F.03) : 8086 1C22 class=0C0500

29:138  0:403  ScanSPD() start

29:546  0:407  SMBus CmdReg: 0x3

29:964  0:418  Scanning SMBus [8086:1C22], mmio: 0xC7506004, ioport: 0x6040, hostc: 0x1

30:397  0:433  SPD[0]: Type 11 @0x50

30:825  0:427  DDR speed 1600MHz

31:243  0:418  Slot: 0 Type 24 4096MB 1600MHz Vendor=Samsung PartNo=M471B5273DH0-CK0 SerialNo=00000B070F0A0B04

31:683  0:439  SPD[2]: Type 11 @0x52

32:110  0:426  DDR speed 1333MHz

32:528  0:418  Slot: 2 Type 24 4096MB 1333MHz Vendor=Samsung PartNo=M471B5273DH0-CH9 SerialNo=090506060A000000

33:039  0:511  SPD[16]: Type 63 @0x60

33:500  0:460  ScanSPD() end

33:908  0:407  Get Acpi Tables List from RSDT:

34:515  0:607   Found table: FACP  SLIC-MPC len=244

34:920  0:404   Found table: ASF!  INSYDE   len=165

35:325  0:404   Found table: HPET  INSYDE   len=56

35:729  0:404   Found table: APIC  INSYDE   len=140

36:134  0:404   Found table: MCFG  INSYDE   len=60

36:539  0:404   Found table: SLIC  SLIC-MPC len=374

36:944  0:404   Found table: SSDT  INSYDE   len=1311

37:349  0:404   Found table: BOOT  INSYDE   len=40

37:753  0:404   Found table: ASPT  INSYDE   len=52

38:158  0:405   Found table: SSDT  INSYDE   len=2382

38:563  0:404   Found table: SSDT  INSYDE   len=2454

38:967  0:404   Found table: SSDT  INSYDE   len=730

39:372  0:404   Found table: SSDT  INSYDE   len=861

39:777  0:404   Found table: SSDT  INSYDE   len=9377

40:182  0:404  Calibrated TSC frequency =2195015933 =2195MHz

40:588  0:406  Loading main settings

40:996  0:407  USB FixOwnership: true

41:404  0:408  Dropping 3 tables

41:811  0:407  Drop table 0 signature="SSDT" (54445353) table-id="CpuPm" (0000006D50757043)

47:517  5:705  set table: 54445353,       6D50757043 to drop:

48:332  0:814  Drop table 1 signature="DMAR" (52414D44)

51:594  3:261  set table: 52414D44,                0 to drop:

52:409  0:815  Drop table 2 signature="SSDT" (54445353) table-id="Cpu0Ist" (0074734930757043)

59:339  6:929  set table: 54445353,   74734930757043 to drop:

60:154  0:815  Config set Fixes will override FixMask mask!

60:562  0:407     final mask=10024004

60:969  0:407  Config set ChassisType=0x8

61:376  0:406  Error in Second part of settings0: Not Found

61:787  0:410  Oem smbios.plist not found at path: EFI\CLOVER\smbios.plist

62:198  0:411  smbios.plist not found, not overriding config.plist

62:605  0:406  found 10 volumes with blockIO

63:009  0:403   0. Volume:

63:413  0:403    PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)

63:820  0:407    Result of bootcode detection: bootable <null string> (<null string>)

64:232  0:412    Volume 'Whole Disc Boot', LegacyOS '', LegacyIcon(s) 'legacy', GUID = <null guid>

64:636  0:403   1. Volume:

65:040  0:403    PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0x0,0x0)

65:783  0:743    Result of bootcode detection: bootable <null string> (<null string>)

66:196  0:412    Volume 'Whole Disc Boot', LegacyOS '', LegacyIcon(s) 'legacy', GUID = <null guid>

66:600  0:404   2. Volume:

67:004  0:403    PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x5,0x0,0x0)

67:407  0:403    found optical drive

67:811  0:404    Volume 'Whole Disc Boot', LegacyOS '', LegacyIcon(s) 'legacy', GUID = <null guid>

68:215  0:403   3. Volume:

68:620  0:404    PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,37497720-5D35-4251-9E68-6E13FA9B8DFB,0x28,0x64000)

69:027  0:407    Result of bootcode detection: bootable Clover (clover)

69:439  0:411    Volume 'EFI', LegacyOS 'Clover', LegacyIcon(s) 'clover', GUID = 37497720-5D35-4251-9E68-6E13FA9B8DFB

69:843  0:403    This is SelfVolume !!

70:247  0:403   4. Volume:

70:651  0:404    PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,9BEB0AB9-4439-4DB2-87AA-634F7B32CB27,0x64028,0x573AC780)

71:059  0:407    Volume 'OSX', LegacyOS '', LegacyIcon(s) '<null string>', GUID = 9BEB0AB9-4439-4DB2-87AA-634F7B32CB27

71:463  0:404   5. Volume:

71:867  0:404    PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(3,GPT,83B8D30E-BB96-4F62-8303-562AF57256BF,0x574107A8,0x135F20)

72:275  0:407    Volume 'Recovery HD', LegacyOS '', LegacyIcon(s) '<null string>', GUID = 83B8D30E-BB96-4F62-8303-562AF57256BF

72:679  0:403   6. Volume:

73:083  0:404    PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0x0,0x0)\HD(1,MBR,0xF38A2093,0x800,0x63800)

73:491  0:407    Result of bootcode detection: bootable Windows (vista,win)

73:903  0:411    Volume 'Legacy HD1', LegacyOS 'Windows', LegacyIcon(s) 'vista,win', GUID = <null guid>

74:307  0:404   7. Volume:

74:711  0:404    PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0x0,0x0)\HD(2,MBR,0xF38A2093,0x64000,0x38024800)

75:118  0:407    Result of bootcode detection: bootable Windows (vista,win)

75:530  0:411    Volume 'Legacy HD2', LegacyOS 'Windows', LegacyIcon(s) 'vista,win', GUID = <null guid>

75:934  0:403   8. Volume:

76:338  0:403    PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0x0,0x0)\HD(3,MBR,0xF38A2093,0x38088800,0x22C9800)

76:745  0:407    Result of bootcode detection: bootable Windows (vista,win)

77:157  0:411    Volume 'Legacy HD3', LegacyOS 'Windows', LegacyIcon(s) 'vista,win', GUID = <null guid>

77:561  0:403   9. Volume:

77:965  0:404    PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0x0,0x0)\HD(4,MBR,0xF38A2093,0x3A352000,0x33830)

78:393  0:427    Result of bootcode detection: bootable Windows (vista,win)

78:844  0:451    Volume 'HP_TOOLS', LegacyOS 'Windows', LegacyIcon(s) 'vista,win', GUID = <null guid>

79:249  0:404  Searching volumes for latest nvram.plist ...

80:086  0:837    3. Volume 'EFI', GUID = 37497720-5D35-4251-9E68-6E13FA9B8DFB - no nvram.plist - skipping!

80:928  0:842    4. Volume 'OSX', GUID = 9BEB0AB9-4439-4DB2-87AA-634F7B32CB27 - no nvram.plist - skipping!

81:766  0:838    5. Volume 'Recovery HD', GUID = 83B8D30E-BB96-4F62-8303-562AF57256BF - no nvram.plist - skipping!

82:603  0:837    9. Volume 'HP_TOOLS', GUID = <null guid> - not GPT - no nvram.plist - skipping!

83:859  1:256   nvram.plist not found!

84:278  0:418  PutNvramPlistToRtVars: nvram.plist not found

84:698  0:420  Invalidating BuiltinIcons...

85:106  0:407  Using theme 'iclover' (EFI\CLOVER\themes\iclover)

85:518  0:412  font WoB_Hellfire_Bold_9W.png loaded from themedir

85:937  0:418  Font loaded: ImageWidth=176 ImageHeight=288

86:356  0:418  Font 2 prepared WxH=11x18 CharWidth=10

86:764  0:407  Choosing theme iclover

87:171  0:407  Custom legacy start

87:588  0:416  Custom legacy end

87:995  0:406  Scanning legacy ...

88:410  0:415   0: 'Whole Disc Boot' (legacy) not legacy

89:241  0:830   1: 'Whole Disc Boot' (legacy) not legacy

90:071  0:829   2: 'Whole Disc Boot' (legacy) not legacy

90:900  0:829   3: 'EFI' (clover) add legacy

91:757  0:856   added 'Boot Clover from EFI' OSType=3 Icon=clover

92:161  0:404   4: 'OSX' (<null string>) not legacy

92:991  0:829   5: 'Recovery HD' (<null string>) not legacy

93:821  0:829   6: 'Legacy HD1' (vista,win) add legacy

94:660  0:838   added 'Boot Windows from Legacy HD1' OSType=2 Icon=vista,win

95:064  0:404   7: 'Legacy HD2' (vista,win) add legacy

95:898  0:834   added 'Boot Windows from Legacy HD2' OSType=2 Icon=vista,win

96:302  0:404   8: 'Legacy HD3' (vista,win) add legacy

97:137  0:834   added 'Boot Windows from Legacy HD3' OSType=2 Icon=vista,win

97:541  0:404   9: 'HP_TOOLS' (vista,win) add legacy

98:374  0:833   added 'Boot Windows from HP_TOOLS' OSType=2 Icon=vista,win

98:778  0:404  Custom entries start

99:187  0:408  Custom entries finish

99:594  0:407  Scanning loaders...

100:015  0:421   0: 'Whole Disc Boot' no file system

100:858  0:842   1: 'Whole Disc Boot' no file system

101:701  0:842   2: 'Whole Disc Boot' no file system

102:544  0:842   3: 'EFI'

103:481  0:937    hiding entry: \EFI\BOOT\BOOTX64.efi

103:906  0:424   4: 'OSX'

104:775  0:868  Check if volume Is Hibernated:

105:175  0:400  Check sleep image 'by signature':

105:607  0:431  read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Not Found

106:017  0:410  using default sleep image name = \private\var\vm\sleepimage

106:440  0:422  Reading first 512 bytes of sleepimage ...

106:970  0:530   OurBlockIoRead: Lba=1C2A390, Offset=385472000 (BlockSize=512)

107:438  0:468   sig lion: 7A7A7A7A

107:848  0:409   sig snow: 0

108:256  0:408   no valid sleep image offset was found

108:666  0:409  Reading completed -> Success

109:078  0:412   sleepimage offset could not be acquired

109:491  0:412   hibernated: no - sign

109:916  0:424      Loader entry created for 'PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,9BEB0AB9-4439-4DB2-87AA-634F7B32CB27,0x64028,0x573AC780)\System\Library\CoreServices\boot.efi'

110:384  0:468   5: 'Recovery HD'

111:249  0:864      Loader entry created for 'PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(3,GPT,83B8D30E-BB96-4F62-8303-562AF57256BF,0x574107A8,0x135F20)\com.apple.recovery.boot\boot.efi'

111:714  0:465   6: 'Legacy HD1' no file system

112:561  0:846   7: 'Legacy HD2' no file system

113:407  0:845   8: 'Legacy HD3' no file system

114:254  0:846   9: 'HP_TOOLS'

115:149  0:894  Custom tool start

115:559  0:410  Custom tool end

115:974  0:415  found tool \EFI\CLOVER\tools\Shell64.efi

116:404  0:429  GetEfiBootDeviceFromNvram: efi-boot-device-data not found

117:247  0:843  EfiBootVolume not found

117:671  0:423  Searching for DefaultVolume 'SYSTEM' ...

118:080  0:409  Default boot entry not found

118:491  0:410  DefaultIndex=-1 and MainMenu.EntryCount=12

118:900  0:409  Use anime=iClover_logo frames=4

119:339  0:438   found 4 frames of the anime

119:907  0:568  Found Mouse device:

120:329  0:422  GUI ready

Link to comment
Share on other sites

@DroidBR: that last comment was for antodev, not you. I’m waiting for your boot or preboot log. For preboot to be saved the EFI partition must be FAT32, and for boot.log you need to install Clover to the main partition, otherwise the “bdmesg” command won’t work.

Link to comment
Share on other sites

My boot time was also lengthened since upgrading to 10.10. I “solved” it by disabling the internal GPU, which obviously only works if you have a discrete GPU.

 

Maybe, alternatively, try using different framebuffers for the iGPU and/or editing your SSDT.

Link to comment
Share on other sites

My preboot.log:

0:100  0:100  MemLog inited, TSC freq: 2699998152
0:100  0:000  LegacyRegion2: Chipset/proc: 0x29C08086
0:100  0:000   Intel Series 4 and similar (PAM 0x90-0x96)
0:100  0:000   Test PAM1=(0x41=90, 0x5a=00, 0x81=00, 0x91=11) at chipset 29C08086
0:100  0:000  , Install = Success
0:122  0:022  BiosVideoDriverBindingStart!
0:122  0:000  BiosVideoCheckForVbe
0:122  0:000  EdidOverride not found
0:277  0:155   Edid1-
0:432  0:154   Edid0-
0:481  0:049     0 640x480 attr=3BF - ok, 640x480, working, highest, pref=0
0:483  0:001     1 800x600 attr=3BF - ok, 800x600, working, highest, pref=1
0:485  0:001     2 1024x768 attr=3BF - ok, 1024x768, working, highest, pref=2
0:496  0:011     3 1360x768 attr=3BF - ok
0:496  0:000  BV new mode: 2 1024x768
0:851  0:355   SetMode pref 2 (2) = Success
29:435  28:583  
29:435  0:000  Now is 19.10.2014,  10:53:17 (GMT+2047)
29:435  0:000  Starting Clover rev 2953 on CLOVER EFI
29:435  0:000  SelfDevicePath=PcieRoot(0x0)\Pci(0x1D,0x7)\USB(0x6,0x0)\HD(1,GPT,2E31BEAC-942A-49C9-9EEF-59FC0C0E9157,0x28,0x64000) @CE860B98
29:435  0:000  SelfDirPath = \EFI\CLOVER
29:435  0:000  Total Memory Slots Count = 2
29:435  0:000  Type 17 Index = 0
29:435  0:000  Ignoring insane frequency value 0MHz
29:435  0:000  SmbiosTable.Type17->Speed = 0
29:435  0:000  SmbiosTable.Type17->Size = 2048
29:435  0:000  Type 17 Index = 1
29:435  0:000  Ignoring insane frequency value 0MHz
29:435  0:000  SmbiosTable.Type17->Speed = 0
29:435  0:000  SmbiosTable.Type17->Size = 2048
29:435  0:000  Boot status=0
29:435  0:000  Clover revision: 2953  running on STI
29:435  0:000  ... with board STI 005492
29:435  0:000  Clover load options size = 0 bytes
29:435  0:000  Using OEM config.plist at path: EFI\CLOVER\config.plist
29:436  0:000  EFI\CLOVER\config.plist loaded: Success
29:451  0:014  Found theme BGM
29:521  0:070  Loading early settings
29:521  0:000  Custom boot CUSTOM_BOOT_DISABLED (0x0)
29:521  0:000  Default theme: BGM
29:521  0:000  LoadDrivers() start
29:561  0:040  Loading FSInject-64.efi
29:561  0:000  LoadDrivers() end
29:561  0:000  Console modes reported: 4, available modes:
29:561  0:000    Mode 1: 80x25
29:562  0:000    Mode 3: 100x31
29:562  0:000    Mode 4: 128x40 (current mode)
29:562  0:000  SetScreenResolution: 1024x768 - already set
29:562  0:000  reinit: self device path=PcieRoot(0x0)\Pci(0x1D,0x7)\USB(0x6,0x0)\HD(1,GPT,2E31BEAC-942A-49C9-9EEF-59FC0C0E9157,0x28,0x64000)
29:562  0:000  new SelfHandle=CE860B98
29:562  0:000  CPU Vendor = 756E6547 Model=1067A
29:562  0:000  The CPU not supported turbo
29:562  0:000  BrandString = Pentium® Dual-Core  CPU      E5400  @ 2.70GHz
29:562  0:000  MSR dumps:
29:562  0:000   @0x00CD=80000802
29:562  0:000   @0x0198=6164D2406004D24
29:562  0:000  FSBFrequency=200MHz DMIvalue=200000kHz
29:562  0:000  Corrected FSBFrequency=200MHz
29:562  0:000  Vendor/Model/Stepping: 0x756E6547/0x17/0xA
29:562  0:000  Family/ExtFamily: 0x6/0x0
29:562  0:000  MaxDiv/MinDiv: 13.5/6
29:562  0:000  Turbo: 14/0/0/0
29:562  0:000  Features: 0xBFEBFBFF
29:562  0:000  Threads: 2
29:562  0:000  Cores: 1
29:562  0:000  FSB: 200 MHz
29:562  0:000  CPU: 2700 MHz
29:562  0:000  TSC: 2700 MHz
29:562  0:000  PIS: 800 MHz
29:562  0:000  PCI (00|00:00.00) : 8086 29C0 class=060000
29:562  0:000  PCI (00|00:01.00) : 8086 29C1 class=060400
29:562  0:000  PCI (00|04:00.00) : 10DE 1040 class=030000
29:562  0:000  Found NVidia model=EVGA GeForce GT 520
29:562  0:000  PCI (00|04:00.01) : 10DE 0E08 class=040300
29:562  0:000  PCI (00|00:1B.00) : 8086 27D8 class=040300
29:562  0:000  PCI (00|00:1C.00) : 8086 27D0 class=060400
29:562  0:000  PCI (00|00:1C.01) : 8086 27D2 class=060400
29:562  0:000  PCI (00|02:00.00) : 10EC 8168 class=020000
29:562  0:000  PCI (00|00:1D.00) : 8086 27C8 class=0C0300
29:562  0:000  PCI (00|00:1D.01) : 8086 27C9 class=0C0300
29:562  0:000  PCI (00|00:1D.02) : 8086 27CA class=0C0300
29:562  0:000  PCI (00|00:1D.03) : 8086 27CB class=0C0300
29:562  0:000  PCI (00|00:1D.07) : 8086 27CC class=0C0320
29:562  0:000  PCI (00|00:1E.00) : 8086 244E class=060401
29:562  0:000  PCI (00|00:1F.00) : 8086 27B8 class=060100
29:562  0:000  PCI (00|00:1F.01) : 8086 27DF class=01018A
29:562  0:000  PCI (00|00:1F.02) : 8086 27C0 class=01018F
29:562  0:000  PCI (00|00:1F.03) : 8086 27DA class=0C0500
29:562  0:000  ScanSPD() start
29:562  0:000  SMBus CmdReg: 0x1
29:562  0:000  Scanning SMBus [8086:27DA], mmio: 0x0, ioport: 0x400, hostc: 0x1
29:679  0:116  SPD[0]: Type 8 @0x50 
29:755  0:076  DDR speed 800MHz 
29:755  0:000  Slot: 0 Type 19 2048MB 800MHz Vendor=Transcend Information PartNo=JM800QLU-2G SerialNo=0F0F0F0F0F0F0F0F 
29:877  0:122  SPD[2]: Type 8 @0x52 
29:902  0:025  DDR speed 800MHz 
29:902  0:000  Slot: 2 Type 19 2048MB 800MHz Vendor=Kingston PartNo=King SerialNo=000B000A0B000D02 
30:029  0:126  ScanSPD() end
30:029  0:000  Get Acpi Tables List from RSDT:
30:029  0:000   Found table: FACP  FACP1602 len=132
30:029  0:000   Found table: APIC  APIC1602 len=108
30:029  0:000   Found table: MCFG  OEMMCFG  len=60
30:029  0:000   Found table: SLIC  sempinfo len=374
30:029  0:000   Found table: OEMB  OEMB1602 len=114
30:029  0:000   Found table: GSCI  GMCHSCI  len=8228
30:029  0:000   Found table: SSDT  CpuPm len=2684
30:029  0:000  Calibrated TSC frequency =2699998152 =2699MHz
30:029  0:000  Loading main settings
30:029  0:000  Error in Second part of settings0: Not Found
30:029  0:000  Oem smbios.plist not found at path: EFI\CLOVER\smbios.plist
30:029  0:000  smbios.plist not found, not overriding config.plist
30:029  0:000  found 9 volumes with blockIO
30:029  0:000   0. Volume:
30:029  0:000    PcieRoot(0x0)\Pci(0x1D,0x7)\USB(0x4,0x0)\Unit(0x0)
30:029  0:000    USB volume
30:029  0:000    Volume 'Whole Disc Boot', LegacyOS '', LegacyIcon(s) 'legacy', GUID = <null guid>
30:029  0:000   1. Volume:
30:029  0:000    PcieRoot(0x0)\Pci(0x1D,0x7)\USB(0x4,0x0)\Unit(0x1)
30:029  0:000    USB volume
30:029  0:000    Volume 'Whole Disc Boot', LegacyOS '', LegacyIcon(s) 'legacy', GUID = <null guid>
30:029  0:000   2. Volume:
30:029  0:000    PcieRoot(0x0)\Pci(0x1D,0x7)\USB(0x6,0x0)
30:041  0:011    Result of bootcode detection: bootable <null string> (<null string>)
30:041  0:000    USB volume
30:041  0:000    Volume 'Whole Disc Boot', LegacyOS '', LegacyIcon(s) 'legacy', GUID = <null guid>
30:041  0:000   3. Volume:
30:041  0:000    PcieRoot(0x0)\Pci(0x1D,0x7)\USB(0x6,0x0)\HD(1,GPT,2E31BEAC-942A-49C9-9EEF-59FC0C0E9157,0x28,0x64000)
30:052  0:011    Result of bootcode detection: bootable Clover (clover)
30:052  0:000    USB volume
30:052  0:000    Volume 'EFI', LegacyOS 'Clover', LegacyIcon(s) 'clover', GUID = 2E31BEAC-942A-49C9-9EEF-59FC0C0E9157
30:052  0:000    This is SelfVolume !!
30:052  0:000   4. Volume:
30:052  0:000    PcieRoot(0x0)\Pci(0x1D,0x7)\USB(0x6,0x0)\HD(2,GPT,18569132-C0F0-40E9-9408-C627202DAF02,0x64028,0xCB5F58)
30:064  0:011    USB volume
30:064  0:000    Volume 'OS X Install USB', LegacyOS '', LegacyIcon(s) '<null string>', GUID = 18569132-C0F0-40E9-9408-C627202DAF02
30:064  0:000   5. Volume:
30:064  0:000    PcieRoot(0x0)\Pci(0x1F,0x2)\Ata(0x0)
30:076  0:012    Result of bootcode detection: bootable <null string> (<null string>)
30:076  0:000    Volume 'Whole Disc Boot', LegacyOS '', LegacyIcon(s) 'legacy', GUID = <null guid>
30:076  0:000   6. Volume:
30:076  0:000    PcieRoot(0x0)\Pci(0x1F,0x2)\Ata(0x0)\HD(1,MBR,0xB89A1ABD,0x800,0xAF000)
30:089  0:012    Result of bootcode detection: bootable Windows (vista,win)
30:089  0:000    Volume 'Legacy HD1', LegacyOS 'Windows', LegacyIcon(s) 'vista,win', GUID = <null guid>
30:089  0:000   7. Volume:
30:089  0:000    PcieRoot(0x0)\Pci(0x1F,0x2)\Ata(0x0)\HD(2,MBR,0xB89A1ABD,0xAF800,0x1E247800)
30:102  0:012    Result of bootcode detection: bootable Windows (vista,win)
30:102  0:000    Volume 'Legacy HD2', LegacyOS 'Windows', LegacyIcon(s) 'vista,win', GUID = <null guid>
30:102  0:000   8. Volume:
30:102  0:000    PcieRoot(0x0)\Pci(0x1F,0x2)\Ata(0x0)\HD(3,MBR,0xB89A1ABD,0x1E2F7000,0x7136800)
30:115  0:012    Result of bootcode detection: bootable <null string> (<null string>)
30:115  0:000    Volume 'OSX', LegacyOS '', LegacyIcon(s) '<null string>', GUID = <null guid>
30:115  0:000  Searching volumes for latest nvram.plist ...
30:115  0:000    3. Volume 'EFI', GUID = 2E31BEAC-942A-49C9-9EEF-59FC0C0E9157 - no nvram.plist - skipping!
30:115  0:000    4. Volume 'OS X Install USB', GUID = 18569132-C0F0-40E9-9408-C627202DAF02 - no nvram.plist - skipping!
30:115  0:000    8. Volume 'OSX', GUID = <null guid> - not GPT - no nvram.plist - skipping!
30:135  0:020   nvram.plist not found!
30:135  0:000  PutNvramPlistToRtVars: nvram.plist not found
30:135  0:000  Invalidating BuiltinIcons...
30:136  0:000  Using theme 'BGM' (EFI\CLOVER\themes\BGM)
30:136  0:000  OS main and drive as badge
30:145  0:008  font GoB_PTMono_10W_Bevel3.png loaded from themedir
30:145  0:000  Font loaded: ImageWidth=176 ImageHeight=288
30:145  0:000  Font 2 prepared WxH=11x18 CharWidth=10
30:145  0:000  Choosing theme BGM
30:145  0:000  Custom entries start
30:145  0:000  Custom entry 0 skipped because it is hidden.
30:145  0:000  Custom entries finish
30:145  0:000  Scanning loaders...
30:145  0:000   0: 'Whole Disc Boot' no file system
30:145  0:000   1: 'Whole Disc Boot' no file system
30:145  0:000   2: 'Whole Disc Boot' no file system
30:145  0:000   3: 'EFI'
30:369  0:223      Skipped because matching custom entry 0!
30:369  0:000   4: 'OS X Install USB'
30:381  0:012      Not match custom entry 0: Path: not match, Type: not match
30:431  0:050  Check if volume Is Hibernated:
30:431  0:000  Check sleep image 'by signature':
30:478  0:046  read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Not Found
30:478  0:000  using default sleep image name = \private\var\vm\sleepimage
30:536  0:058   sleepimage not found -> Not Found
30:536  0:000   hibernated: no - sign
30:570  0:034      Loader entry created for 'PcieRoot(0x0)\Pci(0x1D,0x7)\USB(0x6,0x0)\HD(2,GPT,18569132-C0F0-40E9-9408-C627202DAF02,0x64028,0xCB5F58)\System\Library\CoreServices\boot.efi'
30:640  0:069   5: 'Whole Disc Boot' no file system
30:640  0:000   6: 'Legacy HD1' no file system
30:640  0:000   7: 'Legacy HD2' no file system
30:640  0:000   8: 'OSX'
30:670  0:030      Not match custom entry 0: Path: not match, Type: not match
30:743  0:072  Check if volume Is Hibernated:
30:743  0:000  Check sleep image 'by signature':
30:832  0:089  read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Not Found
30:832  0:000  using default sleep image name = \private\var\vm\sleepimage
30:878  0:046   sleepimage not found -> Not Found
30:878  0:000   hibernated: no - sign
30:930  0:052    Icon 17 (icons\vol_internal_hfs.icns) not found
30:930  0:000    Theme path EFI\CLOVER\themes\BGM, ThemeDir=CE28BE20
30:934  0:003      Loader entry created for 'PcieRoot(0x0)\Pci(0x1F,0x2)\Ata(0x0)\HD(3,MBR,0xB89A1ABD,0x1E2F7000,0x7136800)\System\Library\CoreServices\boot.efi'
31:047  0:113      Skipped because matching custom entry 0!
31:047  0:000  Custom legacy start
31:047  0:000  Custom legacy end
31:047  0:000  Scanning legacy ...
31:047  0:000   0: 'Whole Disc Boot' (legacy) not legacy
31:047  0:000   1: 'Whole Disc Boot' (legacy) not legacy
31:047  0:000   2: 'Whole Disc Boot' (legacy) not legacy
31:047  0:000   3: 'EFI' (clover) add legacy
31:051  0:003   added 'Boot Clover from EFI' OSType=3 Icon=clover
31:051  0:000   4: 'OS X Install USB' (<null string>) not legacy
31:051  0:000   5: 'Whole Disc Boot' (legacy) not legacy
31:051  0:000   6: 'Legacy HD1' (vista,win) add legacy
31:057  0:006   added 'Boot Windows from Legacy HD1' OSType=2 Icon=vista,win
31:057  0:000   7: 'Legacy HD2' (vista,win) add legacy
31:061  0:003   added 'Boot Windows from Legacy HD2' OSType=2 Icon=vista,win
31:061  0:000   8: 'OSX' (<null string>) not legacy
31:061  0:000  Custom tool start
31:061  0:000  Custom tool end
31:061  0:000  found tool \EFI\CLOVER\tools\Shell64.efi
31:061  0:000  Checking EFI partition Volume 3 for Clover
31:061  0:000   Found Clover
31:062  0:000  Use anime=Anim_9_Boot_Sequence frames=64
31:065  0:002  GetEfiBootDeviceFromNvram: efi-boot-device-data not found
31:065  0:000  EfiBootVolume not found
31:065  0:000  Default boot entry not found
31:065  0:000  DefaultIndex=-1 and MainMenu.EntryCount=11
31:065  0:000  Use anime=Anim_1_Logo frames=49
31:718  0:653   found 49 frames of the anime
32:156  0:437  Found Mouse device:
32:156  0:000  GUI ready
Link to comment
Share on other sites

Same problem here.

 

This is my preboot.log

 

0:100  0:100  MemLog inited, TSC freq: 2195015933

0:100  0:000  LegacyRegion2: Chipset/proc: 0x01048086

0:100  0:000   Next Generation Core processors (PAM 0x80-0x86)

0:100  0:000   Test PAM1=(0x41=90, 0x5a=00, 0x81=11, 0x91=00) at chipset 01048086

0:100  0:000  , Install = Success

0:128  0:028  VGA Pci.Hdr.Command=0 - not enabled

0:128  0:000  BiosVideoDriverBindingStart!

0:128  0:000  BiosVideoCheckForVbe

0:128  0:000  EdidOverride not found

0:140  0:012   Edid1+

0:140  0:000   found Detail Timing 1600x900

0:140  0:000  timing string after 0xFE:AUO

        

0:140  0:000  timing string after 0xFE:B173RW01 V3

0:152  0:012   Edid0+

0:152  0:000   found Detail Timing 1600x900

0:152  0:000  ... already present

0:152  0:000  timing string after 0xFE:AUO

        

0:152  0:000  timing string after 0xFE:B173RW01 V3

 

0:153  0:000     0 1024x768 attr=9B - ok, edid-, 1024x768, working, highest, pref=0

0:153  0:000     1 640x480 attr=9B - ok, edid-, 640x480, working

0:153  0:000     2 800x600 attr=9B - ok, edid-, 800x600, working

0:154  0:000  BV new mode: 0 1024x768

0:278  0:123   SetMode pref 0 (0) = Success

0:318  0:040  VGA Pci.Hdr.Command=0 - not enabled

0:496  0:177  VGA Pci.Hdr.Command=0 - not enabled

0:505  0:009  VGA Pci.Hdr.Command=0 - not enabled

2:988  2:482  VGA Pci.Hdr.Command=0 - not enabled

3:156  0:167 

3:156  0:000  Now is 18.10.2014,  18:51:9 (GMT+2047)

3:156  0:000  Starting Clover rev 2939 on CLOVER EFI

3:156  0:000  SelfDevicePath=PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,37497720-5D35-4251-9E68-6E13FA9B8DFB,0x28,0x64000) @9B625598

3:156  0:000  SelfDirPath = \EFI\CLOVER

3:156  0:000  UnicodeCollation Status=Success

3:156  0:000  Total Memory Slots Count = 2

3:156  0:000  Type 17 Index = 0

3:156  0:000  Table has error information, checking

3:156  0:000  Found memory information in table 18/0, type=0x3, operation=0x2 syndrome=0x0

3:156  0:000  ...memory OK

3:156  0:000  SmbiosTable.Type17->Speed = 1333

3:156  0:000  SmbiosTable.Type17->Size = 4096

3:156  0:000  Type 17 Index = 1

3:156  0:000  Table has error information, checking

3:156  0:000  Found memory information in table 18/1, type=0x3, operation=0x2 syndrome=0x0

3:156  0:000  ...memory OK

3:156  0:000  SmbiosTable.Type17->Speed = 1333

3:156  0:000  SmbiosTable.Type17->Size = 4096

3:156  0:000  Boot status=0

3:156  0:000  Clover revision: 2939  running on HP Pavilion dv7 Notebook PC

3:156  0:000  ... with board 1800

3:156  0:000  Clover load options size = 0 bytes

3:170  0:013  Using OEM config.plist at path: EFI\CLOVER\config.plist

3:171  0:000  EFI\CLOVER\config.plist loaded: Success

3:175  0:004  Found theme iclover

3:184  0:009  Loading early settings

3:184  0:000  timeout set to 5

3:184  0:000  Custom boot CUSTOM_BOOT_DISABLED (0x0)

3:630  0:446  KextsToPatch: 1 requested

3:835  0:205  KextToPatch 0: AppleAHCIPort (External icons patch) Kext bin patch, data len: 8

4:656  0:820  Default theme: iclover

4:858  0:202  Hiding entries with string \EFI\BOOT\BOOTX64.EFI

5:061  0:202  Hiding entries with string Windows

5:264  0:202  LoadDrivers() start

5:479  0:215  Loading FSInject-64.efi

5:700  0:221  Loading HFSPlus.efi

5:910  0:209   - driver needs connecting

6:116  0:206  1 drivers needs connecting ...

6:324  0:207  PlatformDriverOverrideProtocol not found. Installing ... Success

6:944  0:619  VGA Pci.Hdr.Command=0 - not enabled

7:634  0:690  LoadDrivers() end

8:042  0:407  Console modes reported: 4, available modes:

8:463  0:420    Mode 1: 80x25

8:884  0:421    Mode 3: 100x31

9:305  0:420    Mode 4: 128x40 (current mode)

9:725  0:420  SetScreenResolution: 1024x768 - already set

10:532  0:806  reinit: self device path=PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,37497720-5D35-4251-9E68-6E13FA9B8DFB,0x28,0x64000)

10:949  0:417  new SelfHandle=9B625598

11:367  0:417  CPU Vendor = 756E6547 Model=206A7

11:772  0:404  The CPU supported turbo

12:177  0:404  BrandString = Intel® Core i7-2670QM CPU @ 2.20GHz

12:581  0:404  MSR 0xE2 before patch 1E008404

12:986  0:404  MSR 0xE2 is locked, PM patches will be turned on

13:391  0:404  MSR 0xE4              00020414

13:795  0:404  MSR 0xCE              00000800_60011600

14:200  0:404  non-usable FLEX_RATIO = 1FF00

14:604  0:404  MSR 0x1B0             00000000

15:009  0:404  FSBFrequency=100MHz DMIvalue=1333330kHz

15:414  0:404  Corrected FSBFrequency=100MHz

15:818  0:404  Vendor/Model/Stepping: 0x756E6547/0x2A/0x7

16:223  0:404  Family/ExtFamily: 0x6/0x0

16:628  0:404  MaxDiv/MinDiv: 22.0/8

17:032  0:404  Turbo: 28/28/30/31

17:437  0:404  Features: 0xBFEBFBFF

17:842  0:404  Threads: 8

18:247  0:404  Cores: 4

18:652  0:404  FSB: 100 MHz

19:056  0:404  CPU: 2200 MHz

19:461  0:404  TSC: 2200 MHz

19:865  0:404  PIS: 400 MHz

20:270  0:404  PCI (00|00:00.00) : 8086 0104 class=060000

20:673  0:402  PCI (00|00:01.00) : 8086 0101 class=060400

21:076  0:403  PCI (00|01:00.00) : 1002 6760 class=030000

21:479  0:403  Found Radeon model=AMD Radeon HD 6470M Series

21:882  0:403  PCI (00|00:02.00) : 8086 0116 class=030000

22:285  0:402  Found GFX model=Intel HD Graphics 3000

22:688  0:403  PCI (00|00:16.00) : 8086 1C3A class=078000

23:091  0:403  PCI (00|00:1A.00) : 8086 1C2D class=0C0320

23:495  0:403  PCI (00|00:1B.00) : 8086 1C20 class=040300

23:897  0:402  PCI (00|00:1C.00) : 8086 1C10 class=060400

24:301  0:403  PCI (00|07:00.00) : 10EC 8168 class=020000

24:705  0:404  PCI (00|00:1C.01) : 8086 1C12 class=060400

25:108  0:402  PCI (00|0D:00.00) : 14E4 4727 class=028000

25:511  0:402  PCI (00|00:1C.02) : 8086 1C14 class=060400

25:914  0:403  PCI (00|13:00.00) : 10EC 5209 class=FF0000

26:317  0:403  PCI (00|13:00.01) : 10EC 5209 class=080500

26:720  0:402  PCI (00|00:1C.03) : 8086 1C16 class=060400

27:123  0:403  PCI (00|19:00.00) : 1033 0194 class=0C0330

27:526  0:403  PCI (00|00:1D.00) : 8086 1C26 class=0C0320

27:929  0:402  PCI (00|00:1F.00) : 8086 1C49 class=060100

28:332  0:402  PCI (00|00:1F.02) : 8086 1C03 class=010601

28:735  0:402  PCI (00|00:1F.03) : 8086 1C22 class=0C0500

29:138  0:403  ScanSPD() start

29:546  0:407  SMBus CmdReg: 0x3

29:964  0:418  Scanning SMBus [8086:1C22], mmio: 0xC7506004, ioport: 0x6040, hostc: 0x1

30:397  0:433  SPD[0]: Type 11 @0x50

30:825  0:427  DDR speed 1600MHz

31:243  0:418  Slot: 0 Type 24 4096MB 1600MHz Vendor=Samsung PartNo=M471B5273DH0-CK0 SerialNo=00000B070F0A0B04

31:683  0:439  SPD[2]: Type 11 @0x52

32:110  0:426  DDR speed 1333MHz

32:528  0:418  Slot: 2 Type 24 4096MB 1333MHz Vendor=Samsung PartNo=M471B5273DH0-CH9 SerialNo=090506060A000000

33:039  0:511  SPD[16]: Type 63 @0x60

33:500  0:460  ScanSPD() end

33:908  0:407  Get Acpi Tables List from RSDT:

34:515  0:607   Found table: FACP  SLIC-MPC len=244

34:920  0:404   Found table: ASF!  INSYDE   len=165

35:325  0:404   Found table: HPET  INSYDE   len=56

35:729  0:404   Found table: APIC  INSYDE   len=140

36:134  0:404   Found table: MCFG  INSYDE   len=60

36:539  0:404   Found table: SLIC  SLIC-MPC len=374

36:944  0:404   Found table: SSDT  INSYDE   len=1311

37:349  0:404   Found table: BOOT  INSYDE   len=40

37:753  0:404   Found table: ASPT  INSYDE   len=52

38:158  0:405   Found table: SSDT  INSYDE   len=2382

38:563  0:404   Found table: SSDT  INSYDE   len=2454

38:967  0:404   Found table: SSDT  INSYDE   len=730

39:372  0:404   Found table: SSDT  INSYDE   len=861

39:777  0:404   Found table: SSDT  INSYDE   len=9377

40:182  0:404  Calibrated TSC frequency =2195015933 =2195MHz

40:588  0:406  Loading main settings

40:996  0:407  USB FixOwnership: true

41:404  0:408  Dropping 3 tables

41:811  0:407  Drop table 0 signature="SSDT" (54445353) table-id="CpuPm" (0000006D50757043)

47:517  5:705  set table: 54445353,       6D50757043 to drop:

48:332  0:814  Drop table 1 signature="DMAR" (52414D44)

51:594  3:261  set table: 52414D44,                0 to drop:

52:409  0:815  Drop table 2 signature="SSDT" (54445353) table-id="Cpu0Ist" (0074734930757043)

59:339  6:929  set table: 54445353,   74734930757043 to drop:

60:154  0:815  Config set Fixes will override FixMask mask!

60:562  0:407     final mask=10024004

60:969  0:407  Config set ChassisType=0x8

61:376  0:406  Error in Second part of settings0: Not Found

61:787  0:410  Oem smbios.plist not found at path: EFI\CLOVER\smbios.plist

62:198  0:411  smbios.plist not found, not overriding config.plist

62:605  0:406  found 10 volumes with blockIO

63:009  0:403   0. Volume:

63:413  0:403    PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)

63:820  0:407    Result of bootcode detection: bootable <null string> (<null string>)

64:232  0:412    Volume 'Whole Disc Boot', LegacyOS '', LegacyIcon(s) 'legacy', GUID = <null guid>

64:636  0:403   1. Volume:

65:040  0:403    PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0x0,0x0)

65:783  0:743    Result of bootcode detection: bootable <null string> (<null string>)

66:196  0:412    Volume 'Whole Disc Boot', LegacyOS '', LegacyIcon(s) 'legacy', GUID = <null guid>

66:600  0:404   2. Volume:

67:004  0:403    PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x5,0x0,0x0)

67:407  0:403    found optical drive

67:811  0:404    Volume 'Whole Disc Boot', LegacyOS '', LegacyIcon(s) 'legacy', GUID = <null guid>

68:215  0:403   3. Volume:

68:620  0:404    PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,37497720-5D35-4251-9E68-6E13FA9B8DFB,0x28,0x64000)

69:027  0:407    Result of bootcode detection: bootable Clover (clover)

69:439  0:411    Volume 'EFI', LegacyOS 'Clover', LegacyIcon(s) 'clover', GUID = 37497720-5D35-4251-9E68-6E13FA9B8DFB

69:843  0:403    This is SelfVolume !!

70:247  0:403   4. Volume:

70:651  0:404    PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,9BEB0AB9-4439-4DB2-87AA-634F7B32CB27,0x64028,0x573AC780)

71:059  0:407    Volume 'OSX', LegacyOS '', LegacyIcon(s) '<null string>', GUID = 9BEB0AB9-4439-4DB2-87AA-634F7B32CB27

71:463  0:404   5. Volume:

71:867  0:404    PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(3,GPT,83B8D30E-BB96-4F62-8303-562AF57256BF,0x574107A8,0x135F20)

72:275  0:407    Volume 'Recovery HD', LegacyOS '', LegacyIcon(s) '<null string>', GUID = 83B8D30E-BB96-4F62-8303-562AF57256BF

72:679  0:403   6. Volume:

73:083  0:404    PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0x0,0x0)\HD(1,MBR,0xF38A2093,0x800,0x63800)

73:491  0:407    Result of bootcode detection: bootable Windows (vista,win)

73:903  0:411    Volume 'Legacy HD1', LegacyOS 'Windows', LegacyIcon(s) 'vista,win', GUID = <null guid>

74:307  0:404   7. Volume:

74:711  0:404    PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0x0,0x0)\HD(2,MBR,0xF38A2093,0x64000,0x38024800)

75:118  0:407    Result of bootcode detection: bootable Windows (vista,win)

75:530  0:411    Volume 'Legacy HD2', LegacyOS 'Windows', LegacyIcon(s) 'vista,win', GUID = <null guid>

75:934  0:403   8. Volume:

76:338  0:403    PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0x0,0x0)\HD(3,MBR,0xF38A2093,0x38088800,0x22C9800)

76:745  0:407    Result of bootcode detection: bootable Windows (vista,win)

77:157  0:411    Volume 'Legacy HD3', LegacyOS 'Windows', LegacyIcon(s) 'vista,win', GUID = <null guid>

77:561  0:403   9. Volume:

77:965  0:404    PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0x0,0x0)\HD(4,MBR,0xF38A2093,0x3A352000,0x33830)

78:393  0:427    Result of bootcode detection: bootable Windows (vista,win)

78:844  0:451    Volume 'HP_TOOLS', LegacyOS 'Windows', LegacyIcon(s) 'vista,win', GUID = <null guid>

79:249  0:404  Searching volumes for latest nvram.plist ...

80:086  0:837    3. Volume 'EFI', GUID = 37497720-5D35-4251-9E68-6E13FA9B8DFB - no nvram.plist - skipping!

80:928  0:842    4. Volume 'OSX', GUID = 9BEB0AB9-4439-4DB2-87AA-634F7B32CB27 - no nvram.plist - skipping!

81:766  0:838    5. Volume 'Recovery HD', GUID = 83B8D30E-BB96-4F62-8303-562AF57256BF - no nvram.plist - skipping!

82:603  0:837    9. Volume 'HP_TOOLS', GUID = <null guid> - not GPT - no nvram.plist - skipping!

83:859  1:256   nvram.plist not found!

84:278  0:418  PutNvramPlistToRtVars: nvram.plist not found

84:698  0:420  Invalidating BuiltinIcons...

85:106  0:407  Using theme 'iclover' (EFI\CLOVER\themes\iclover)

85:518  0:412  font WoB_Hellfire_Bold_9W.png loaded from themedir

85:937  0:418  Font loaded: ImageWidth=176 ImageHeight=288

86:356  0:418  Font 2 prepared WxH=11x18 CharWidth=10

86:764  0:407  Choosing theme iclover

87:171  0:407  Custom legacy start

87:588  0:416  Custom legacy end

87:995  0:406  Scanning legacy ...

88:410  0:415   0: 'Whole Disc Boot' (legacy) not legacy

89:241  0:830   1: 'Whole Disc Boot' (legacy) not legacy

90:071  0:829   2: 'Whole Disc Boot' (legacy) not legacy

90:900  0:829   3: 'EFI' (clover) add legacy

91:757  0:856   added 'Boot Clover from EFI' OSType=3 Icon=clover

92:161  0:404   4: 'OSX' (<null string>) not legacy

92:991  0:829   5: 'Recovery HD' (<null string>) not legacy

93:821  0:829   6: 'Legacy HD1' (vista,win) add legacy

94:660  0:838   added 'Boot Windows from Legacy HD1' OSType=2 Icon=vista,win

95:064  0:404   7: 'Legacy HD2' (vista,win) add legacy

95:898  0:834   added 'Boot Windows from Legacy HD2' OSType=2 Icon=vista,win

96:302  0:404   8: 'Legacy HD3' (vista,win) add legacy

97:137  0:834   added 'Boot Windows from Legacy HD3' OSType=2 Icon=vista,win

97:541  0:404   9: 'HP_TOOLS' (vista,win) add legacy

98:374  0:833   added 'Boot Windows from HP_TOOLS' OSType=2 Icon=vista,win

98:778  0:404  Custom entries start

99:187  0:408  Custom entries finish

99:594  0:407  Scanning loaders...

100:015  0:421   0: 'Whole Disc Boot' no file system

100:858  0:842   1: 'Whole Disc Boot' no file system

101:701  0:842   2: 'Whole Disc Boot' no file system

102:544  0:842   3: 'EFI'

103:481  0:937    hiding entry: \EFI\BOOT\BOOTX64.efi

103:906  0:424   4: 'OSX'

104:775  0:868  Check if volume Is Hibernated:

105:175  0:400  Check sleep image 'by signature':

105:607  0:431  read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Not Found

106:017  0:410  using default sleep image name = \private\var\vm\sleepimage

106:440  0:422  Reading first 512 bytes of sleepimage ...

106:970  0:530   OurBlockIoRead: Lba=1C2A390, Offset=385472000 (BlockSize=512)

107:438  0:468   sig lion: 7A7A7A7A

107:848  0:409   sig snow: 0

108:256  0:408   no valid sleep image offset was found

108:666  0:409  Reading completed -> Success

109:078  0:412   sleepimage offset could not be acquired

109:491  0:412   hibernated: no - sign

109:916  0:424      Loader entry created for 'PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,9BEB0AB9-4439-4DB2-87AA-634F7B32CB27,0x64028,0x573AC780)\System\Library\CoreServices\boot.efi'

110:384  0:468   5: 'Recovery HD'

111:249  0:864      Loader entry created for 'PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(3,GPT,83B8D30E-BB96-4F62-8303-562AF57256BF,0x574107A8,0x135F20)\com.apple.recovery.boot\boot.efi'

111:714  0:465   6: 'Legacy HD1' no file system

112:561  0:846   7: 'Legacy HD2' no file system

113:407  0:845   8: 'Legacy HD3' no file system

114:254  0:846   9: 'HP_TOOLS'

115:149  0:894  Custom tool start

115:559  0:410  Custom tool end

115:974  0:415  found tool \EFI\CLOVER\tools\Shell64.efi

116:404  0:429  GetEfiBootDeviceFromNvram: efi-boot-device-data not found

117:247  0:843  EfiBootVolume not found

117:671  0:423  Searching for DefaultVolume 'SYSTEM' ...

118:080  0:409  Default boot entry not found

118:491  0:410  DefaultIndex=-1 and MainMenu.EntryCount=12

118:900  0:409  Use anime=iClover_logo frames=4

119:339  0:438   found 4 frames of the anime

119:907  0:568  Found Mouse device:

120:329  0:422  GUI ready

Oooof - multiple drives and/or multiple volumes per drive?

Also, if you have Windows 8 or later (this includes Windows Server 2012 or later AND the Windows 10 Technical Preview) that hybrid shutdown DOES add extra time to the boot of OS X.  Put the two together and boot logs can get Seriously Long.  (I found this out back when I moved to Mavericks from Lion, and it's not the fault of OS X.  With just one Windows 8+/Server 2012 partition or drive, things get long - every additional partition or drive with Windows on it increases both boot times and the boot-log size.  That is the one thing that augurs for a separate system for OS X or Windows - those extended boot times.  After Christmas, I will likely clone my current setup so I can keep the two OSes separated.  Fortunately, all I'd need is motherboard, CPU, memory, and another case - I HAVE another PSU of the same wattage as my current one.)

Link to comment
Share on other sites

@DroidBR: the delay is probably caused by an external USB device, like a Bluetooth dongle. Try unplugging everything but the keyboard and check again.

 

Unfortunately that problem cannot be easily solved for now, the only “solution” is to compile your own Clover disabling USB support and it’s back to lighting fast boots, that’s what I do in my system.

  • Like 1
Link to comment
Share on other sites

Oooof - multiple drives and/or multiple volumes per drive?

Also, if you have Windows 8 or later (this includes Windows Server 2012 or later AND the Windows 10 Technical Preview) that hybrid shutdown DOES add extra time to the boot of OS X.  Put the two together and boot logs can get Seriously Long.  (I found this out back when I moved to Mavericks from Lion, and it's not the fault of OS X.  With just one Windows 8+/Server 2012 partition or drive, things get long - every additional partition or drive with Windows on it increases both boot times and the boot-log size.  That is the one thing that augurs for a separate system for OS X or Windows - those extended boot times.  After Christmas, I will likely clone my current setup so I can keep the two OSes separated.  Fortunately, all I'd need is motherboard, CPU, memory, and another case - I HAVE another PSU of the same wattage as my current one.)

 

Yes, I have 2 hdd : the first one with windows7 and the second one with osx

Link to comment
Share on other sites

@DroidBR: the delay is probably caused by an external USB device, like a Bluetooth dongle. Try unplugging everything but the keyboard and check again.

 

Unfortunately that problem cannot be easily solved for now, the only “solution” is to compile your own Clover disabling USB support and it’s back to lighting fast boots, that’s what I do in my system.

I unplugged all and still taking too long to start. How I compile my Clover disabling USB support?

Link to comment
Share on other sites

 Share

×
×
  • Create New...