Jump to content

Osx10.9 on up laptop don't start by it self, don't switch off


colago
 Share

31 posts in this topic

Recommended Posts

Hi,

i'm new here, and today i installed osc 10.9 on my laptop hp pavillion dv6850el.

I did all, i arrived on desktop menù and i Was able to' use it.

But When i finished and i switched off pc, it went like in standby mode.

And When i restarted it wasn't able to' start from hd, by only from usb key. Please somebody can help me? Thanks a lot

Link to comment
Share on other sites

Hi,

I used niresh method to' install mavericks.

Please real help me if u can!!!

My laptop specs are:

 

GENERAL

Packaged Quantity 1

System Type Notebook

Recommended Use home use

ManufacturerHP

PROCESSOR / CHIPSET

CPU Intel Core 2 Duo T8100 / 2.1 GHz

Number of Cores Dual-Core

Cache L2 - 3 MB

64-bit Computing Yes

Front Side Bus 800 MHz

Platform Technology Intel Centrino Duo

MEMORY

RAM 4 GB ( 2 x 2 GB )

Max RAM Supported 4 GB

Technology DDR2 SDRAM

Speed 667 MHz / PC2-5300

Form Factor SO DIMM 200-pin

Slots Qty 2

Empty Slots 0

STORAGE

Interface Serial ATA-150

Optical Drive DVD±RW (±R DL) / DVD-RAM / BD-ROM

Disc Labeling Technology LightScribe Technology

Optical Drive (2nd) none

Type portable

DISPLAY

Resolution 1280 x 800 ( WXGA )

Widescreen Yes

Image Aspect Ratio 16:10

Features BrightView

AUDIO & VIDEO

Graphics Processor NVIDIA GeForce 8400M GS - 256 MB

Total Available Graphics Memory 1535 MB

Camera Yes

Sound Microphone

Compliant Standards Sound Blaster Pro

Audio Features Altec Lansing speakers

INPUT

Type keyboard

COMMUNICATIONS

Wireless 802.11b/g

Network Interface 10/100 Ethernet

MODEM

Max Transfer Rate 56 Kbps

AC ADAPTER

Input AC 120/230 V ( 50/60 Hz )

Output 90 Watt , 18.5 V , 4.9 A

CONNECTIONS & EXPANSION

Slots 1 x ExpressCard/54 ( 1 free )

Interfaces 3 x Hi-Speed USB - 4 pin USB Type A

1 x display / video - HDMI

1 x display / video - VGA - 15 pin HD D-Sub (HD-15)

1 x modem - phone line - RJ-11

1 x network - Ethernet 10Base-T/100Base-TX - RJ-45

1 x display / video - S-video output

2 x headphones - output - mini-phone stereo 3.5 mm

1 x microphone - input - mini-phone 3.5 mm

1 x IEEE 1394 (FireWire)

1 x docking / port replicator

1 x remote control - infrared

Memory Card Reader 5 in 1 ( SD Card, Memory Stick, Memory Stick PRO, MultiMediaCard, xD-Picture Card )

SOFTWARE

Software Included CyberLink DVD Play

MISCELLANEOUS

Included Accessories remote control

DIMENSIONS & WEIGHT

Width 14.1 in

Depth 10.1 in

Height 1.6 in

Weight 6.8 lbs

ENVIRONMENTAL STANDARDS

EPEAT Compliant EPEAT Silver

ENERGY STAR Qualified Yes

SUSTAINABILITY

ENERGY STAR Qualified Yes

EPEAT Level EPEAT Silver

GENERAL

ManufacturerHP

Link to comment
Share on other sites

Hello

 

Niresh is distro and to me distro is waste time, if waste time for you and for who gonna help you

 

I gave to you a method to install OSX... see that

 

Other... just put necessary infos about your hardware... see in my signature and make something like that... :)

Link to comment
Share on other sites

Hi!

thanks again for your reply!! Niresh don't look so bad, also 'cause I'm able to run it, but it has that problem when I switch off (it looks like it go in standby), and when I start I'm not be able to do it without key, where I can select to start from HDD. else, without key  my pc don't start.

Please, could you be able to help me with this niresh distro? I'd like to mount Mavericks! please

 

ps: when I entered in BIOS to change settings before formatting pc, I was't able to find SATA Control Mode  where to change in AHCI...I searched, a lot, but my bios don't have it...I don't know if it should be the why OSX don't start by itself now....

 

 

------------------------------------------

 

 

CPU: Intel Core 2 Duo T8100 / 2.1 GHz | Memory: RAM 4 GB ( 2 x 2 GB )| Audio: Compliant Standards Sound Blaster Pro Audio Features Altec Lansing speakers | Graphic: NVIDIA GeForce 8400M GS - 256 MB | HDD: Interface Serial ATA-150 250GB | OS: OS X Mavericks 10.9?!?! I'll hope!

Link to comment
Share on other sites

Hello

 

My friend... like i said.. distro is waste time, never you'll get 99% of OSX with it, and never you can be able to update of OS to OS... ex: You have 10.9 and want update to 10.9.1, this is impossible in distro... but possible in retail ;)

 

You have the choice to get a system running in minimum or in max... other... your hardware is a bit old to Mavericks... i advice use ML you can after update for 10.8.5, but only if you use retail

Link to comment
Share on other sites

Hi,

Ok, I could use a retail version of OSx. But where I can found mavericks 10.9 ? I'd like to install it Instead ml.

Other question:

ps: when I entered in BIOS to change settings before formatting pc, I was't able to find SATA Control Mode where to change in AHCI...I searched, a lot, but my bios don't have it...I don't know if it should be the why OSX don't start by itself now....

Thanks

Link to comment
Share on other sites

Hello

 

Like i said, maybe Mavericks doesn't support your hardware, maybe, but have many probability in don't support it...

Because of this i gave to you Mountain Lion...

 

If you don't have AHCI in Bios don't worries... we gonna fix it, but before try configure your Bios: olarila.web337.kinghost.net/forum/viewtopic.php?f=2&t=1804

 

Did you already download that image?

Link to comment
Share on other sites

No, I didn't download yet, I'll do it in 24 hours, I'll hope.

I searched, but I don't have that BIOS configuration options: how can I do? I'm sure also niresh should start, the problem is I can't change that bios options...let me know, thanks.

Do u know where I can find a mavericks retail? which are minimum requirement for ML/mavericks?

let me know, thanks again!

Link to comment
Share on other sites

Hallo

 

I gave to you a mavericks retail, 100% retail, dowloaded from Apps Store, just added Bootloader+kexts... use that my method you'll use retail not distro with it....

 

If you don't have AHCI maybe you gonna get Waite for a Root Device error, so after donwload that my solution, make your usb installer and put this kext: http://www.insanelymac.com/forum/topic/190449-superviaatakext-for-snow-leopard-marvell-88se6121/page-1

In S/L/E folder of usb installer

Link to comment
Share on other sites

Man: I'have to thanks u a lot, I'm tring to do all you 're tell to me! Now I'm creating usb key, tomorrow I'll try to install it! I'll hope I'll be able!

thanks again 4 all!

 

ps: If with my distro I go in apple store & I download the mavericks and then i create usb key with pandora, it that a retail?

Link to comment
Share on other sites

I created usb key, but when I restart pc with it inside appears Clover bootloader: is it right? a retail version use it by default? not chameleon or others?

Other question: if I look inside usb key folders, some files are in italian: is it right for a retail version?

Let me know, however this afternoon I'll try to install it!

Link to comment
Share on other sites

Hello

 

Let's put somethigs in here...

 

Retail=OSX download from Apps Store

 

Bootloader=Something like a system that emule many infos and files to enable install OSX in PC

 

When this image was made the user that create it installed Clover, but if him want he can install Chameleon Without proeblem... wahtever bootloader him use... what metter is the image, if it is retail or not...

 

Italian??? Look i don't know... like a said.. retail is something original.... downloaded from apps store...

 

Just try boot with this usb installer... ;)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...