desdes84 Posted June 2, 2014 Share Posted June 2, 2014 Hi... I have a big problem... I hope you can help meHardware:Asus Z97I-PlusIntel I3-4330Sk Video Intel HD 4600 S.O.Mavericks 10.9.3I mavericks recognizes the video card with 1024MB, but qe / ci do not work, I tried them all, can you give me a hand? to start mavericks I had to delete all the kext files video card Thanksss information system.zip IOREG.zip config.plist.zip Link to comment https://www.insanelymac.com/forum/topic/298390-z97i-plus-i3-4330-intel-hd-4600-qeci-dont-work-help-me-please/ Share on other sites More sharing options...
Areeb Qaisar Posted June 2, 2014 Share Posted June 2, 2014 Which boot loader you are using ? If you are on Clover, then you need to play with ig-platform-id values. Link to comment https://www.insanelymac.com/forum/topic/298390-z97i-plus-i3-4330-intel-hd-4600-qeci-dont-work-help-me-please/#findComment-2023885 Share on other sites More sharing options...
desdes84 Posted June 2, 2014 Author Share Posted June 2, 2014 hi, I use clover, and I set ig-platform-id 0D220003 can you give me some advice? Link to comment https://www.insanelymac.com/forum/topic/298390-z97i-plus-i3-4330-intel-hd-4600-qeci-dont-work-help-me-please/#findComment-2023888 Share on other sites More sharing options...
RockStrongbow Posted June 2, 2014 Share Posted June 2, 2014 Try replacing AppleIntelFramebufferAzul.kext with the one from 10.9.1, don't forget to repair permissions. There was another thread where I suggested this and it worked. There you'll also find the link where you can download the kext. Link to comment https://www.insanelymac.com/forum/topic/298390-z97i-plus-i3-4330-intel-hd-4600-qeci-dont-work-help-me-please/#findComment-2023892 Share on other sites More sharing options...
desdes84 Posted June 2, 2014 Author Share Posted June 2, 2014 Try replacing AppleIntelFramebufferAzul.kext with the one from 10.9.1, don't forget to repair permissions. There was another thread where I suggested this and it worked. There you'll also find the link where you can download the kext. with this file, I converted the video card memory from 1536MB to 1024mb, but it still does not work qe-ci :-( Link to comment https://www.insanelymac.com/forum/topic/298390-z97i-plus-i3-4330-intel-hd-4600-qeci-dont-work-help-me-please/#findComment-2023894 Share on other sites More sharing options...
RockStrongbow Posted June 2, 2014 Share Posted June 2, 2014 1. Is this a "Haswell Refresh" CPU? 2. DVI or HDMI? Link to comment https://www.insanelymac.com/forum/topic/298390-z97i-plus-i3-4330-intel-hd-4600-qeci-dont-work-help-me-please/#findComment-2023895 Share on other sites More sharing options...
desdes84 Posted June 2, 2014 Author Share Posted June 2, 2014 Is this a "Haswell Refresh" CPU? yes i3-4330 Link to comment https://www.insanelymac.com/forum/topic/298390-z97i-plus-i3-4330-intel-hd-4600-qeci-dont-work-help-me-please/#findComment-2023896 Share on other sites More sharing options...
RockStrongbow Posted June 2, 2014 Share Posted June 2, 2014 I'm having the same problem and currently investigate it. Might have something to do with the refresh (mine is a 4590). Bit tricky... Try different ig-platform-id values, e.g. 0a260006 or 0a260005 might work if you connect via DVI (gives me a blank screen on HDMI). Link to comment https://www.insanelymac.com/forum/topic/298390-z97i-plus-i3-4330-intel-hd-4600-qeci-dont-work-help-me-please/#findComment-2023898 Share on other sites More sharing options...
desdes84 Posted June 2, 2014 Author Share Posted June 2, 2014 I'm having the same problem and currently investigate it. Might have something to do with the refresh (mine is a 4590). Bit tricky... Try different iv-platform-id values, e.g. 0a260006 or 0a260005 might work if you connect via DVI (gives me a blank screen on HDMI). I try now Link to comment https://www.insanelymac.com/forum/topic/298390-z97i-plus-i3-4330-intel-hd-4600-qeci-dont-work-help-me-please/#findComment-2023899 Share on other sites More sharing options...
desdes84 Posted June 2, 2014 Author Share Posted June 2, 2014 I'm having the same problem and currently investigate it. Might have something to do with the refresh (mine is a 4590). Bit tricky... Try different ig-platform-id values, e.g. 0a260006 or 0a260005 might work if you connect via DVI (gives me a blank screen on HDMI). I tried with the result 0a260006 and 0a260005 black screen no device connected Link to comment https://www.insanelymac.com/forum/topic/298390-z97i-plus-i3-4330-intel-hd-4600-qeci-dont-work-help-me-please/#findComment-2023919 Share on other sites More sharing options...
desdes84 Posted June 3, 2014 Author Share Posted June 3, 2014 I followed all the guides imaginable on the web, now I'm stumped ... help me Link to comment https://www.insanelymac.com/forum/topic/298390-z97i-plus-i3-4330-intel-hd-4600-qeci-dont-work-help-me-please/#findComment-2024414 Share on other sites More sharing options...
RehabMan Posted June 3, 2014 Share Posted June 3, 2014 I tried with the result 0a260006 and 0a260005 black screen no device connected Why are you using laptop framebuffers on a desktop? Link to comment https://www.insanelymac.com/forum/topic/298390-z97i-plus-i3-4330-intel-hd-4600-qeci-dont-work-help-me-please/#findComment-2024442 Share on other sites More sharing options...
desdes84 Posted June 3, 2014 Author Share Posted June 3, 2014 Why are you using laptop framebuffers on a desktop? to try them all you have other recommendations? Link to comment https://www.insanelymac.com/forum/topic/298390-z97i-plus-i3-4330-intel-hd-4600-qeci-dont-work-help-me-please/#findComment-2024453 Share on other sites More sharing options...
RehabMan Posted June 3, 2014 Share Posted June 3, 2014 to try them all you have other recommendations? What were the actual flags you used? What bootloader are you using? Are you using a digital connection to your monitor? How are you determining that QE/CI is not working? Did you try dart=0 in addition (or be sure VT-d is disabled). Link to comment https://www.insanelymac.com/forum/topic/298390-z97i-plus-i3-4330-intel-hd-4600-qeci-dont-work-help-me-please/#findComment-2024479 Share on other sites More sharing options...
desdes84 Posted June 3, 2014 Author Share Posted June 3, 2014 What were the actual flags you used? What bootloader are you using? Are you using a digital connection to your monitor? How are you determining that QE/CI is not working? Did you try dart=0 in addition (or be sure VT-d is disabled). Hy j use dvi, the bootloader is clover whit flags inject intel igplatform 0d220003 Qe/ci not work beacouse it does not start dvd and problems graphics on safari, screen saver, taskbar Link to comment https://www.insanelymac.com/forum/topic/298390-z97i-plus-i3-4330-intel-hd-4600-qeci-dont-work-help-me-please/#findComment-2024511 Share on other sites More sharing options...
RehabMan Posted June 3, 2014 Share Posted June 3, 2014 Hy j use dvi, the bootloader is clover whit flags inject intel igplatform 0d220003 Qe/ci not work beacouse it does not start dvd and problems graphics on safari, screen saver, taskbar You didn't answer all the questions. You should look in ioreg to determine if the drivers are loading properly... Link to comment https://www.insanelymac.com/forum/topic/298390-z97i-plus-i3-4330-intel-hd-4600-qeci-dont-work-help-me-please/#findComment-2024553 Share on other sites More sharing options...
desdes84 Posted June 3, 2014 Author Share Posted June 3, 2014 Non hai risposto a tutte le domande. Si dovrebbe cercare in ioreg per determinare se i driver si caricano correttamente ... hello time I come home and try to dart = 0, and place the image of ioreg, I tried it with chameleon ge = yes igpenabler = yes intelazulfb from 1 to 15 inserting the device through hex file Link to comment https://www.insanelymac.com/forum/topic/298390-z97i-plus-i3-4330-intel-hd-4600-qeci-dont-work-help-me-please/#findComment-2024559 Share on other sites More sharing options...
Fabio1971 Posted June 3, 2014 Share Posted June 3, 2014 Try replacing AppleIntelFramebufferAzul.kext with the one from 10.9.1, don't forget to repair permissions. There was another thread where I suggested this and it worked. There you'll also find the link where you can download the kext. http://www.insanelymac.com/forum/topic/296682-intel-hd-4600-not-working-mavericks-1092/ Fabio Link to comment https://www.insanelymac.com/forum/topic/298390-z97i-plus-i3-4330-intel-hd-4600-qeci-dont-work-help-me-please/#findComment-2024560 Share on other sites More sharing options...
desdes84 Posted June 3, 2014 Author Share Posted June 3, 2014 http://www.insanelymac.com/forum/topic/296682-intel-hd-4600-not-working-mavericks-1092/ Fabio Now try again with 10.9.1 kext and I let you know, thanks for your patience :-) Link to comment https://www.insanelymac.com/forum/topic/298390-z97i-plus-i3-4330-intel-hd-4600-qeci-dont-work-help-me-please/#findComment-2024566 Share on other sites More sharing options...
RehabMan Posted June 3, 2014 Share Posted June 3, 2014 hello time I come home and try to dart = 0, and place the image of ioreg, I tried it with chameleon ge = yes igpenabler = yes intelazulfb from 1 to 15 inserting the device through hex file Boot flags are case sensitive. Should be GraphicsEnabler, IGPEnabler, and IntelAzulFB. Also, IGPEnabler is specific to Chimera, unrecognized in Chameleon. I don't know what "inserting the device through hex file" means... Link to comment https://www.insanelymac.com/forum/topic/298390-z97i-plus-i3-4330-intel-hd-4600-qeci-dont-work-help-me-please/#findComment-2024575 Share on other sites More sharing options...
desdes84 Posted June 3, 2014 Author Share Posted June 3, 2014 Boot flags are case sensitive. Should be GraphicsEnabler, IGPEnabler, and IntelAzulFB. Also, IGPEnabler is specific to Chimera, unrecognized in Chameleon. I don't know what "inserting the device through hex file" means... device properties whit chameleon... :-( http://www.insanelymac.com/forum/topic/296682-intel-hd-4600-not-working-mavericks-1092/ Fabio hy Fabio... unfortunately it did not work and everything always jerky :-( I added in the first post the file system, config.plist, ioreg thanks for the help Link to comment https://www.insanelymac.com/forum/topic/298390-z97i-plus-i3-4330-intel-hd-4600-qeci-dont-work-help-me-please/#findComment-2024593 Share on other sites More sharing options...
RehabMan Posted June 3, 2014 Share Posted June 3, 2014 device properties whit chameleon... :-( Make sure you're not using multiple methods at the same time. I added in the first post the file system, config.plist, ioreg Correct way to specify ig-platform-id is 0x0D220003, not 0D220003 (maybe both are accepted, but I've never seen it that way) Try removing VideoPorts and VRAM. Also, you should Generate PStates/CStates for power management (PluginType=1 also). Link to comment https://www.insanelymac.com/forum/topic/298390-z97i-plus-i3-4330-intel-hd-4600-qeci-dont-work-help-me-please/#findComment-2024652 Share on other sites More sharing options...
desdes84 Posted June 4, 2014 Author Share Posted June 4, 2014 Make sure you're not using multiple methods at the same time.Correct way to specify ig-platform-id is 0x0D220003, not 0D220003 (maybe both are accepted, but I've never seen it that way)Try removing VideoPorts and VRAM.Also, you should Generate PStates/CStates for power management (PluginType=1 also). Thanks very thanks Link to comment https://www.insanelymac.com/forum/topic/298390-z97i-plus-i3-4330-intel-hd-4600-qeci-dont-work-help-me-please/#findComment-2024783 Share on other sites More sharing options...
Recommended Posts