DistortedAxis Posted February 3, 2014 Share Posted February 3, 2014 Hi All, Looking for some guidance. Decided to go and Install Mavericks 10.9 on my Dell XPS Studio 9000. It appears to be working (for the most part) I installed it using this guide found HERE ~ Niresh Method. After I used [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] to finish the post installation with Chimera. I'm having some issues with a few things (More information below). I'm currently unable to get the boot loader to load for dual booting from OSX and Windows 7.Hoping someone here can guide me in the right direction. Initially I was just playing around as I didnt think I would have been able to succesfully run OSX on my dell. Now I’d like to actually dual boot Win 7 Home Premium and OSX 10.9 using both if possible. One thing I'd like to mention is that I have everything backed up that is essential to me. I am open to completely formatting and starting over if necessary. Obviously I'd like for this to work without all that hassle... but open to it none-the-less. First Thing First, SYSTEM SPECS:Dell Studio XPS 435T / 9000 Chassis Built In Dell H323J 15 in 1 USB Media Card Reader Realtek RTS5151 chipset (1 USB Port is Working, Card Reader Currently Not Working With 10.9) Built In 4 Port USB 2.0 Ports on the top / front of chasis (Working with 10.9) Motherboard Dell Motherboard X501H INTEL X58 Link Intel Core i7-920 Bloomfield 2.66GHz LGA 1366 130W Quad-Core Processor Link · 5.1 Surround Onboard Audio ALC1200 / 888 ICH10 Chipset (Currently Not Working With 10.9) · Onboard Gigabit Lan Realtek RTL8111/8168B (Working With 10.9) · Onboard JMicron JMB36X RAID Controller (Unknown - Not Tested) · RAM Dell Brand 12GB ~ 6x 2GB DDR3 1066MHz1 - Firewire (Unknown - Not Tested)2 - Onboard Gigabit Lan Realtek RTL8111/8168B (Working With 10.9)3 - Onboard Audio ALC1200 / 888 ICH10 Chipset (Currently Not Working With 10.9)4 - Onboard Audio ALC1200 / 888 ICH10 Chipset (Currently Not Working With 10.9)5 - Onboard Audio ALC1200 / 888 ICH10 Chipset (Currently Not Working With 10.9)6 - Onboard Audio ALC1200 / 888 ICH10 Chipset (Currently Not Working With 10.9)7 - Onboard Audio ALC1200 / 888 ICH10 Chipset (Currently Not Working With 10.9)8 - Onboard Audio ALC1200 / 888 ICH10 Chipset (Currently Not Working With 10.9)9 - 4 Port USB 2.0 (Working With 10.9)10 - eSATA (Unknown - Not Tested)11 - Turns On / Can See Red Optical Signal / No Sound Output (Currently Not Working With 10.9) Graphics Card XFX HD7700 Core Graphics Card 1GB DDR5 Link (Working With 10.9)Only Boots / Natively supported with GraphicsEnabler=No PCIe Cards Vantec UG1-PC345 USB 3.0 PCIe Card Link (Working With 10.9) TL-WDN4800 PCIe WIFI Card Link (Working With 10.9) PSU Dell 475W Power SupplyHard Drives- 3.5” Western Digital 1TB Drive 7500RPM / SATA Connection- 3.5” Seagate Baracuda 3TB Drive 7500RPM / SATA SATA Connection- 3.5” Western Digital 500gb Drive 7500RPM / SATA SATA ConnectionHere is my current drive configurationBIOS Screens AFTER InstallI removed the Niresh USB Key and rebootedI received the infamous boot0 error. After searching I found a lot of posts regarding this matter. I've tried a couple different solutions. Nothing has worked so far. Any suggestions? I have attempted the following fixes for this issue:http://www.tonymacx86.com/25-boot0-error-official-guide.htmlhttp://niresh12495.com/topic/613-boot0-error/http://www.macbreaker.com/2012/02/hackintosh-boot0-error.htmlhttp://youtu.be/Jmez9323CJIAfter all these attempts I am receiving the same issue. Anyone have an idea how I should proceed? Is there something I am missing? This is driving me crazy. I am able to boot to both partitions using the Niresh 10.9 Mavericks USB Key as long as I boot into the "Recovery Partition" for Windows 7 or OSX Mavericks. Showing the irregularities during boot between DVI and HDMI connections when running dual monitors JUST BEFORE LOG ON SCREEN APPEARS. REFERENCE AMD Radeon HD 7xxx Graphics Support in OS XHow to enable the AMD Radeon HD 7970, 7950, 7870, 7850, 7770, or 7750 on your HackintoshAny help,. suggestions, is appreciated! I'm still working on this boot0 issue, and then I need to look at the sound and sleep / wake issues and keyboard mapping. Link to comment Share on other sites More sharing options...
DistortedAxis Posted February 5, 2014 Author Share Posted February 5, 2014 Still cannot get past this boot 0 error. I've tried everything! Link to comment Share on other sites More sharing options...
Recommended Posts