Warior88 Posted December 31, 2013 Share Posted December 31, 2013 Hi there folks!I got an Fujitsu Esprimo Q900 (size of an Mac mini) so for weeks I'm trying to get Mountain Lion 10.8.2 installer to work on my System.The installation went down smooth without any problems (is that a good sign concerning my hardware?) but after restart I got stuck... booting with -v (after installation) brought me the following messages: ... Waiting for DSMOS... Previous Shutdown Cause: 5 ACPI_SMC_PlatformPlugin::start - waitForService(resourceMatching(AppleIntelCPUPowerManagement) timed out Transcript Offline - Buffer Poll Allocate [181000] failed DSMOS has arrived [iOBluetoothHCIController][start] -- completed Stuck at this point! My Systems Specs are:CPU: Intel Celeron B800 @1,5GHz (2x)Chipset: QM76motherbord: fujitsugraphics: onboard I used several flags in all kinds of combinations:-v -x cpus=1 PCIRootUID=1/0 UserKernelCache=No/Yes GraphicsEnabler=Yes/No npci=0x3000/2000I researched in all different kinds of forums with similar problems but it seems that no one ever tried running OSX86 on a Q900... Bios settings:hdd mode=ahciIntel VT-d=deactivated (read that this might cause problems isn't needed anyway)Intel Virtualization technology= enabled I know my hardware is probably to old or just not ready for OSX86 but due to there was no thread that said- OSX86 and Q900 DOES NOT WORKI gave it a try, so if you guys no better then let me know so I can stop waisting hours for this machine ;-)Any help would be appreciated! Link to comment https://www.insanelymac.com/forum/topic/294962-several-problems-on-fujitsu-q900-after-installation/ Share on other sites More sharing options...
Warior88 Posted January 2, 2014 Author Share Posted January 2, 2014 No one? Link to comment https://www.insanelymac.com/forum/topic/294962-several-problems-on-fujitsu-q900-after-installation/#findComment-1981174 Share on other sites More sharing options...
iFIRE Posted January 2, 2014 Share Posted January 2, 2014 onboard graphics not work, not sure if work in SNOW LEOPARD or 10.5 , the hardware is a bit old Link to comment https://www.insanelymac.com/forum/topic/294962-several-problems-on-fujitsu-q900-after-installation/#findComment-1981177 Share on other sites More sharing options...
Recommended Posts