Jump to content
8 posts in this topic

Recommended Posts

1.) I have a HD Radeon 5870 that is working but not showing up as a 5870 in the system menu.... and There is no 3D rendering cant launch Portal I could when the system was using the intel 3000 graphics.

2.) When trying to set the system definition to 5,1 i get KP's... can only use 3,1 anyway to change this????

 

Otherwise system is working great...

 

 

Oh BTW i do not have a DSDT.... ran the install using dumb other sites tools... stuff works but not 100% as you can see above...

my system specs are in my signature if anyone thinks one is a good idea....

 

Thanks!

Yeah i did, here is a copy of my plist

 

<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">

<plist version="1.0">

<dict>

<key>AtiConfig</key>

<string>Uakari</string>

<key>AtiPorts</key>

<string>4</string>

<key>EthernetBuiltIn</key>

<string>Yes</string>

<key>GraphicsEnabler</key>

<string>Yes</string>

<key>Kernel</key>

<string>mach_kernel</string>

<key>Kernel Flags</key>

<string>npci=0x2000</string>

<key>PciRoot</key>

<string>1</string>

<key>Theme</key>

<string>Blackosx_Default_II</string>

<key>Timeout</key>

<string>2</string>

<key>USBBusFix</key>

<string>Yes</string>

<key>UseKernelCache</key>

<string>Yes</string>

</dict>

</plist>

Yeah i did, here is a copy of my plist

 

 

<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com...yList-1.0.dtd">

<plist version="1.0">

<dict>

<key>AtiConfig</key>

<string>Uakari</string>

<key>AtiPorts</key>

<string>4</string>

<key>EthernetBuiltIn</key>

<string>Yes</string>

<key>GraphicsEnabler</key>

<string>Yes</string>

<key>Kernel</key>

<string>mach_kernel</string>

<key>Kernel Flags</key>

<string>npci=0x2000</string>

<key>PciRoot</key>

<string>1</string>

<key>Theme</key>

<string>Blackosx_Default_II</string>

<key>Timeout</key>

<string>2</string>

<key>USBBusFix</key>

<string>Yes</string>

<key>UseKernelCache</key>

<string>Yes</string>

</dict>

</plist>

{ 0x6898, 0x00D0106B, CHIP_FAMILY_CYPRESS, "ATI Radeon HD 5870",   kLangur  },
{ 0x6898, 0x032E1043, CHIP_FAMILY_CYPRESS, "ATI Radeon HD 5870",   kUakari  },
{ 0x6898, 0x0B001002, CHIP_FAMILY_CYPRESS, "ATI Radeon HD 5870",   kZonalis },
{ 0x6898, 0x29611682, CHIP_FAMILY_CYPRESS, "ATI Radeon HD 5870",   kUakari  },
{ 0x6898, 0xE140174B, CHIP_FAMILY_CYPRESS, "ATI Radeon HD 5870",   kUakari  },
{ 0x6898, 0x21E51458, CHIP_FAMILY_CYPRESS, "ATI Radeon HD 5870",   kUakari  },

According to the source of chameleon, there are several options you can make.

Try them one after another :D hope it works.

 

plus, I suggest you remove the ATIports in boot.plist.

{ 0x6898, 0x00D0106B, CHIP_FAMILY_CYPRESS, "ATI Radeon HD 5870", kLangur },
{ 0x6898, 0x032E1043, CHIP_FAMILY_CYPRESS, "ATI Radeon HD 5870", kUakari },
{ 0x6898, 0x0B001002, CHIP_FAMILY_CYPRESS, "ATI Radeon HD 5870", kZonalis },
{ 0x6898, 0x29611682, CHIP_FAMILY_CYPRESS, "ATI Radeon HD 5870", kUakari },
{ 0x6898, 0xE140174B, CHIP_FAMILY_CYPRESS, "ATI Radeon HD 5870", kUakari },
{ 0x6898, 0x21E51458, CHIP_FAMILY_CYPRESS, "ATI Radeon HD 5870", kUakari },

According to the source of chameleon, there are several options you can make.

Try them one after another :D hope it works.

 

plus, I suggest you remove the ATIports in boot.plist.

 

How do i do this?

Thanks! got it working awesome now, only issues now is this.

On power up i get my BIOS screen followed by my chameleon screen, once i select to launch ML i then get the Grey screen with the apple logo.

Now here is my latest WTF... the monitor won't display the ML login screen unless i unplug the DVI cable from the graphics card and re attach it..

what would cause this? Was never an issue when i was using a Toshiba tv via HDMI... no with a Samsung SyncMaster 305t using DVI-D i have to

constantly unplug and re attach the DVI-D cable to get a picture.... any ideas?

 

oh my resolution on the toshiba 24" was 1080p

my new resolution is 2560 x 1600

 

Thanks

Thanks! got it working awesome now, only issues now is this.

On power up i get my BIOS screen followed by my chameleon screen, once i select to launch ML i then get the Grey screen with the apple logo.

Now here is my latest WTF... the monitor won't display the ML login screen unless i unplug the DVI cable from the graphics card and re attach it..

what would cause this? Was never an issue when i was using a Toshiba tv via HDMI... no with a Samsung SyncMaster 305t using DVI-D i have to

constantly unplug and re attach the DVI-D cable to get a picture.... any ideas?

 

oh my resolution on the toshiba 24" was 1080p

my new resolution is 2560 x 1600

 

Thanks

You should quote others replies. You should try to modify the framebuffer's value.

You can search the forum for the info that you need.

×
×
  • Create New...