revere521 Posted September 19, 2006 Share Posted September 19, 2006 First hello! and thaks in advance for any help.... I have not been able to get my ethernet adaptor to work.... I have tried installing 10.4.1 (somehow not the deadmoo image everyone istalking about) and also 10.4.4 updated to 5 (HOTiSO). with neither i could get my onboard via rhine II adaptor to work. So.. I read that the cheap linksys card seems to work.. so i installed one and that did not work... i have used the 1.0.0 tulip, the 1.0.2 tulip, and I have tried to compile my own with 1.2.0 tulip - still nada i have added the device id to the info.plist on each existing device (both 0x13170985 and 0x09851317 - in case one was wrong) under the system profiler - en0 is listed as the onboard ethernet device, but in the network configuration i stillcan not select the adaptor as "on" (oh and the onboard is disabled in the bios) its an MSI motherboard with the via chipset,512 mb ram, celeron d (2.93 ghz), ati radeon 9550 (256), onboard ac97. other than a few tweaks to get my micro wireless keboard to work (using legacy unfortuantely), and only one channel of sound, everything works great in both 10.4.1 and 10.4.4/5 ? any suggestions? Link to comment https://www.insanelymac.com/forum/topic/28040-linksys-tx100-lne-v4-troubles/ Share on other sites More sharing options...
revere521 Posted September 19, 2006 Author Share Posted September 19, 2006 Nobody? nobody had issues with the linksys card? Link to comment https://www.insanelymac.com/forum/topic/28040-linksys-tx100-lne-v4-troubles/#findComment-191857 Share on other sites More sharing options...
Recommended Posts