kernel panic on first boot... need help finding solution

[munkymonkjr]

Hi.

 

As you might have read from my earlier thread I had issues relating to the PS2 ktext, and i got around that ok. This time i have yet another issue to resolve, and this time I can't seem to find a solution.

 

Here are the last few lines of the boot prompt:

unable to start recv logic
Flushing scan cache!
Backtrace, Format = Frame : Return Address (4 potential args on stack)
0x1457bf84 : 0x13c7c9 (0x1 0x0 0x0 0x0)
0x1457bf84 : 0x19b69 (0x0 0x0 0x2eb03b8 0x49b800) Backtrace terminated-invalid frame pointer 0x0

Kerel version:
Darwin Kernel Version 8.4.1: Tue Jan 3 18:23:53 PST 2006; root:xnu-792.7.90.obj-1/RELEASE_I386

panic (cpu 0 caller 0x0019BC80): Panic double fault (CPU:0, code:0x8, trace_trap:0x0), registers:
CR0: 0x8001003b, CR2: 0x17614f38, CR3: 0x017b1000, CR4: 0x000006a0
EAX: 0x017b1000, EBX: 0x0019b78, ECX: 0x02eb0140, EDX: 0x17614f3c
ESP: 0x17614f3c, EBP: 0x1457bf84, ESI: 0x02dcf470, EDI: 0x2ec062ed
EFL: 0x00010006, EIP: 0xffe01103

Debugger called: <panic>
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x422f0c : 0x128aea (0x3b9dcc 0x422f30 0x130c94 0x0)
0x044f4c : 0x19bc80 (0x3bf070 0x0 0x8 0x0)
0x422fec : 0x197543 (0x8 0x0 0x0 0x17b7000) Backtrace terminated-invalid frame pointer 0x0

Kernel version:
Darwin Kernel Version 8.4.1: Tue Jan 3 18:23:53 PST 2006; root:xnu-792.7.90.obj-1/RELEASE_I386

 

my hardware is a Uniwill 258Ka0 laptop with AMD64 3200+ (SSE2 only)

specs here: http://uniwill.com/products/performance/25...hp?HL=2&P=2

using the 10.4.6-myz release

 

tried booting "-v cpus=1 platform=x86pc" with no luck.

 

thanks!

[jome]

Hi,

 

I'm having exactly the same error. Did you find a solution for this. Any help is appreciated?

 

Thanks,

 

J.

 

Hi.

 

As you might have read from my earlier thread I had issues relating to the PS2 ktext, and i got around that ok. This time i have yet another issue to resolve, and this time I can't seem to find a solution.

 

Here are the last few lines of the boot prompt:

unable to start recv logic
Flushing scan cache!
Backtrace, Format = Frame : Return Address (4 potential args on stack)
0x1457bf84 : 0x13c7c9 (0x1 0x0 0x0 0x0)
0x1457bf84 : 0x19b69 (0x0 0x0 0x2eb03b8 0x49b800) Backtrace terminated-invalid frame pointer 0x0

Kerel version:
Darwin Kernel Version 8.4.1: Tue Jan 3 18:23:53 PST 2006; root:xnu-792.7.90.obj-1/RELEASE_I386

panic (cpu 0 caller 0x0019BC80): Panic double fault (CPU:0, code:0x8, trace_trap:0x0), registers:
CR0: 0x8001003b, CR2: 0x17614f38, CR3: 0x017b1000, CR4: 0x000006a0
EAX: 0x017b1000, EBX: 0x0019b78, ECX: 0x02eb0140, EDX: 0x17614f3c
ESP: 0x17614f3c, EBP: 0x1457bf84, ESI: 0x02dcf470, EDI: 0x2ec062ed
EFL: 0x00010006, EIP: 0xffe01103

Debugger called: <panic>
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x422f0c : 0x128aea (0x3b9dcc 0x422f30 0x130c94 0x0)
0x044f4c : 0x19bc80 (0x3bf070 0x0 0x8 0x0)
0x422fec : 0x197543 (0x8 0x0 0x0 0x17b7000) Backtrace terminated-invalid frame pointer 0x0

Kernel version:
Darwin Kernel Version 8.4.1: Tue Jan 3 18:23:53 PST 2006; root:xnu-792.7.90.obj-1/RELEASE_I386

 

my hardware is a Uniwill 258Ka0 laptop with AMD64 3200+ (SSE2 only)

specs here: http://uniwill.com/products/performance/25...hp?HL=2&P=2

using the 10.4.6-myz release

 

tried booting "-v cpus=1 platform=x86pc" with no luck.

 

thanks!