Jump to content

GA-965P-DS3P DSDT edited.

haris2887

By haris2887,
in General Discussion

 Share
5 posts in this topic

Recommended Posts

haris2887
haris2887
Posted
Posted

HI all...

so I Edited my DSDT.

i have a few Questions

 

System specs are:

-965p-DS3P

-e6400 Core 2 Duo CPU

-Intel® ICH8R chipset

-Marvell 8056 Gigabit Ethernet controller

-Realtek ALC888

-6600GT GFX

 

my Question is.

 

1: How do I know what patches to apply, I have fixed the errors in my DSDT.

2. What is a good way of testing DSDT edits, say the system is unable to boot with my DSDT, do i have to waste another hour re-installing OSX and patching combo update etc...?j ust to Test a DSDT edit ?

3. I was using the system for Testing before without DSDT, ([url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]) and it was giving me [ PCI configuration begin ] hang. any Ideas ?i suspect using my systems DSDT should fix it ...

 

unledajx.jpg

 

After i Apply the ALC888 patch i get the following error ..auto fix does nothing..

unledba.jpg

Link to comment
https://www.insanelymac.com/forum/topic/267216-ga-965p-ds3p-dsdt-edited/
Share on other sites
MaLd0n
MaLd0n
Posted
Posted

patch

use DSDT EDITOR

into device name_adr 0x001F0000 insert
begin
OperationRegion (LPC0, PCI_Config, 0xA4, 0x02)\n
			Field (LPC0, ByteAcc, NoLock, Preserve)\n
			{\n
				AG3E,   1\n
			}
end;
into method label DTGP remove_entry;
into definitionblock code_regex . insert
begin
Method (DTGP, 5, NotSerialized)\n
{\n
If (LEqual (Arg0, Buffer (0x10)\n
		{\n
			/* 0000 */	0xC6, 0xB7, 0xB5, 0xA0, 0x18, 0x13, 0x1C, 0x44, \n
			/* 0008 */	0xB0, 0xC9, 0xFE, 0x69, 0x5E, 0xAF, 0x94, 0x9B\n
		}))\n
{\n
	If (LEqual (Arg1, One))\n
	{\n
		If (LEqual (Arg2, Zero))\n
		{\n
			Store (Buffer (One)\n
				{\n
					0x03\n
				}, Arg4)\n
			Return (One)\n
		}\n
		If (LEqual (Arg2, One))\n
		{\n
			Return (One)\n
		}\n
	}\n
}\n
Store (Buffer (One)\n
	{\n
		0x00\n
	}, Arg4)\n
Return (Zero)\n
}
end;
into method label _DSM parent_adr 0x001D0007 remove_entry;
into device name_adr 0x001D0007 insert
begin
Method (_DSM, 4, NotSerialized)\n
{\n
Store (Package (0x04)\n
{\n
"AAPL,clock-id",\n
Buffer (One)\n
{\n
0x01\n
},\n
"device_type",\n
Buffer (0x05)\n
{\n
"EHCI"\n
}\n
}, Local0)\n
DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))\n
Return (Local0)\n
}
end;
into method label _DSM parent_adr 0x001A0007 remove_entry;
into device name_adr 0x001A0007 insert
begin
Method (_DSM, 4, NotSerialized)\n
{\n
Store (Package (0x04)\n
{\n
"AAPL,clock-id",\n
Buffer (One)\n
{\n
0x02\n
},\n
"device_type",\n
Buffer (0x05)\n
{\n
"EHCI"\n
}\n
}, Local0)\n
DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))\n
Return (Local0)\n
}
end;
into device label PWRB code_regex (Name\s\()_HID(\,\sEisaId\s\(\"PNP0C0C\"\)\)) replace_matched begin %1_CID%2 end;
into method label _STA parent_hid PNP0103 remove_entry;
into device name_hid PNP0103 insert
begin
Method (_STA, 0, NotSerialized)\n
{\n
Return (0x0F)\n
}
end;
into method label _CRS parent_hid PNP0103 remove_entry;
into device name_hid PNP0103 insert
begin
Method (_CRS, 0, NotSerialized)\n
{\n
Return (ATT3)\n
}
end;
into device name_hid PNP0000 code_regex IRQNoFlags\s\(\)\n\s+\{(\d+)\} remove_matched;
into device name_hid PNP0100 code_regex IRQNoFlags\s\(\)\n\s+\{(\d+)\} remove_matched;
into device name_hid PNP0B00 code_regex IRQNoFlags\s\(\)\n\s+\{(\d+)\} remove_matched;
into device name_hid PNP0103 code_regex_not IRQNoFlags code_regex Name\s\(([^,]+),\sResourceTemplate\s\(\)\n\s+\{((?:.|\n)*)\}\) replace_matched
begin
Name (%1, ResourceTemplate ()\n
				{\n
					IRQNoFlags ()\n
						{0}\n
					IRQNoFlags ()\n
						{8}\n
%2
})
end;
into method label _DSM parent_adr 0x001F0000 remove_entry;
into device name_adr 0x001F0000 insert
begin
Method (_DSM, 4, NotSerialized)\n
{\n
Store (Package (0x02)\n
	{\n
		"device-id", \n
		Buffer (0x04)\n
		{\n
			0x15, 0x28, 0x00, 0x00\n
		}\n
	}, Local0)\n
DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))\n
Return (Local0)\n
}
end;
into device label SPKR remove_entry;
into device label FDC remove_entry;
into device label FDC0 remove_entry;
into device label LPT1 remove_entry;
into device label LPTE remove_entry;
into device label ECP1 remove_entry;
into device label MEM remove_entry;
into device label ^^RMEM remove_entry;
into device label IDE1 set_label begin SATA end;
into device label USB0 set_label begin UHC1 end;
into device label USB1 set_label begin UHC2 end;
into device label USB2 set_label begin UHC3 end;
into device label USB3 set_label begin UHC4 end;
into device label USB4 set_label begin UHC5 end;
into device label USB5 set_label begin UHC6 end;
into device label USBE set_label begin EHC1 end;
into device label USE2 set_label begin EHC2 end;
into_all all code_regex USB0 replaceall_matched begin UHC1 end;
into_all all code_regex USB1 replaceall_matched begin UHC2 end;
into_all all code_regex USB2 replaceall_matched begin UHC3 end;
into_all all code_regex USB3 replaceall_matched begin UHC4 end;
into_all all code_regex USB4 replaceall_matched begin UHC5 end;
into_all all code_regex USB5 replaceall_matched begin UHC6 end;
into_all all code_regex USBE replaceall_matched begin EHC1 end;
into_all all code_regex USE2 replaceall_matched begin EHC2 end;
into device name_hid PNP0B00 code_regex (IO\s\((?:\s*[^,]+,\s*(?:\/\/\s.*)?\s*\n)+\s*)(\dx\d+)(,\s*(?:\/\/\s.*)?\s*\n\s*\)) replace_matched begin %10x02%3 end;
into method label _WAK code_regex Return\s\(\s*\n?\s*Package\s*\n?\s*\(0x02\)\s*\n?\s*\{\s*\n?(?:\s*Zero,?\s*\n?){2}\s*\}\s*\n?\s*\) remove_matched;
into method label _WAK insert
begin
Return (Package (0x02)\n
{\n
Zero, \n
Zero\n
})
end;
into method label \_WAK code_regex Return\s\(\s*\n?\s*Package\s*\n?\s*\(0x02\)\s*\n?\s*\{\s*\n?(?:\s*Zero,?\s*\n?){2}\s*\}\s*\n?\s*\) remove_matched;
into method label \_WAK insert
begin
Return (Package (0x02)\n
{\n
Zero, \n
Zero\n
})
end;
into method label _PTS code_regex (If\s*\(LEqual\s*\(Arg0,\s*0x05\)\)\s*\n\s*\{\s*\n)(?:[^\n\}]+\n)+(\s*\}) replace_matched
begin
%1
		Store (One, \\_SB.PCI0.PX40.AG3E)\n
		Store (Zero, SLPE)\n
		Sleep (0x10)\n
%2\n
Else\n
{\n
Store (Zero, \\_SB.PCI0.PX40.AG3E)\n
}
end;
into method label \_PTS code_regex (If\s*\(LEqual\s*\(Arg0,\s*0x05\)\)\s*\n\s*\{\s*\n)(?:[^\n\}]+\n)+(\s*\}) replace_matched
begin
%1
		Store (One, \\_SB.PCI0.PX40.AG3E)\n
		Store (Zero, SLPE)\n
		Sleep (0x10)\n
%2\n
Else\n
{\n
Store (Zero, \\_SB.PCI0.PX40.AG3E)\n
}
end;
into definitionblock code_regex . code_regex_not OperationRegion\s*\(PMRS insert
begin
OperationRegion (PMRS, SystemIO, 0x0430, One)\n
Field (PMRS, ByteAcc, NoLock, Preserve)\n
{\n
	,   4, \n
SLPE,   1\n
}
end;
into device name_adr 0x001B0000 set_label
begin
HDEF
end;
into_all all code_regex AZAL replaceall_matched
begin
HDEF
end;
into method label _DSM parent_adr 0x001F0003 remove_entry;
into device name_adr 0x001F0003 insert
begin
Device (BUS0)\n
			{\n
				Name (_CID, "smbus")\n
				Name (_ADR, Zero)\n
				Device (DVL0)\n
				{\n
					Name (_ADR, 0x57)\n
					Name (_CID, "diagsvault")\n
					Method (_DSM, 4, NotSerialized)\n
					{\n
						Store (Package (0x02)\n
							{\n
								"address", \n
								0x57\n
							}, Local0)\n
						DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))\n
						Return (Local0)\n
					}\n
				}\n
			}
end;
into device label HDEF insert
begin
Method (_DSM, 4, NotSerialized)\n
{\n
	Store (Package (0x04)\n
		{\n
			"layout-id", \n
			Buffer (0x04)\n
			{\n
				0x0C, 0x00, 0x00, 0x00\n
			}, \n
			"PinConfigurations", \n
			Buffer (Zero) {}\n
		}, Local0)\n
	DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))\n
	Return (Local0)\n
}
end;
into_all all code_regex Or\s\(0x03,\sPARM\) replaceall_matched
begin
Or (PARM, 0x03, PARM)
end

 Share
Go to topic listing
×
×
  • Create New...