steelzeh Posted August 2, 2011 Share Posted August 2, 2011 i have set my sata to ahci and that, and after i load up with [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url], i eject it and put my mac os x dvd in and click f5 after a bit, i boot the mac os x 10.6 dvd, and then once it shows me the apple logo and the spinning wheel/ring it just freezes there, the ring continues spinning and it still is spinning, as i type right now on my laptop, its amlost been half hour, and still nothing is happening. my specs. CPU= Intel i5 - 2400 3,1 GHz Motherboard= ASUS P8H61-M RAM=4GB DDR3 GPU=Asus Ati Radeon HD 6850 1Gb DDR5 HDD=Samsuung 1TB SATA II PSU=OZC 700W Help please.... i also tried the -x -v PCIRootGUI=1 and it gave me this: Then i found out that my sata ports were set to 6Gb/s then i switched them to 3 Gb/S and still the same problem Link to comment https://www.insanelymac.com/forum/topic/264480-stuck-at-loadin-screen-help/ Share on other sites More sharing options...
aufa333 Posted August 6, 2011 Share Posted August 6, 2011 it happened with me and it was related to the vga card kext + the fakesmc 'follow the usb method and include those 2 to ur E/E folder + use GraphicsEnabler=no in ur boot.plist file and u should be able to setup normaly' -btw the gray screen shouldnt take more than a 20 sec or so ,so anything more than a couple of mins _be sure there is something missing. Link to comment https://www.insanelymac.com/forum/topic/264480-stuck-at-loadin-screen-help/#findComment-1730405 Share on other sites More sharing options...
barrysanders20 Posted March 10, 2012 Share Posted March 10, 2012 Hello. Up until today, I was having the same problem. I would receive a gray Apple loading window after installing the and older combo update and ###### or a kernel panic after installing 10.6.8 combo update. Here's what you need to do for Snow Leopard: 1. Before you attempt to install the 10.6.8 combo update, you need to install The ####### update helper. It can be found here: ######## . Update helper is required for Sandy Bridge motherboards/ processors when installing 10.6.8. 2. After you install Update Helper. Reboot your machine with your boot CD. Boot back into your Mac HD. 3. Open ####### , but don't install it. Leave the window idle in the background. Install the 10.6.8 update. After it installs, do not reboot. Install ######. In the ######## settings choose, [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]+System Utilities. 4. Once it finishes, reboot your machine without the boot CD. This is what worked for me. I am able to boot into OSX 10.6.8 normally. My rig is a: Motherboard: Asus P8H61-M LE CSM Rev. B3 Processor: Intel Core i5 2300 RAM: 8GB If you have any questions, PM me. You can also refer to this thread: ######## Link to comment https://www.insanelymac.com/forum/topic/264480-stuck-at-loadin-screen-help/#findComment-1804955 Share on other sites More sharing options...
Recommended Posts