absoluteczech Posted June 14, 2011 Share Posted June 14, 2011 Hello everyone. After days of searching i finally decide i would ask here. Since everyone here seems to know more than me I figured why keep pulling my hair out. Im currently running Leopard 10.5.7 and everythings running fine, except for my video cards Quartz Extreme. It says not supported Radeon X1300 Series: Chipset Model: Radeon X1300 Series Type: Display Bus: PCIe PCIe Lane Width: x16 VRAM (Total): 256 MB Vendor: ATI (0x1002) Device ID: 0x7146 Revision ID: 0x0000 Displays: VX922: Resolution: 1280 x 1024 @ 60 Hz Depth: 32-Bit Color Core Image: Software Main Display: Yes Mirror: Off Online: Yes Quartz Extreme: Not Supported Rotation: Supported QuartzGL: Supported Display Connector: Status: No Display Connected everyone on the internet says it should just load properly and there should be no adjustments needed. Any and all information i also find seems to be for 10.5.6 or lower usually 10.5.4 LSPCI says this 01:00.1 Display controller [0380]: ATI Technologies Inc RV515 [Radeon X1300] (Secondary) [1002:7166] but device id says something else? it's a PCI-Express card with DVI connection (which im using) Please help? Hope i didnt leave anything out, if i did please let me know. thanks! Link to comment https://www.insanelymac.com/forum/topic/259343-ati-radeon-x1300-need-help-getting-qe-supported-on-1057/ Share on other sites More sharing options...
absoluteczech Posted June 15, 2011 Author Share Posted June 15, 2011 just wanted to update and say that this morning i updated to 10.5.8 and after it rebooted i had QE enabled and working only had to repair 1 kext (network that got messed up) Hello everyone. After days of searching i finally decide i would ask here. Since everyone here seems to know more than me I figured why keep pulling my hair out. Im currently running Leopard 10.5.7 and everythings running fine, except for my video cards Quartz Extreme. It says not supported Radeon X1300 Series: Chipset Model: Radeon X1300 Series Type: Display Bus: PCIe PCIe Lane Width: x16 VRAM (Total): 256 MB Vendor: ATI (0x1002) Device ID: 0x7146 Revision ID: 0x0000 Displays: VX922: Resolution: 1280 x 1024 @ 60 Hz Depth: 32-Bit Color Core Image: Software Main Display: Yes Mirror: Off Online: Yes Quartz Extreme: Not Supported Rotation: Supported QuartzGL: Supported Display Connector: Status: No Display Connected everyone on the internet says it should just load properly and there should be no adjustments needed. Any and all information i also find seems to be for 10.5.6 or lower usually 10.5.4 LSPCI says this 01:00.1 Display controller [0380]: ATI Technologies Inc RV515 [Radeon X1300] (Secondary) [1002:7166] but device id says something else? it's a PCI-Express card with DVI connection (which im using) Please help? Hope i didnt leave anything out, if i did please let me know. thanks! Link to comment https://www.insanelymac.com/forum/topic/259343-ati-radeon-x1300-need-help-getting-qe-supported-on-1057/#findComment-1698343 Share on other sites More sharing options...
Recommended Posts