MC-Nugget Posted May 31, 2011 Share Posted May 31, 2011 Hi, I have a problem installing iAtkos S3 V2 on my PC. The first issue I had was that after booting up the DVD it showed the grey screen with the apple logo for the half of a second and the rebooted all of a sudden. After entering busratio=22 I could pass this problem. But now I have a new one: After the first grey screen disappered the second one came, where I was able to move the mouse while the PC was still loading files. The coursor also changed to the "spinning circle" and back to the pointer but then, all of a sudden the screen gets black and the PC shuts down. I think this is just before you should be able to choose a language because on another machine I can easily reach this next step with the same DVD. On the last black screen, there is something written but it only appears for a very short time. So I can only guess what it says. I think it's something like stop loadin kext.... I hope you can help me with my problem. I already tried various entries while booting like -v -x -f mamem=2048 cpus=1 etc. in different variations but nothing helped... I also opened the PC and removed the wifi card and the GTX460 but nothing changed. I also tried many different settings in the BIOS but that either didn't fix the problem. The hardware configuration is the following: Intel Core i3 530 2,93GHz Asrock H55M/USB3 4gb ram EVGA Nvidia GTX460 768mb LiteOn iHOS104 Blu-ray drive Thanks in advance! ...and please excuse my language mistakes... Link to comment Share on other sites More sharing options...
MC-Nugget Posted June 4, 2011 Author Share Posted June 4, 2011 I now tried various Boot CD's and also SnowOSX 3.6 but nothing will work... Anyone has a hint for me? As already mentioned I can get to the point where I am able to move the mouse but just before the language selection, the PC shuts down all of a sudden. Link to comment Share on other sites More sharing options...
marwi Posted June 6, 2011 Share Posted June 6, 2011 Hello, you solved the problem? I have the same configuration with H55M/USB3 I followed a guide with original Snow Leopard, and I can end it. The first reboot I do it with [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url], then install the DSDTSE, extract the file and put it in descktop, then start the ComboUpdate [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] 10.6.7 and finally choosing "userDSDT and install" system utilities. On reboot I get the new boot loader and successivamenet the gray background with the apple logo, but will remain fixed at that point and I have to force a restart. If I boot in verbose mode, the system stops at this line: disk1s1s2: ioctl (_IOR, 'd', 79.4) is unsupported I tried with another hard drive but nothing What can you do? Link to comment Share on other sites More sharing options...
MC-Nugget Posted June 6, 2011 Author Share Posted June 6, 2011 I wasn't even able to install Snow Leopard because the system shuts down just before I can even choose anything. What was your approach? Did you use [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] and a standard retail Snow Leopard DVD? Which boot options did you use? Link to comment Share on other sites More sharing options...
marwi Posted June 7, 2011 Share Posted June 7, 2011 I wasn't even able to install Snow Leopard because the system shuts down just before I can even choose anything. What was your approach? Did you use [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] and a standard retail Snow Leopard DVD? Which boot options did you use? i've followed this guide http://www.tonymacx86.com/viewtopic.php?f=...8&view=next i've used Retail Snow Leopard with [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]! the installation is correct but i don't able to start system without [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]... if i install combo update the system not restart... i've tried with more and more option.. and version of DSDT and .. driver in to [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] but never result. if you have some solution... Link to comment Share on other sites More sharing options...
MC-Nugget Posted June 7, 2011 Author Share Posted June 7, 2011 I'll try your installation method as soon as I get a retail DVD and will tell you if i could get it to work Link to comment Share on other sites More sharing options...
marwi Posted June 7, 2011 Share Posted June 7, 2011 good, tanks! i attend your information... today i tried DSDT configuration for H55M/pro USB3 but with this configuration the system crash... no work! Link to comment Share on other sites More sharing options...
Recommended Posts