curtis100 Posted May 27, 2011 Share Posted May 27, 2011 Hi there I've setup osx 10.5.2 Leo4all on my Asus A6vm. With a little tweaking and a change of WIFI card everything is running nicely...except that if I try to start the laptop up using only the battery I get a Kernel Panic. I'll put as much info as I can from the screen below. Hopefully it will help anyone who glances this way. Any ideas on how to solve this issue? It's my last step to making my old laptop really work as a mac. Thanks for anything you can suggest. Info from the screen goes like this. Failed to load extension org. tgwbd.driver. ACPIPS2Nub Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPC/IDE0@1F,1/AppleIntelPIIXATARoot/CHN0@0/AppleIntelPIIXPATA/ATADeviceNub@0/AppleATADiskDriver/IOATABlockStorageDevice/IOBlockStorageDriver/FUJITSU MHV2100AT PL FUJITSU MHV21 BSD root : disk0os2, major 14, minor 2 panic(cpu 0 caller 0x001A936F) : Kernel trap at 0x001a76c8, type 0=divide error, registers: CR0: 0x8001003b, CR2: 0xa00e145f8, CR3: 0x00d6f000. CR4: 0x000006e0 EAX: 0x140b9ab, EBX: 0xd140b9ab, ECX: 0x3b9aca00, EDX: 0xfffffffe CR2: 0x2e31bd6c, EBP: 0x2e31bd88, ESI: 0xfffffffe, EDI: 0x2e31bde0 EFL: 0x0001020202, EIP: 0x001a76c8, CS: 0x00000004, DS: 0x2e31000c Error code: 0x00000000 Debugger called: <panic> Backtrace, Format - Frame : Return Address (4 potential args on stack) (more numbers) Backtrace terminated-invalid frame pointer 0 BSD process name corresponding to current thread: fsck_hfs Mac OS version: 9C31 Kernel version: Darwin Kernel Version 9.2.0: Sun Mar 2 00:35:29 SCT 2008; made by ToH:xnu-1228/BUILD/obj/RELEASE_I386 Link to comment Share on other sites More sharing options...
Recommended Posts