[AMD] Snowleopard Install help

[Aichii]

Hi i've been trying to install a few diffrent versions of OSX 86. (Kalyway,Leo4Allv2-3,iDeneb etc.) But with no succses so far.

 

Specs of the PC:

 

Processor: AMD Athlon II X2 250, Dual Core, 3.0Ghz, AM3, 2MB, 65W, Boxed

 

Motherboard: MSI GF615M-P33, Socket-AM3 m-ATX, GeForce 6150se, DDR3,SATAII, GbLAN, PCI-Ex16

 

RAM Memory: Crucial DDR3 1333MHz 4GB KIT, CL9, Kit w/two matched DDR3 2GB, 240pin

 

HDD: 2x250Gb Sata Drives

 

DVD: Standard DL Burner IDE

 

Error:

 

The error i get right now is that when i try to boot from Darwin it won't go passed the forth line or so, and then it just reboot. This is with Leo4Allv3 disk.

 

The Error comes when it try to load:

 

"Loading HFS+ file: [system/Library/Extensions.mkext] from 422d69."

 

And then it just reboots again and again.

 

Any help on this topic would be appriciated!

 

EDIT 1:

i've tested following commands in Darwin:

-v

cpus=1 -v -x

and the furthest iv'e got is with the cpus=1 -v -x command but it ends with a reboot.

 

- Aichii

 

p.s. First post here, and thanks for a great community!

[sum85]

Hi, have you try nawcommodcd? Installation went well for me, install latest chameleon rc5 to boot. I'm currently fixin up minor2 things that came up after installation. Bummer... oh, use retail snow leopard cd 10.6 then update to 10.6.5..

[Aichii]

Will test nawcommodcd, is there anything, and i mean anything i need to do before using it?

[sum85]

Err.. nothing much. Just burn Nawcommodcd to a compact disc, set you sata hardrive to AHCI mode and first boot your PC with optical drive. Just follow the instruction given. It's pretty easy to install it using Nawcommodcd. Unless you have a hexacore processor, you don't have to use -force64.